Conveyer Rollers（Roller Material：Plastic）

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Rollers-Plastic

  MISUMI

  This is a resin type conveyor roller. The material of the roller is polyacetal.
  You can specify the total length in 1mm increments up to a maximum of 513mm.
  Please use MISUMI's conveyor roller shaft and snap pin for the installation shaft.

  CAD ：

  2D / 3D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	20 ～ 50	Plastic	Shaft	Double	-	-	Not Provided	-	-	-	Not Provided	-	-	-	-	-

  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF7

  FUJI SEISAKUSHO

  [Features]
  - Multipurpose roller with superior shock resistance and quiet performance.
  - Housing employs polycarbonate, which confers excellent shock resistance.
  - Multipurpose roller which can be used in a wide variety of different fields.
  - Both press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available for the bearing element.
  - Additionally, either hardened polyvinyl chloride (PVC) or steel (ST) can be used for the tube material, depending on the application.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 700	-	Not Provided	Standard / Low Noise	-	-	-	-	-	-	Steel	-

  From: ₹ 1,829.78
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Light Loads) SERIES FF1

  FUJI SEISAKUSHO

  [Features]
  Achieves smooth rotation along with miniaturization / weight reduction and low noise, while also featuring shock resistance in addition to chemical resistance, corrosion resistance and elasticity.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	18 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 600	-	Not Provided	Standard / Chemical Resistance	-	-	-	-	-	-	Steel / Stainless Steel	-

  From: ₹ 787.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)

  OKURA

  ⌀50 resin roller for light loads. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  From: ₹ 2,249.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500

  MAKITECH

  A general purpose ⌀ 38-mm resin roller. Suitable for transporting light loads. A single roller unit for the JR-3823 roller conveyor. The widths of the roller can be specified in 1-mm increments from 100–500 mm.
  
  [Features]
  · The roller diameter is ⌀ 38 mm. The minimum roller interval is P50.
  · The standard roller width (nominal) is 100–500 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes. Utilizes an aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	38	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600

  MAKITECH

  φ57 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5730 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.
  
  [Features]
  · The roller diameter is φ57.0. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 600W in 50mm increments.
  · Can be manufactured to desired size.
  · Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	57	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)

  OKURA

  ⌀50 resin roller for light loads. Stainless steel shaft type. Transport distance and roller width can be specified within the range of 90 - 620 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50	Plastic	No Shaft (Round Hole) / Shaft	Double	90 ～ 620	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  From: ₹ 2,249.60
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Conveyor Roller (for Medium/Heavy　Load) SERIES FF3

  FUJI SEISAKUSHO

  Highly functional multi-purpose plastic conveyor rollers with improved dustproof and waterproof performance, as well as excellent impact resistance and sound deadening properties.
  [Features]
  ·For medium and heavy loads. A double labyrinth seal is used for the seal part.
  ·Press bearings (steel, stainless steel) and precision bearings (6002ZZ) are available.
  ·In addition, the tube material can be selected from hard polyvinyl chloride (PVC) and steel (ST), which have excellent impact resistance, depending on the application.
  ·The diameter can be selected from ⌀50, 51, 57, and 61 mm (diameters of 50, 51, 57, and 61 mm) according to the application.
  [Applications]
  ·Ideal for small packages, bottles, cans, foods, newspapers, magazines, textiles, lightweight cartons, and other lightweight items.
  ·Because it contains bearings, it can rotate more smoothly.
  ·Because it uses a double labyrinth seal, it is durable even in dusty and watery environments.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50 ～ 57	Plastic	No Shaft (Round Hole)	Double	100 ～ 700	-	Not Provided	Standard / Water Resistance	-	-	-	-	-	-	Steel	-

  From: ₹ 2,519.58
  Days to Ship: 13 Day(s) or more

  13 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)

  OKURA

  [Features]
  · Light load conveyor incorporating ø30 resin roller in stainless steel frame. Conveyor length and roller width within the range of 90 to 390 mm can be specified.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	30	Plastic	No Shaft (Round Hole) / Shaft	Double	150 ～ 390	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  From: ₹ 1,709.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)

  OKURA

  [Features]
  • ⌀40 resin rollers for loads.
  • Stainless steel shaft type.
  • Transport distance and roller width can be specified within the range of 90 - 490 mm.

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	40	Plastic	Shaft	Double	305 ～ 490	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  From: ₹ 2,395.20
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller, M Series (JR-1230), Diameter φ12 × Width 50 - 200

  MAKITECH

  Superfine φ12 Resin Roller. Roller unit parts for JR-1230 roller conveyor, suitable for small item transport.
  
  [Features]
  · The roller diameter is φ12. The minimum roller interval is P15.
  · The standard of the roller width (nominal) is 50W to 200W at intervals of 50mm.
  · By adopting a block methodology and incorporating a stainless steel ball into the intermediate element (joint) for 100W or above rollers, roller pipe and shaft deflection are decreased, achieving smooth rotation.
  · Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	12	Plastic	-	Double	-	-	Not Provided	-	-	-	Not Provided	-	-	-	Stainless Steel	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490

  MAKITECH

  [Features]
  - φ42 resin roller.
  - Individual roller for lightweight SJR-4023S roller conveyor with aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	40	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400

  MAKITECH

  Highly popular φ20 resin roller. Suited for transport of lightweight, small items. The roller component is the lightweight JR-2015B roller conveyor. The widths can be specified in 1 mm increments from 100 to 400 mm.
  
  [Features]
  · The roller diameter is φ20.2. The minimum roller interval is P25.
  · The standard of the roller width (nominal) is 100W to 400W at intervals of 50mm. Free size is available.
  · Uses an aluminum frame. [30 Low-Floor Type Frame]

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	20.2	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500

  MAKITECH

  φ 30 resin roller. Suited for transport of small, lightweight items. The roller component from the lightweight JR-3018B roller conveyor. The widths can be specified in 1 mm increments from 100 to 500 mm.
  
  [Features]
  · The roller diameter is 30.5 mm. The minimum roller interval is P40.
  · The standard roller width (nominal) is 100 to 500 mm at intervals of 50 mm.
  · Configurable size is available.
  · Aluminum extrusion.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	30.5	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600

  MAKITECH

  A ⌀ 40-mm resin roller. Suitable for transporting lightweight small items. A single roller unit for the lightweight JR-4023 roller conveyor. The width of the roller can be specified in 1-mm increments from 100–600 mm.
  
  [Features]
  · The diameter of the roller is ⌀ 40.0 mm. The minimum roller interval is P50.
  · The standard roller width (nominal) is 100–600 mm in increments of 50 mm.
  · This roller can also be manufactured in non-standard sizes.
  · Utilizes an aluminum frame.

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	40	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600

  MAKITECH

  φ50 resin roller. Suited for transport of lightweight, small items. The roller component from the lightweight JR-5028 roller conveyor. The widths can be specified in 1 mm increments from 100 to 600 mm.
  
  [Features]
  · The roller diameter is φ50.3. The minimum roller interval is P75.
  · Standard roller width (nominal) is 100W to 600W in 50mm increments.
  · Can be manufactured to desired size.
  · Aluminum extrusion

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50.3	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), S Series (SJR-3018), Diameter φ30.6 × Width 90 - 390

  MAKITECH

  φ30 resin roller. Suited for transporting lightweight, small items with steel frame. Roller unit of the SJR-3018 roller conveyor.
  
  [Features]
  · The roller diameter is φ30.6. The minimum roller interval is P50.
  · Standard roller width (nominal) is is 90W to 390W.
  - Custom sizes are not available.
  · Resin molded SUS ball bearing.
  · Model 60 frame

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	30.5	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Resin Roller (Roller for Conveyor), S Series (SJR-5028), Diameter φ50.3 × Width 90 - 620

  MAKITECH

  φ50 resin roller. The frame is made of steel. Roller unit of the SJR-5028 roller conveyor.
  
  [Features]
  · The roller diameter is φ50.0. The minimum roller interval is P75.
  · Standard roller width (nominal) is 90W to 630W in 50mm increments.
  · Can be manufactured to desired size.
  · A resin molded SUS ball bearing.
  · Model 90 frames

  CAD ：

  2D

  Long Roller Type	Type	Outer Dia. D(Ø)	Roller Material	Shaft Type	Bearing	Width W(mm)	Drive	Surface Treatment	Properties	Power Supply	Short Roller Type	Lining	Lining Material	Lining Hardness(Shore A)	Lining Color	Bearing Material	Cleaning Method
  Straight	Long Roller	50	Plastic	-	Double	-	-	Not Provided	Water Resistance	-	-	Not Provided	-	-	-	Plastic	-

  Days to Ship: 10 Day(s) or more

  10 Day(s) or more

Brand
Product Series
CAD
From
Days to Ship
Long Roller Type
Type
Outer Dia. D(Ø)
Roller Material
Shaft Type
Bearing
Width W(mm)
Drive
Surface Treatment
Properties
Power Supply
Short Roller Type
Lining
Lining Material
Lining Hardness(Shore A)
Lining Color
Bearing Material
Cleaning Method

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	FUJI SEISAKUSHO	FUJI SEISAKUSHO	OKURA	MAKITECH	MAKITECH	OKURA	FUJI SEISAKUSHO	OKURA	OKURA	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH	MAKITECH
Product Series	Conveyor Rollers-Plastic	Conveyor Roller (for Medium/Heavy　Load) SERIES FF7	Conveyor Roller (for Light Loads) SERIES FF1	Single Unit Plastic Roller (Roller for Conveyor), Diameter ⌀50 × Width 90 - 620 (BBR Type)	Resin Roller, M Series (JR-3823), Diameter φ38 × Width 100 - 500	Resin Roller (Roller for Conveyor), M Series (JR-5730), Diameter φ 57.0 × Width 100 - 600	Single Unit Plastic Roller (Conveyor Roller), Diameter ⌀50 (Stainless Steel Shaft) × Width 90 - 620 (BLS Type)	Conveyor Roller (for Medium/Heavy　Load) SERIES FF3	Resin Roller Conveyor, Diameter ø30 (Stainless Steel Shaft) × Width 90-390 (BFS Type)	Individual Plastic Roller (Conveyor Roller), Diameter ⌀40 (Stainless Steel Shaft) × Width 90 - 490 (BPS Type)	Plastic Roller, M Series (JR-1230), Diameter φ12 × Width 50 - 200	Plastic Roller, S Series (SJR-4023S), Diameter φ40 × Width 240 - 490	Plastic Roller (Conveyor Roller), M Series (JR-2015B), Diameter φ 20.0 × Width 100 - 400	Plastic Roller (Conveyor Roller), M Series (JR-3018B), Diameter φ 30.6 × Width 100 - 500	Resin Roller (Roller for Conveyor), M Series (JR-4023), Diameter φ 40.0 × Width 100 - 600	Resin Roller (Roller for Conveyor), M Series (JR-5028), Diameter φ 50.3 × Width 100 - 600	Resin Roller (Roller for Conveyor), S Series (SJR-3018), Diameter φ30.6 × Width 90 - 390	Resin Roller (Roller for Conveyor), S Series (SJR-5028), Diameter φ50.3 × Width 90 - 620
CAD	2D / 3D				2D	2D					2D	2D	2D	2D	2D	2D	2D	2D
From		₹ 1,829.78	₹ 787.00	₹ 2,249.60			₹ 2,249.60	₹ 2,519.58	₹ 1,709.60	₹ 2,395.20
Days to Ship	8 Day(s) or more	13 Day(s) or more	5 Day(s) or more	8 Day(s) or more	10 Day(s) or more	9 Day(s) or more	6 Day(s) or more	13 Day(s) or more	8 Day(s) or more	8 Day(s) or more	9 Day(s) or more	10 Day(s) or more	9 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more	10 Day(s) or more
Long Roller Type	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight	Straight
Type	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller	Long Roller
Outer Dia. D(Ø)	20 ～ 50	50 ～ 57	18 ～ 57	50	38	57	50	50 ～ 57	30	40	12	40	20.2	30.5	40	50.3	30.5	50
Roller Material	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic
Shaft Type	Shaft	No Shaft (Round Hole)	No Shaft (Round Hole)	No Shaft (Round Hole) / Shaft	-	-	No Shaft (Round Hole) / Shaft	No Shaft (Round Hole)	No Shaft (Round Hole) / Shaft	Shaft	-	-	-	-	-	-	-	-
Bearing	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double	Double
Width W(mm)	-	100 ～ 700	100 ～ 600	90 ～ 620	-	-	90 ～ 620	100 ～ 700	150 ～ 390	305 ～ 490	-	-	-	-	-	-	-	-
Drive	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Properties	-	Standard / Low Noise	Standard / Chemical Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Standard / Water Resistance	Water Resistance	Water Resistance	-	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance	Water Resistance
Power Supply	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Short Roller Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining	Not Provided	-	-	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Lining Material	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Hardness(Shore A)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Lining Color	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Bearing Material	-	Steel	Steel / Stainless Steel	Plastic	Plastic	Plastic	Plastic	Steel	Plastic	Plastic	Stainless Steel	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic	Plastic
Cleaning Method	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...