One-Touch Fitting（Fitting Type：Union, Unequal Dia.）

For General Piping, Tube Fitting, Reducer Union Straight

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin body. (applicable to some products)
· A wide lineup of products.
· Allows centralized piping.
· Collet features good action to prevent sore fingertips even with frequent attachment and detachment.
· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.
· The lock claws evenly grip the circumference of the tube.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.

CAD ：

2D / 3D

New Joint GWY□-0 Series

CKD

Flame retardant type with white body. Electroless nickel plating to the brass part

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducer Union Wye

PISCO

A quick connect fitting for general pneumatic piping.
[Features]
· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.
· The lock claws evenly grip the circumference of the tube.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· Allows centralized piping.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).

CAD ：

2D / 3D

Push One E Series, Union Connector

NITTA

[Features]
・ The tube is a push-one connection
・ No jigs or tools are required to connect the tubes
・ Electroless nickel plating treatment is applied
・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented
・ Uses flame-retardant resin (equivalent to UL94 standard V-0)
・ Uses flame-retardant PBT resin as material
・ Equivalent to UL94 V-0 and has excellent self-extinguishing property
・ It can be used even in an environment where spatter is scattered
・ Sealing on tapered male thread
・ No need to wrap sealing tape

CAD ：

2D

Touch Connector Five Reducer Union T

CHIYODA

A low-weight, one-touch fitting that utilizes a flame-retardant resin. A different diameter union Tee.

[Features]
· Good price-performance due to a comprehensive reduction of materials.
· Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve an ultimate cost performance.
· This fitting has been made lightweight due to a thorough reduction of materials.
· Further weight reduction has been achieved by making body parts entirely from resin.
· A new locking ring is utilized.
· The features of this joint streamline the task of piping and make the couplings more secure.
· Utilizing a new ring packing.
· The connecting force has been reduced while maintaining high airtightness.
· All items are marked by laser-marking process.
· All item models are written on the products.
· Flame-retardant body: A flame-retardant resin is utilized.
· Threaded section sealing (R thread): The threaded section has been seal processed—enabling pipes to be used directly.
· Flexible upper threaded section: The bodies of the elbow, branch tee can be rotated.
· * This is not a rotary type fitting.

CAD ：

2D

One-Touch Couplings - Stepped Diameter Union Straight【1-5 Pieces Per Package】

MISUMI

Economy Type suitable for being used in standard environments where strictness is not required for flow rate calculation.

CAD ：

2D / 3D

New Joint GWS□□-0 Series

CKD

White body flame retardant type. Electroless nickel plated brass

CAD ：

2D / 3D

Tube Fitting Branch Cross C for General Piping

PISCO

[Features]
· One-touch fitting for general pneumatic pipes.
· Rich lineup.
· The take-off angle of the resin body can be changed after mounting.
· Centralized piping is supported.
· Light gray and clean room packaged types are available as options.
· Clean room packaging specification uses fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducer Union Tee

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin body. (applicable to some products)
· A wide lineup of products.
· Allows centralized piping.
· Collet features good action to prevent sore fingertips even with frequent attachment and detachment.
· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.
· The lock claws evenly grip the circumference of the tube.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.

CAD ：

2D / 3D

Corrosion-Resistant SUS303 Equivalent Fitting Different Diameters Triple

PISCO

No copper-based metals are used. Also ideal for low-concentration ozone measures.

[Features]
· Perfect for use in a corrosive atmosphere if additional strength is required.
· The metal body uses special stainless steel with equivalent corrosion resistance to SUS303 (Cr19–21%, Mo1.5–2.5% stainless steel).
· No copper based metal is used.
· HNBR has been utilized in the rubber sealing material as part of efforts to reduce ozone concentrations.

CAD ：

2D / 3D

Touch Connector Five, Variable Diameter Union

CHIYODA

A low-weight quick-connect fitting that allows you to easily attach and detach the air tube.
[Features]
· Cost-effectiveness by thorough material reduction. Achieves thorough cost-effectiveness by eliminating unnecessary parts and forming with the smallest parts
· Weight reduction by thorough material reduction. Partial body made of resin to further reduce weight
· New-type lock ring employed. Realizes a joint function for smooth and reliable piping work
· New-type ring seal employed. Reducing connection operation force while maintaining high airtightness
・ All items are laser marked. The model number of all items is described on the product
・ Flame-retardant body. Flame-retardant resin standard adoption
· Thread section sealing (tapered male thread). Due to the thread section sealing, piping is possible as it is.
· Flexibility of the threaded top portion. The body of the elbow, branch tee, etc., and the thread section can be rotated (Not a rotary type. The all resin type does not rotate)
・ Two colors of white and black can be selected for the body resin part
[Applications]
・ Most suitable for industrial water piping, air piping in general (equipment piping, equipment piping, air tools, etc.)

CAD ：

2D

Touch Connector Five, Different Diameter Union Y

CHIYODA

Lightweight, one-touch fitting with a flame-retardant resin. Stepped diameter Union-Y.

[Features]
· Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
· Further weight reduction achieved by making body parts all resin.
· Utilizes a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
· Adoption of new ring packing.
· Reduces connection operability while maintaining high airtightness.
· All items are laser marked.
· All item model numbers are noted on product.

CAD ：

2D

Chemifit C1 Series, Union Connector EUC-C1

NITTA

[Features]
・ Completely oil-free processed product. Parts are washed and assembled in a cleanroom. No fats or oils are used in the sealing material
・ The tube is connected by a PushOne Fitting: No jigs nor tools are required for connecting the tube. No jigs or tools are required to connect the tubes
・ Non-metallic wetted parts. Since the fluid does not touch the metal, there is no elution of metal ions
・ No dust generation and has excellent non-polluting properties. Made of special polypropylene resin
・ Has excellent inner surface smoothness. Since it is an injection molded product, the inner surface is smooth.
・ Double clean packaging. Packed one by one in a cleanroom and then packed in a zipper seal bag
・ The body and adapter rotate. Elbows and tees can be oriented when piping
・ Compliant with Ministry of Health, Labour and Welfare of Japan Notification No. 201 (2006) and Ministry of Health, Labour and Welfare Notification No. 370 (1959)

CAD ：

2D

Quick-Connect Fitting Cross Union CNX

CHELIC

This product is a cross-union type quick-connect fitting. You can select the same diameter or a different type, and the tube diameter can be selected from ø4, 6, 8, 10, 12. A small jig cylinder made in Taiwan in 1988 by a specialized manufacturer of pneumatic equipment and parts. Sales have expanded world-wide and the company has gained a high reputation globally.

New Joint GW-FP1 Series for Food Manufacturing Process【10 Pieces Per Package】

CKD

It supports food manufacturing. Food grade (NSF H1) is used for the lubricant oil for the flow path and sliding parts to eliminate pollution concerns. Space-saving compact size quick-connect fitting for pneumatic piping.
[Features]
・ New joint series that has achieved a significant reduction in piping space.
・ V-shaped seal is used for the tube insertion seal to enable smooth insertion and secure sealing.
・ The elbow union type is rotatable, making piping work and piping removal work easy.
・ A flame-retardant white body that fits a comfortable working environment, and electroless nickel plating is used for the brass part.
・ The GW Series uses flame-retardant resin (equivalent to UL94 standard V-0) for the body and push ring.
[Applications]
・ As pneumatic pipe, tube fittings, single-action joints, air fittings, resin fittings, universal elbows.

CAD ：

2D / 3D

For Clean Environments, PP Type Tube Fitting, Union Straight Reducers

PISCO

PP resin is used for the main body, making it ideal for clean environments.

CAD ：

2D / 3D

Tube Fitting PP Type Different Diameters Union Tee for Clean Environments

PISCO

[Features]
· The main body uses PP resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types available as optional extras.
· PP or SUS304 can be selected for the screw part.
· No oil permitted.
· Plastic body is clear and transparent to allow liquid flow to be observed.
· Two packaging specifications available – normal packaging and clean room packaging – according to the specific application.

CAD ：

2D / 3D

Tube Fitting PP Type Different Diameters Union Y for Clean Environments

PISCO

[Features]
· The main body uses PP resin suitable for clean environments.
· EPDM is utilized in the seal.
· FKM and NBR types are available as optional extras.
· PP or SUS304 can be selected for the screw element.
· Use of oil permitted.
· Plastic body is clear colored to allow water flow to be observed.
· Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

CAD ：

2D / 3D

Tube Fitting Branch Cross B for General Piping

PISCO

Standard quick-connect fitting for general piping.
[Features]
·A wide lineup of products.
·After installation, you can change the take-off angle of the resin body.
·17 shapes have been updated, achieving weight reduction.
·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new. Unique elastic sleeve design shuts out air leaks.
·Enables centralized piping.
·A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required. By reducing the number of fittings used, you can reduce costs and space.
·A cleanroom packaging specification that is ideal for piping in a clean environment (optional). Fluorine-based grease is used as the grease, and after being washed with clean air, it is packaged in a cleanroom (equivalent to ISO class 6).
·With clean washing specifications ideal for various particle- and oil-averse production processes (optional). The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a cleanroom.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Reducing Triple

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin body. (applicable to some products)
· A wide lineup of products.
· Allows centralized piping.
· Collet features good action to prevent sore fingertips even with frequent attachment and detachment.
· The seal part uses an elastic sleeve with a unique shape that shuts out air leaks.
· The lock claws evenly grip the circumference of the tube.
· The electroless nickel provides high corrosion resistance, and the black resin body makes dirt hard to see.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducing Triple/Double

PISCO

Tube fitting for various types of piping with a rich lineup.
[Features]
·Water can be used depending on the conditions.
·High performance and high quality. The lock claws evenly grip the circumference of the tube. Even after many years, tubes still attach and detach like new.
·Unique elastic sleeve design shuts out air leaks.
·Industry-leading range of variations. A wide assortment of sizes of reducings is available. 1 fitting can be used where conventionally 2 fittings were required.
·By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.
[Applications]
·Used to connect tubes in 7 directions, straight and at right angle. The type for connection in 6 directions at right angle is smaller in size.
·This product has boss holes, which can be used to fix it to a wall surface or connect-and-fix it. Ideal for centralized distribution.

CAD ：

2D / 3D

For General Piping, Tube Fitting, Reducer Double Wye

PISCO

A complete line of quick connect fittings.
[Features]
· Quick-connect fitting for general pneumatic piping.
· After installation, you can change the take-off angle of the resin main body. (applicable to some products)
· Allows centralized piping.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
· The standard specifications enable the use of water and are ideal for temperature control of molds and dies.
· After installation, you can change the take-off angle of the resin body.

CAD ：

2D / 3D

for General Piping, Tube Fitting Mini-Type Cross C

PISCO

Volume successfully reduced by 40% from standard type.

CAD ：

2D / 3D

for General Piping, Tube Fitting Mini-Type Cross P

PISCO

Volume successfully reduced by 40% from standard type.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Reducing Union Straight

PISCO

A quick-connect fitting that is 40% more compact by volume compared to the standard type.
[Features]
· Ultra compact quick-connect fitting for general pneumatic piping.
· The oval collet makes it easy to disconnect the tube.
· The ø1.8 (diameter: 1.8 mm) type is the industry's first and smallest single-action type.
· Ideal for pipes in small actuators and similar equipment.
· Light gray specifications and cleanroom packaging specifications are also available as options.
· The cleanroom packaging specification uses fluorine-based grease.
· The product is washed with clean air and then packaged in a cleanroom (ISO class 6 equivalent).
[Applications]
· All piping methods are supported.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Reducing Union Tees

PISCO

[Features]
· Ultra-small one-touch fitting for general pneumatic pipes.
· Reduced size with a volume ratio of 40% over the standard type.
· Elliptical release ring allows easy tube release.
· The φ1.8 mm type is an industry-first minimum one-touch type.
· Optimum for piping of small actuators and such.
· Light gray types, and clean room packaged types currently available as options.
· Clean room packaging specifications define the use of fluorinated grease.
· After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room.

CAD ：

2D / 3D

For General Piping, Mini-Type Tube Fitting, Reducing Union Wye

PISCO

Volume successfully reduced by 40% versus the standard type.

CAD ：

2D / 3D

Corrosion-Proof SUS304 Fitting, Different Diameter Triples

PISCO

Best when used near chemicals if extra strength is required.

CAD ：

2D / 3D

for Corrosion Resistance, SUS304 Fitting, Different Diameters Union Straight

PISCO

Best when used near chemicals if extra strength is required.

CAD ：

2D / 3D

for Corrosion Resistance, SUS304 Fitting, Different Diameters, Union Tee

PISCO

Best when used near chemicals if extra strength is required.

CAD ：

2D / 3D

Corrosion-Resistance SUS 304 Fitting Union wipers of Different Diameters

PISCO

Best when used near chemicals if extra strength is required.

CAD ：

2D / 3D

Corrosion-Proof SUS304 Fitting Duplex wiper of Different Diameters

PISCO

Best when used near chemicals if extra strength is required.

CAD ：

2D / 3D

for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Different Diameters Union Straight

PISCO

No copper-based metal used. Also optimal for dealing with low-concentration ozone .

[Features]
· Perfect when additional strength is required for corrosive atmosphere applications.
· Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

CAD ：

2D / 3D

for Corrosion Resistance, Corrosion Resistant SUS303 Equivalent Fitting, Different Diameters Union Tee

PISCO

No copper-based metal used. Also optimal for dealing with low-concentration ozone .

[Features]
· Perfect when additional strength is required for corrosive atmosphere applications.
· Metal body uses special stainless steel for which corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material in order to cope with low-concentration ozone.

CAD ：

2D / 3D

Corrosion-Resistant SUS303 Equivalent Fitting Different Diameters Union Y

PISCO

No copper-based metal used. Also optimal for low-concentration ozone measures.

[Features]
· Perfect when additional strength is required and used in a corrosive atmosphere.
· Metal body uses special stainless steel with corrosion resistance equivalent to SUS303 (Cr19 – 21%, Mo1.5 – 2.5% stainless).
· Copper-based metal is not used.
· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

CAD ：

2D / 3D

Corrosion-Resistant SUS303 Equivalent Fitting Different Diameters Double Y

PISCO

No copper-based metal used. Also optimal for low-concentration ozone measures.

[Features]
· Perfect when additional strength is required and when used in a corrosive atmosphere.
· Metal body uses special stainless steel whose corrosion resistance is SUS303 equivalent (Cr19 - 21%, Mo1.5 - 2.5% stainless).
· Copper based metal is not used.
· HNBR has been utilized in the sealing rubber material as part of efforts to reduce ozone concentrations.

CAD ：

2D / 3D

Touch Connector FUJI Different Diameter Union

CHIYODA

[Features]
· One-touch fitting with rotation lock ring that prevents full rotation of tube.
· Reducer union with plastic body.

CAD ：

2D

Junron One-Touch Fitting M Series (for General Piping) Reducing Union Tee

JUNKOSHA

[Features]
· Electroless nickel plating is applied as standard to metal parts.
· All brass parts in the M series nipples and plastic bodies have nickel plating applied as standard.
· Comes with a color seal for screw identification.
· Each of the different types of R (PT) screw are coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removal direction of the tube.
・R (PT) screw parts in elbows and Tees, and the resin mating parts rotate, allowing for free positioning according to the removal direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is still fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting, stopping the tube from turning.

Junron One-Touch Fitting M Series (for General Piping) Reducing Union

JUNKOSHA

[Features]
· Electroless nickel plating is as standard applied to metal parts.
· The nickel plating in all brass parts of M series nipples and plastic bodies is standardized.
· Color seal for seal identification.
· Each of the different types of R (PT) screws is coated with a different colored seal so they can be identified at a glance (PAT.NO.1820889).
· You can position the body in accordance with the removing direction of the tube.
・R (PT) screw parts of elbow/Tee and the resin joint part rotate allowing for free positioning according to the retrieval direction of the tube after the fitting has been mounted. Moreover, the screw can be tightened while the resin part is fixed.
▪ The tube grip comes with a rotating mechanism.
▪ The tube grip rotates smoothly in the fitting thus preventing the turning of the tube.

Push One A Series Union Connector

NITTA

No jigs or tools are required for connecting tubes to this union connector. The surface is resistant to degradation, preventing elution of copper ions.

CAD ：

2D

PushOne A Series, Y Union

NITTA

No jigs or tools are required for connecting tubes to this Y union. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

[Features]
· The tube is connected by Push One®.
· No need for jigs or tools to connect the tube.
· Electroless nickel plating.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· The white body contributes to workplace environment aesthetics.
· Noncombustible PBT resin is used for the base material.
· Compliant with the UL94 V-0 standard and has superior self-extinguishing properties.
· Can be used in environments where sputtering is an issue.
· R screws are sealed, and thus there is no need to wrap them with sealing tape

CAD ：

2D

PushOne A Series, Double Y Union

NITTA

No jigs or tools are required for connecting tubes to this double Y-union unit. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

[Features]
· The tube is connected by Push One®.
· No need for jigs nor tools to connect the tube.
· Electroless nickel plated.
· There is little deterioration of the surface and elution of copper ions into the fluid is prevented.
· The white body brightens the working environment.
· Noncombustible PBT resin is used for the materials.
·Has superior self-extinguishing properties equivalent to UL94 V-0 standard.
· Suitable for use in an environment where sputtering occurs.
· The R screws are sealed, and so rapping with sealing tape is not required.

CAD ：

2D

Push One A Series Union Tee

NITTA

No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.

CAD ：

2D

Push One E Series, Y Union

NITTA

[Features]
・ The tube is a push-one connection
・ No jigs or tools are required to connect the tubes
・ Electroless nickel plating treatment is applied
・ There is little deterioration of the surface and elution of copper ions into the fluid is prevented
・ Uses flame-retardant resin (equivalent to UL94 standard V-0)
・ Uses flame-retardant PBT resin as material
・ Equivalent to UL94 V-0 and has excellent self-extinguishing property
・ It can be used even in an environment where spatter is scattered
・ Sealing on tapered male thread
・ No need to wrap sealing tape

CAD ：

2D

PushOne E Series Double Y Union【5 Pieces Per Package】

NITTA

No jigs or tools are required for connecting tubes to this double Y-union unit. The surface is resistant to degradation, preventing elution of copper ions.

CAD ：

2D