Grooving / Cutting Off Holders（Page3）

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 13,015.93
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKN Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: ₹ 1,063.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder TKR/L Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 937.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 10,451.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Block for Holding Blade, KTKTB Type (Split Type)

  KYOCERA

  [Features]
  A split tool block for holding a Kyocera's blade.
  [Applications]
  For fixing blades.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: ₹ 20,996.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)

  KYOCERA

  KTKTBF type blade holding tool block from Tsukkiru.
  [Compatible Blade]KTKB/KFTB32

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: ₹ 18,414.04
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Tool Block

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	35 ～ 120	No-hand	-	1 Corner / 2 Corner	25 ～ 50

  From: ₹ 31,655.58
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut Shank Bit for End Surface Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	4 ～ 6	8.7 ～ 10.7	Right-hand / Left-hand	-	1 Corner	25

  From: ₹ 19,791.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  T-Max Q-Cut Shank Bit for Plunging/Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	6 ～ 22	Right-hand / Left-hand	-	1 Corner	8 ～ 25

  From: ₹ 15,513.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Plunging Blade

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5 ～ 6	15 ～ 55	No-hand	-	2 Corner	25.9 ～ 31.9

  From: ₹ 15,874.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Profile Machining Shank Bit

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	4 ～ 6	4 ～ 5	Right-hand / Left-hand	-	2 Corner	20 ～ 32

  From: ₹ 21,513.69
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 3 Plunging/Grooving Shank Bit

  SANDVIK

  3-corner specification, demonstrating high productivity in shallow parting-off and grooving, single holder supports all insert widths

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5	6.4	Right-hand / Left-hand	-	3 Corner	32

  From: ₹ 13,932.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows the construction of customized tools for a variety of turning operations with a minimum number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	1.5 ～ 3	12 ～ 18	Left-hand	-	2 Corner	-

  From: ₹ 17,061.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Profiling	10 ～ 12	20 ～ 35	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head for Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding	3 ～ 15	15 ～ 65	Right-hand / Left-hand	-	1 Corner / 2 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CORO-TURN SL70, HP Cutting Head for Edge Grooving

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 6	40	Right-hand / Left-hand	300 ～ 500	2 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COROMANT CAPTO, Cutting Unit for CoroCut 1 & 2

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding	4 ～ 6	20 ～ 25	No-hand	-	2 Corner	-

  From: ₹ 31,240.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  COROMANT CAPTO, Cutting Head for CoroCut 3

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: ₹ 32,184.65
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut, Q Cut, Blade/Adapter

  SANDVIK

  Unique shape exhibits high performance

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 15	20 ～ 120	Right-hand / Left-hand	-	1 Corner / 2 Corner	25.9 ～ 101.6

  From: ₹ 17,996.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank

  SANDVIK

  [Features]
  A high clamp rigidity type boring tool bit for inner-diameter grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For inner-diameter grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	1.5 ～ 5	4.5 ～ 8	Right-hand / Left-hand	-	2 Corner	-

  From: ₹ 24,061.22
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving

  SANDVIK

  1-corner and 2-corner grooving heads that are highly versatile and cover a variety of machining

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	-	-	Left-hand	-	2 Corner	-

  From: ₹ 42,807.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3 ～ 6	4.5 ～ 8	Right-hand / Left-hand	-	2 Corner	16 ～ 25

  From: ₹ 16,231.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070

  SANDVIK

  Versatile 1-corner and 2-corner shank tool bit for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Horizontal feeding / Profiling	6	25	No-hand	-	2 Corner	25 ～ 32

  From: ₹ 19,791.24
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutting Head, CoroTurn SL70 Coupling, Flange Grooving Blade, SL70-L/R123

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Horizontal feeding	4 ～ 6	15 ～ 40	Right-hand / Left-hand	130 ～ 500	2 Corner	-

  From: ₹ 55,739.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  QS Series, Short Tool Bit, QS-SMALR/L1616E3HP

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	-	-	Right-hand / Left-hand	-	2 Corner	16

  From: ₹ 32,603.87
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	0.5-3.18	6.4	Left-hand	1	3 Corner	10

  From: ₹ 34,146.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	-	-	Left-hand	-	3 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123

  SANDVIK

  Quick change system specially developed for small automatic lathes
  A single screw removes the holder and pulls out the wedge at the same time for quick tool changes and setup

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	1.5 ～ 3	-	Right-hand / Left-hand	-	2 Corner	10 ～ 16

  From: ₹ 16,857.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L

  SANDVIK

  Sandvik Grooving/cutting off holder T-Max Q-Cut SL (Type 151.3) Internal grooving, profiling blade 570-R/L

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	5 ～ 8	8 ～ 13	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 25,334.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for parting and grooving.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  The holder strength is high thanks to the jaw.
  For parting and grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off	2 ～ 4	17 ～ 22	Right-hand / Left-hand	-	2 Corner	20 ～ 25

  From: ₹ 18,604.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	6 ～ 8	25	Right-hand / Left-hand	-	2 Corner	25 ～ 32

  From: ₹ 23,996.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Shank Tool Bit For Profiling, Screw Clamp, R/LX123-070

  SANDVIK

  [Features]
  A high clamp rigidity type shank holder for profiling.
  Securely receives lateral cutting forces using the unique rail lock seat and V-shaped seat, delivering a high level of safety. (Patented)
  For profiling.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding / Profiling	6	16	Right-hand / Left-hand	-	2 Corner	25 ～ 32

  From: ₹ 25,130.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Boring Tool Bit For Profiling R/LAX123

  SANDVIK

  Versatile 1-corner and 2-corner shank tool for profiling

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Edge surface grooving / Profiling	6 ～ 8	25	Right-hand / Left-hand	-	2 Corner	37

  From: ₹ 50,484.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut MB Adapter (Cylindrical Shank) Steel Tool Bit, Internally Lubricated, MB-A-R

  SANDVIK

  [Features]
  A CoroCut MB adapter (cylindrical shank), steel tool bit internal coolant type.
  Please check the sheet size before ordering.
  [Cutting Direction]Right
  [Applications]
  Can be used for grooving, etc.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	Right-hand	-	-	-

  From: ₹ 18,959.47
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut SL Blade Screw Clamp For Fluting And End Surface Grooving 570-R/L123-C

  SANDVIK

  CoroTurn SL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Horizontal feeding	3 ～ 6	3.5 ～ 4.5	Right-hand / Left-hand	-	2 Corner	-

  From: ₹ 15,513.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut XS SL 570-R/LSMAL

  SANDVIK

  Versatile small part machining system for outer diameter machining
  Extremely sharp cutting edge with excellent performance at low feed

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Cutting off / Profiling	-	8.2	Right-hand / Left-hand	-	-	-

  From: ₹ 16,231.13
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRSCR/L-35-09

  SANDVIK

  CoroTurnSL is a modular system of adapters and cutting heads that allows you to build customized tools for a wide variety of turning operations with a minimal number of items

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving / Profiling	9	35	Right-hand / Left-hand	-	1 Corner	-

  From: ₹ 46,366.15
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R/LF150.23

  SANDVIK

  Sandvik Grooving/Parting Off Holder Ceramic Grooving and Profiling Insert Bit Screw Clamp R/LF150.23

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Outer Diameter Grooving	3.17 ～ 6.35	19 ～ 29	Right-hand / Left-hand	-	1 Corner	32

  From: ₹ 20,065.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroCut 1/2 Head For Grooving, High Pressure Coolant Technology SL70-R/LG-C

  SANDVIK

  Highly versatile 1-corner and 2-corner grooving heads that achieve high productivity

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving / Profiling	-	-	Right-hand	-	2 Corner	-

  From: ₹ 42,807.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Coat Paratip (for Cutting/Grooving) Holder

  KOSHUHA

  [Features]
  · Blade edging / mold polishing not required, enabling immediate use.
  · The specially shaped tip eliminates chatter while cutting.
  · TiN coating and TiAlN coating greatly improve wear resistance, heat resistance, and chipping resistance, as well as bumping up tool working life by 3-10 times.
  [Applications]
  · For cutting off/grooving.
  [Material]
  · Carbon Structural Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	16 ～ 25

  From: ₹ 14,905.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, GFVT Type

  KYOCERA

  A clamp-on holder for face grooving.
  Modular (blade).

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: ₹ 15,426.57
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  T-Max Q-Cut, Shank Tool Bit for Parting-Off and Grooving

  SANDVIK

  [Features]
  ·A shank tool bit for parting-off grooving and turning
  ・ By adopting a screw clamp, the clamp rigidity is high and stable processing is possible
  [Applications]
  ·For parting-off, flange machining and grooving

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving / Cutting off	-	-	-	-	-	-

  From: ₹ 21,679.78
  Days to Ship: 11 Day(s) or more

  11 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Sandvik CoroCut 1/2 Plunging/Grooving Boring Bit

  SANDVIK

  [Features]
  · A boring bit with high clamp rigidity for inner diameter grooving.
  · Unique rail locking seat and V-type seat securely receive lateral cutting force, delivering highly stable machining. (Patent Acquired)
  [Applications]
  · For inner diameter grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Inner Diameter Grooving	-	-	-	-	-	-

  From: ₹ 45,717.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder KFMS

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For multi-function, face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: ₹ 19,021.62
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Kyocera, Grooving Holder, SF Type

  KYOCERA

  [Features]·SF type [Applications] Flange grooving holder, GFVS / GFVT type flange grooving blade

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: ₹ 4,478.64
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	SANDVIK	KOSHUHA	KYOCERA	SANDVIK	SANDVIK	KYOCERA	KYOCERA
Product Series	Lathe Turning/Cutting Holder KGD-S Model (Straight Type: 0°, Parting Type)	Cutter Holder TKN Type	Cutter Holder TKR/L Type	Punching Blade KTKB-S Type	Tool Block for Holding Blade, KTKTB Type (Split Type)	Tool Block for Holding Blade, KTKTBF Type (Split Type/Perpendicular Type)	T-Max Q-Cut Tool Block	T-Max Q-Cut Shank Bit for End Surface Grooving	T-Max Q-Cut Shank Bit for Plunging/Grooving	CoroCut 1/2 Plunging Blade	CoroCut 1/2 Profile Machining Shank Bit	CoroCut 3 Plunging/Grooving Shank Bit	CORO-TURN SL, Plunging and Grooving Blade for CoroCut 1/2	CORO-TURN SL70, HP Cutting Head	CORO-TURN SL70, HP Cutting Head for Grooving	CORO-TURN SL70, HP Cutting Head for Edge Grooving	COROMANT CAPTO, Cutting Unit for CoroCut 1 & 2	COROMANT CAPTO, Cutting Head for CoroCut 3	CoroCut, Q Cut, Blade/Adapter	CoroCut 1/2 Boring Tool Bit R/LAG 123 Cylindrical Shank	Grooving Tool, Profiling Tool, And Turning Tool Blades For CoroCut 1/2 Head For Grooving	CoroCut 1/2 Shank Tool Bit For Shallow Grooving & Face Grooving R/LF123	CoroCut 1/2 Shank Tool Bit For Profiling R/LX123...-070	Cutting Head, CoroTurn SL70 Coupling, Flange Grooving Blade, SL70-L/R123	QS Series, Short Tool Bit, QS-SMALR/L1616E3HP	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF	Short Tool Bit For QS Holding System, Cut-Off/Grooving Tool QS-R/LF123	Sandvik, CoroCut 1/2, QS Shank Tool Bit, Parting-off and Grooving, QS-R/LF123	T-Max Q-Cut SL (Type 151.3) Blade For Internal Diameter Grooving And Profiling 570-R/L	CoroCut Reinforced Shank Tool Bit For Parting With Small 1/2 f1 Offset, R/LF123	CoroCut 1/2 Shank Tool Bit Screw Clamp For Profiling R/LX123-007	CoroCut 1/2 Shank Tool Bit For Profiling, Screw Clamp, R/LX123-070	CoroCut 1/2 Boring Tool Bit For Profiling R/LAX123	CoroCut MB Adapter (Cylindrical Shank) Steel Tool Bit, Internally Lubricated, MB-A-R	CoroCut SL Blade Screw Clamp For Fluting And End Surface Grooving 570-R/L123-C	CoroCut XS SL 570-R/LSMAL	CoroTurn SL70, Cutting Head, Coupling, Round Inserts, SL70-CRSCR/L-35-09	Tool Bit Screw Clamp For Ceramic Grooving And Profiling Inserts R/LF150.23	CoroCut 1/2 Head For Grooving, High Pressure Coolant Technology SL70-R/LG-C	High Coat Paratip (for Cutting/Grooving) Holder	Kyocera, Grooving Holder, GFVT Type	T-Max Q-Cut, Shank Tool Bit for Parting-Off and Grooving	Sandvik CoroCut 1/2 Plunging/Grooving Boring Bit	Grooving Holder KFMS	Kyocera, Grooving Holder, SF Type
From	₹ 13,015.93	₹ 1,063.02	₹ 937.13	₹ 10,451.35	₹ 20,996.38	₹ 18,414.04	₹ 31,655.58	₹ 19,791.24	₹ 15,513.22	₹ 15,874.85	₹ 21,513.69	₹ 13,932.73	₹ 17,061.55	₹ 55,739.24	₹ 55,739.24	₹ 55,739.24	₹ 31,240.38	₹ 32,184.65	₹ 17,996.45	₹ 24,061.22	₹ 42,807.38	₹ 16,231.13	₹ 19,791.24	₹ 55,739.24	₹ 32,603.87	₹ 34,146.85	₹ 16,857.96	₹ 16,857.96	₹ 25,334.56	₹ 18,604.53	₹ 23,996.93	₹ 25,130.05	₹ 50,484.78	₹ 18,959.47	₹ 15,513.22	₹ 16,231.13	₹ 46,366.15	₹ 20,065.82	₹ 42,807.38	₹ 14,905.13	₹ 15,426.57	₹ 21,679.78	₹ 45,717.89	₹ 19,021.62	₹ 4,478.64
Days to Ship	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	11 Day(s) or more	5 Day(s) or more	9 Day(s) or more	7 Day(s) or more
Application	-	-	-	-	-	-	Cutting off	Edge surface grooving	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Horizontal feeding / Profiling	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving / Profiling	Outer Diameter Grooving / Horizontal feeding	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off / Horizontal feeding	-	Outer Diameter Grooving / Cutting off	Inner Diameter Grooving / Profiling	Inner Diameter Grooving / Profiling	Outer Diameter Grooving	Outer Diameter Grooving / Cutting off / Horizontal feeding / Profiling	Edge surface grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Cutting off	Inner Diameter Grooving / Profiling	Outer Diameter Grooving / Cutting off	Outer Diameter Grooving / Horizontal feeding / Profiling	Outer Diameter Grooving / Horizontal feeding / Profiling	Inner Diameter Grooving / Edge surface grooving / Profiling	Inner Diameter Grooving	Outer Diameter Grooving / Horizontal feeding	Outer Diameter Grooving / Cutting off / Profiling	Outer Diameter Grooving / Profiling	Outer Diameter Grooving	Inner Diameter Grooving / Profiling	-	Edge surface grooving	Edge surface grooving / Cutting off	Inner Diameter Grooving	Edge surface grooving	Edge surface grooving
Groove Width(mm)	-	-	-	-	-	-	-	4 ～ 6	2 ～ 4	1.5 ～ 6	4 ～ 6	1.5	1.5 ～ 3	10 ～ 12	3 ～ 15	4 ～ 6	4 ～ 6	-	2 ～ 15	1.5 ～ 5	-	3 ～ 6	6	4 ～ 6	-	0.5-3.18	-	1.5 ～ 3	5 ～ 8	2 ～ 4	6 ～ 8	6	6 ～ 8	-	3 ～ 6	-	9	3.17 ～ 6.35	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	35 ～ 120	8.7 ～ 10.7	6 ～ 22	15 ～ 55	4 ～ 5	6.4	12 ～ 18	20 ～ 35	15 ～ 65	40	20 ～ 25	-	20 ～ 120	4.5 ～ 8	-	4.5 ～ 8	25	15 ～ 40	-	6.4	-	-	8 ～ 13	17 ～ 22	25	16	25	-	3.5 ～ 4.5	8.2	35	19 ～ 29	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	-	Right-hand / Left-hand	Right-hand	-	-	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	-	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	-	-	-	-	-	-
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	300 ～ 500	-	-	-	-	-	-	-	130 ～ 500	-	1	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	1 Corner / 2 Corner	1 Corner	1 Corner	2 Corner	2 Corner	3 Corner	2 Corner	1 Corner	1 Corner / 2 Corner	2 Corner	2 Corner	-	1 Corner / 2 Corner	2 Corner	2 Corner	2 Corner	2 Corner	2 Corner	2 Corner	3 Corner	3 Corner	2 Corner	1 Corner	2 Corner	2 Corner	2 Corner	2 Corner	-	2 Corner	-	1 Corner	1 Corner	2 Corner	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	25 ～ 50	25	8 ～ 25	25.9 ～ 31.9	20 ～ 32	32	-	-	-	-	-	-	25.9 ～ 101.6	-	-	16 ～ 25	25 ～ 32	-	16	10	10 ～ 16	10 ～ 16	-	20 ～ 25	25 ～ 32	25 ～ 32	37	-	-	-	-	32	-	16 ～ 25	-	-	-	-	-

Loading...