What is an induction motor?

An induction motor is an AC motor widely used in various industries and applications. It operates on the principle of electromagnetic induction to produce rotational motion.

What are the advantages of using induction motors?

Induction motors are known for their simplicity, durability, and low maintenance requirements. They are also cost-effective and capable of operating under a wide range of power factors.

Can I use capacitors other than those provided with the AC motor?

As a rule, please use the capacitor that comes with the motor. However, in emergency situations, such as if the original capacitor is lost, you may use a non-polarized film capacitor intended for motors, with the same capacitance and rated voltage as the original. The capacitor included with the product is an essential component for ensuring the motor performs as specified. Using an incorrect capacitance can lead to reduced torque, rotational vibration, or overheating. Incorrect voltage ratings can cause capacitor damage, potentially leading to smoke or fire, so please be very careful.

What is the overrun amount of an induction motor?

When operated under no-load conditions, the overrun amount at the motor's output shaft (as a reference value) is 30 to 40 rotations. The actual overrun amount can vary depending on the load torque due to friction and the load's moment of inertia. Additionally, if a gearhead is used, the overrun amount at the gear output shaft is calculated by dividing the overrun amount at the motor output shaft by the reduction ratio of the gearhead. *Overrun refers to the extent of movement beyond the intended stop point after the motor's power is turned off during operation.

What kind of Safety Standards is compliant to?

All World K Series models have a built-in overheat protection device and conform to major international safety standards. UL/CSA, CE Marking (Low Voltage Directive), models certified under CCC (China Compulsory Certification system) are also available.

What is the operating ambient temperature?

It depends on the capacity as follows. For 1 W and 3 W motors: -10 to +40 °C (must not freeze) For 6 W to 90 W motors with single-phase 100 V, single-phase 200 V, and three-phase 200 V: -10 to +50 °C (must not freeze) For other voltages: -10 to +40 °C (must not freeze)

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(32 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

0IK1A-A

Square Flange Dim. A Rated Output Power Supply Voltage Shaft end shape Connection type Fan type Days to Ship

Specification/Dimensions

Square Flange Dim. A(mm)
42

60

70

80

90
Clear
Rated Output(W)
1

3

6

15

25

40

60

90
Clear
Power Supply
Single-phase

Three-Phase
Clear
Voltage(V)
100

200

220
Clear
Shaft end shape
- Pinion shaft type
- Round shaft type
Clear
Connection type
- Lead Wire
- Small terminal box included
Clear
Fan
- Available
Clear
type
- K-0IK
- K-2IK
- K-3IK
- K-4IK
- K-5IK
Clear

Days to Ship

All

6 Day(s) or Less

28 Day(s) or Less

29 Day(s) or Less
Clear

Specify Alterations

Induction Motor, K Series (Part Number)

Name: Induction Motor, K Series
Brand: ORIENTAL MOTOR
Availability: PreOrder

Check FAQ of this product (6 items)

Brand :

ORIENTAL MOTOR

Part Number :

0IK1A-A

0IK1GN-A

0IK1GN-C

0IK3A-B

0IK3A-D

0IK3GN-B

0IK3GN-D

2IK6A-A

2IK6GN-A

2IK6GN-C

3IK15A-A

3IK15GN-A

3IK15GN-C

4IK25A-A

4IK25GN-A

4IK25GN-C

4IK25GN-CT

4IK25GN-S

4IK25GN-ST

5IK40A-A

0IK1A-A

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Data unavailable

(i)
Caution

Some of the items are scheduled to be discontinued as of end of March in 2023. The manufacturer keep the items produced but they are not available with Misumi.
There are not the replacement items and the plan to resumption of sale. Please check the quotation and order screen for details.

Product Description

ORIENTAL MOTOR Induction Motor, K series
[Features]
•Motor Type: Induction Motor
•Square Flange Dimensions/A Min./Max. (mm): 42 / 90
•Rated Output Min./Max. (W): 1 / 90
•Power Supply: Single Phase, 3 Phases
•Rated Voltage(V): 100, 200, 220
•Shaft Shape: Pinion Shaft, Round Shaft
•Connection type: Lead wire, Terminal box

: 30; 60; 90

Part Number
0IK1A-A
0IK1GN-A
0IK1GN-C
0IK3A-B
0IK3A-D
0IK3GN-B
0IK3GN-D
2IK6A-A
2IK6GN-A
2IK6GN-C
3IK15A-A
3IK15GN-A
3IK15GN-C
4IK25A-A
4IK25GN-A
4IK25GN-C
4IK25GN-CT
4IK25GN-S
4IK25GN-ST
5IK40A-A
5IK40GN-A
5IK40GN-C
5IK40GN-ST
5IK60GU-AF
5IK60GU-CF
5IK60GU-SF
5IK60GU-STF
5IK90A-AF
5IK90GU-AF
5IK90GU-CF
5IK90GU-SF
5IK90GU-STF

Price	Minimum Order Qty.	Days to Ship	Square Flange Dim. A (mm)	Rated Output (W)	Power Supply	Voltage (V)	Shaft end shape	Connection type	Fan	Model Number Symbol
₹ 6,618.98	1 Piece(s)	6 Day(s) or more	42	1	Single-phase	100	Round shaft type	Lead Wire	-	-A (4-Pole)
₹ 6,669.87	1 Piece(s)	6 Day(s) or more	42	1	Single-phase	100	Pinion shaft type	Lead Wire	-	-A (4-Pole)
₹ 6,839.98	1 Piece(s)	6 Day(s) or more	42	1	Single-phase	200	Pinion shaft type	Lead Wire	-	-C (4-Pole)
₹ 6,889.55	1 Piece(s)	6 Day(s) or more	42	3	Single-phase	100	Round shaft type	Lead Wire	-	-B (2-Pole)
₹ 7,074.38	1 Piece(s)	6 Day(s) or more	42	3	Single-phase	200	Round shaft type	Lead Wire	-	-D (2-Pole)
₹ 6,889.55	1 Piece(s)	6 Day(s) or more	42	3	Single-phase	100	Pinion shaft type	Lead Wire	-	-B (2-Pole)
₹ 7,074.38	1 Piece(s)	6 Day(s) or more	42	3	Single-phase	200	Pinion shaft type	Lead Wire	-	-D (2-Pole)
₹ 6,353.85	1 Piece(s)	6 Day(s) or more	60	6	Single-phase	100	Round shaft type	Lead Wire	-	-A (4-Pole)
₹ 6,404.75	1 Piece(s)	6 Day(s) or more	60	6	Single-phase	100	Pinion shaft type	Lead Wire	-	-A (4-Pole)
₹ 6,624.40	1 Piece(s)	6 Day(s) or more	60	6	Single-phase	200	Pinion shaft type	Lead Wire	-	-C (4-Pole)
₹ 7,103.96	1 Piece(s)	6 Day(s) or more	70	15	Single-phase	100	Round shaft type	Lead Wire	-	-A (4-Pole)
₹ 7,103.96	1 Piece(s)	6 Day(s) or more	70	15	Single-phase	100	Pinion shaft type	Lead Wire	-	-A (4-Pole)
₹ 7,275.40	1 Piece(s)	6 Day(s) or more	70	15	Single-phase	200	Pinion shaft type	Lead Wire	-	-C (4-Pole)
₹ 8,025.51	1 Piece(s)	6 Day(s) or more	80	25	Single-phase	100	Round shaft type	Lead Wire	-	-A (4-Pole)
₹ 8,025.51	1 Piece(s)	6 Day(s) or more	80	25	Single-phase	100	Pinion shaft type	Lead Wire	-	-A (4-Pole)
₹ 8,321.51	1 Piece(s)	28 Day(s) or more	80	25	Single-phase	200	Pinion shaft type	Lead Wire	-	-C (4-Pole)
₹ 9,265.00	1 Piece(s)	28 Day(s) or more	80	25	Single-phase	200	Pinion shaft type	Small terminal box included	-	-C (4-Pole)
₹ 9,265.00	10 Piece(s)	29 Day(s) or more	80	25	Three-Phase	200 ～ 220	Pinion shaft type	Lead Wire	-	-S (4-Pole)
₹ 9,314.36	1 Piece(s)	28 Day(s) or more	80	25	Three-Phase	200 ～ 220	Pinion shaft type	Small terminal box included	-	-S (4-Pole)
₹ 10,093.02	1 Piece(s)	6 Day(s) or more	90	40	Single-phase	100	Round shaft type	Lead Wire	-	-A (4-Pole)
₹ 10,142.55	1 Piece(s)	6 Day(s) or more	90	40	Single-phase	100	Pinion shaft type	Lead Wire	-	-A (4-Pole)
₹ 10,437.24	1 Piece(s)	28 Day(s) or more	90	40	Single-phase	200	Pinion shaft type	Lead Wire	-	-C (4-Pole)
₹ 11,431.40	1 Piece(s)	29 Day(s) or more	90	40	Three-Phase	200 ～ 220	Pinion shaft type	Small terminal box included	-	-S (4-Pole)
₹ 11,884.47	1 Piece(s)	28 Day(s) or more	90	60	Single-phase	100	Pinion shaft type	Lead Wire	Available	-A (4-Pole)
₹ 12,339.85	1 Piece(s)	28 Day(s) or more	90	60	Single-phase	200	Pinion shaft type	Lead Wire	Available	-C (4-Pole)
₹ 12,389.42	1 Piece(s)	28 Day(s) or more	90	60	Three-Phase	200 ～ 220	Pinion shaft type	Lead Wire	Available	-S (4-Pole)
₹ 13,458.60	1 Piece(s)	28 Day(s) or more	90	60	Three-Phase	200 ～ 220	Pinion shaft type	Small terminal box included	Available	-S (4-Pole)
₹ 13,873.87	1 Piece(s)	6 Day(s) or more	90	90	Single-phase	100	Round shaft type	Lead Wire	Available	-A (4-Pole)
₹ 13,873.87	1 Piece(s)	6 Day(s) or more	90	90	Single-phase	100	Pinion shaft type	Lead Wire	Available	-A (4-Pole)
₹ 14,329.25	1 Piece(s)	28 Day(s) or more	90	90	Single-phase	200	Pinion shaft type	Lead Wire	Available	-C (4-Pole)
₹ 14,329.25	1 Piece(s)	29 Day(s) or more	90	90	Three-Phase	200 ～ 220	Pinion shaft type	Lead Wire	Available	-S (4-Pole)
₹ 15,448.00	1 Piece(s)	6 Day(s) or more	90	90	Three-Phase	200 ～ 220	Pinion shaft type	Small terminal box included	Available	-S (4-Pole)

Basic Information

Type	Motor Unit	Motor Type	Induction	Environment	Standard
Electromagnetic Brakes, Clutches	No

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is an induction motor?: Answer: An induction motor is an AC motor widely used in various industries and applications. It operates on the principle of electromagnetic induction to produce rotational motion.
Question: What are the advantages of using induction motors?: Answer: Induction motors are known for their simplicity, durability, and low maintenance requirements. They are also cost-effective and capable of operating under a wide range of power factors.
Question: Can I use capacitors other than those provided with the AC motor?: Answer: As a rule, please use the capacitor that comes with the motor. However, in emergency situations, such as if the original capacitor is lost, you may use a non-polarized film capacitor intended for motors, with the same capacitance and rated voltage as the original. The capacitor included with the product is an essential component for ensuring the motor performs as specified. Using an incorrect capacitance can lead to reduced torque, rotational vibration, or overheating. Incorrect voltage ratings can cause capacitor damage, potentially leading to smoke or fire, so please be very careful.
Question: What is the overrun amount of an induction motor?: Answer: When operated under no-load conditions, the overrun amount at the motor's output shaft (as a reference value) is 30 to 40 rotations. The actual overrun amount can vary depending on the load torque due to friction and the load's moment of inertia. Additionally, if a gearhead is used, the overrun amount at the gear output shaft is calculated by dividing the overrun amount at the motor output shaft by the reduction ratio of the gearhead.
*Overrun refers to the extent of movement beyond the intended stop point after the motor's power is turned off during operation.
Question: What kind of Safety Standards is compliant to?: Answer: All World K Series models have a built-in overheat protection device and conform to major international safety standards. UL/CSA, CE Marking (Low Voltage Directive), models certified under CCC (China Compulsory Certification system) are also available.
Question: What is the operating ambient temperature?: Answer: It depends on the capacity as follows.
For 1 W and 3 W motors: -10 to +40 °C (must not freeze)
For 6 W to 90 W motors with single-phase 100 V, single-phase 200 V, and three-phase 200 V: -10 to +50 °C (must not freeze)
For other voltages: -10 to +40 °C (must not freeze)

Check other FAQ (3 items) Hide

Search by Category / Brand

Search by Category

How can we improve?