Standard Linear Guides（Set / Single Item：Set）

Miniature Linear Guides - Standard Blocks, Light Preload / Slight Clearance

MISUMI

Miniature Linear Guides - Standard Blocks, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 25 and 700
● Assembly Height (mm.): 6, 8, 10, 13, 16 and 20
● Accuracy Standards : Standard Grade, High Grade and Precision Grade
● Block Type : Standard Block
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Full-Ball Type LM Guide, International Standard, HSR Type

THK

An international-standard sized LM guide that can be used from all positions.
[Features]
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block,
allowing it to be used from any position and in a broad range of applications.
· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
· The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set)
makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
· The LM block, LM rail and balls are all available in stainless steel.
· The balls are retained by the retaining plate without falling even when the LM rails are removed. (Excludes the HSR8, 10 and 12).

CAD ：

2D / 3D

[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type

THK

Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

CAD ：

2D / 3D

Miniature Linear Guides - Short Blocks, Light Preload / Slight Clearance

MISUMI

Miniature Linear Guides - Short Blocks, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 35 and 590
● Assembly Height (mm.): 8, 10, 13 and 16
● Accuracy Standards: Standard Grade and High Grade
● Material: Carbon Steel 56 HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Miniature Linear Guides - Wide Rails - Standard Blocks, Light Preload / Slight Clearance

MISUMI

Miniature Linear Guides - Wide Rails - Standard Blocks, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 50 and 670
● Assembly Height (mm.): 6.5, 9, 12, 14, and 16
● Accuracy Standards : Standard Grade, High Grade and Precision Grade
● Rail Type : Wide Rail
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Miniature Linear Guides - Wide Standard Blocks, Light Preload / Slight Clearance

MISUMI

Miniature Linear Guides - Wide Standard Blocks, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
● Rail Length Minimum/Maximum (mm.): 35 and 630
● Assembly Height (mm.): 8, 10, 13, 16 and 20
● Accuracy Standards: Standard Grade and High Grade
● Material: Carbon Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Heavy Load - Normal Clearance

MISUMI

Linear Guides for Heavy Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28 and 33
● Accuracy Standards: Standard Grade and High Grade
● Material: Carbon Steel 58 HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Caged Ball LM Guide, Miniature, SRS Type

THK

A miniature type with a compact structure. Can be mounted in areas where space is at a premium. Part of the LM block is made of resin for a lighter overall weight.
[Features]
· The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
· The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
· The LM block and LM rail are both made with highly rust-preventive stainless steel.
· The rail cross-section height is kept low, and it has a compact structure with a single ball row on the right and left, allowing it to be mounted in areas where space is at a premium.
· A lightweight and low-inertia type where part of the LM block (around the ball escape hole, etc.) has been molded with resin using insert molding.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

CAD ：

2D / 3D

Linear Guides for Medium Load - Normal Clearance

MISUMI

Linear Guides for Medium Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28 and 33
● Accuracy Standards: Standard Grade and High Grade
● Material: Carbon Steel 58 HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for for Heavy Load - Normal Clearance

MISUMI

Linear Guides for Heavy Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33, and 42
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type

THK

Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

CAD ：

2D / 3D

Linear Way L LWL (F) Series

IKO

This simple structure which has two rows and four contact points and the unique sizing technology is what led to the creation of this ultra small sized linear guiding device.

[Features]
· If you are looking for a simple structure, then try this ultra small size (smallest sized LWL1 has a truck rail of just 1 mm)
· Wide variation that responds to needs
· A ball retaining type that is easy to assemble
· Made from a stainless steel that is highly corrosion-resistant
· Compatible with a wide variety of application in special environments

CAD ：

2D

Miniature Linear Guides - Standard Blocks with Dowel Holes, Light Preload / Slight Clearance

MISUMI

Miniature Linear Guides - Standard Blocks with Dowel Holes, Light Preload / Slight Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 35 and 630
● Assembly Height (mm.): 8, 10, 13 and 16
● Accuracy Standards: Standard Grade and High Grade
● Block Type: Standard Block with Dowel Holes
● Material: Carbon Steel 56 HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload

MISUMI

Linear Guides for Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 220 and 1960
● Assembly Height (mm.): 30,36, and 42
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

• Volume Discount

CAD ：

2D / 3D

Linear Guides for Medium/Heavy Load - Stainless Steel - Normal Clearance

MISUMI

Linear Guides for Medium/Heavy Load - Stainless Steel - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 700
● Assembly Height (mm.): 24, 28, and 33
● Block Type : Standard Block or Wide Block
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Rail System SBI-FL/FLL Series

SBC

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.

CAD ：

2D / 3D

Miniature Full-Ball Type LM Guide SRS-G Type

THK

Lightweight and compact structure.
[Features]
· The LM block is designed to ensure rigidity within a limited space.
· Combining with large diameter balls can provide rigidity in each direction.
· Capable of receiving loads in all directions, and a single-rail guide can adequately operate under a small moment load.
· Despite its compact-size, it is a finite stroke type of cross roller guide and ball slide.
· A highly reliable and compact linear motion system with no problematic cage misalignment.
· LM block, LM rail, and ball are all compatible with stainless steel.

CAD ：

2D / 3D

Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload

MISUMI

Linear Guides for Extra Super Heavy Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 220 and 1960
● Assembly Height (mm.): 30, 36, and 42
● Block Type : Standard Block or Wide Block with Tapped Holes
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

• Volume Discount

CAD ：

2D / 3D

Miniature Linear Guides - Long Blocks, Light Preload

MISUMI

Miniature Linear Guides - Long Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 700
● Assembly Height (mm.): 6, 8, 10, 13, 16 and 20
● Accuracy Standards : Standard Grade, High Grade and Precision Grade
● Block Type : Long Block
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Caged Ball LM Guide, International Standard, SHS Type

THK

Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
· The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
· The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· Developed by THK, a pioneer of linear motion systems, it features a dimensional design that conforms to the full-ball type LM guide HSR type, the de-facto global standard.
· The cross-section of the LM rail has been made more compact, lowering the center of gravity and further increasing rigidity.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machinery

CAD ：

2D / 3D

Linear Rail System SBI-SL/SLL Series

SBC

[Features]
· The 4-row, circular arc groove, 2-contact point structural design makes this an international standard series that has a rated load in four directions.
· Integrates the return piece, plate part, and tube, and circulates the balls in a single-file manner.
· Stainless steel holding plates have been assembled on the top and bottom parts of the block to prevent the ball from falling out even if the rail is removed.

* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shaft quantity: 2(-II)⇒ Order quantity: "2, 4, 6..."
Please place your orders in this manner.

CAD ：

2D / 3D

Miniature Linear Guides - Long Blocks with Dowel Holes, Light Preload

MISUMI

Miniature Linear Guides - Long Blocks with Dowel Holes, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 40 and 630
● Assembly Height (mm.): 8, 10, 13, 16 and 20
● Block Type : Long Block with Dowel Holes
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload

MISUMI

Linear Guides for Medium Load - With Plastic Retainers, Interchangeable, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33, and 42
● Rail Type : Standard Rail
● Option: Set (Rail + Block) / Block only or Rail only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

• Volume Discount

CAD ：

2D / 3D

Miniature Linear Guides - Wide Rails - Long Blocks, Light Preload

MISUMI

Miniature Linear Guides - Wide Rails - Long Blocks, Light Preload
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 80 and 670
● Assembly Height (mm.): 9, 12, 14, and 16
● Accuracy Standards : Standard Grade, High Grade and Precision Grade
● Block Type : Long Block
● Rail Type : Wide Rail
● Material: Stainless Steel 56HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for for Medium Load - Normal Clearance

MISUMI

Linear Guides for Medium Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 33, and 42
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

Linear Guides for Super Heavy Load - Normal Clearance

MISUMI

Linear Guides for Super Heavy Load - Normal Clearance
These linear guides or linear slides are factory automation components. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 100 and 1960
● Assembly Height (mm.): 24, 28, 30, 36, 40, 42 and 45
● Block Type : Standard Block and Wide Block Tapped Hole
● Material: Carbon Steel 56HRC-62HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

CAD ：

2D / 3D

H Type Economy Guide (EGH, EGH-L)

OZAK

[Features]
・ A side seal is provided as standard to enhance dust-proofness. Longer lifespan can be expected because foreign objects are further prevented from entering
・ The weight of the rail has been reduced by reviewing the height and cross-sectional shape
・ The lubrication performance has been improved compared to conventional products by reviewing the grease supply path and installing a grease reservoir in the ball circulation path
・ Since the bearing and rail have complete compatibility, there is no need to put a matching mark between the bearing, rail, etc., and assembly time can be shortened
・ The ball built into the bearing has a structure that does not fall out, so there is no risk of the ball falling out, but when assembling the bearing into the rail, insert it slowly in parallel
・ The rail length is standardized so that it can be used for all rail lengths and that the mounting hole pitch positions are symmetrical
・ The bearing is shipped with lithium soap-based grease sealed, but the manufacturer recommends that you regularly replenish the grease because there are lubrication holes on both sides

CAD ：

2D