(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
- Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
- Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.
THK Standard Linear Guides（Material：Carbon Steel）
Brand |
|
|---|---|
| CAD |
|
| Days to Ship |
|
15 items
- Sort By
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type
THK
An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 N/A 26 ～ 82 26 ～ 72 4 ～ 10 60 ～ 80 4.5 ～ 9 From: ₹ 6,870.16 Days to Ship: 5 Day(s) or more 
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type
THK
An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-sectionRail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 Available 26 ～ 72 26 ～ 72 4 ～ 8.5 60 ～ 80 4.5 ～ 9 From: ₹ 6,832.66 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide, International Standard, HSR Type
THK
An international-standard sized LM guide that can be used from all positions.
[Features]
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block,
allowing it to be used from any position and in a broad range of applications.
· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
· The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set)
makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
· The LM block, LM rail and balls are all available in stainless steel.
· The balls are retained by the retaining plate without falling even when the LM rails are removed. (Excludes the HSR8, 10 and 12).Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 87 ～ 3000 Standard / Wide 20 ～ 63 30 ～ 90 20 ～ 65 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 32 ～ 142 36 ～ 120 5 ～ 16 60 ～ 150 6 ～ 18 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
[Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type
THK
Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· The well-balanced 4-raceway configuration ensures a sufficient preload is applied, allowing you to increase rigidity in 4 directions with ease.
· With no differential slipping of the balls in relation to any preload or eccentric loads, ensuring smooth operation. Also, its excellent abrasion-resistance ensures accuracy over a long period.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machineryRail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 73 ～ 2920 Standard / Wide 15 ～ 34 28 ～ 55 15 ～ 35 Standard Set Standard Standard Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 N/A 26 ～ 82 26 ～ 72 4 ～ 10 60 ～ 80 4.5 ～ 9 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type
THK
Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machineryRail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 73 ～ 2920 Standard / Wide 15 ～ 34 24 ～ 55 15 ～ 35 Standard Set Standard Standard Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 Available 26 ～ 72 26 ～ 72 4 ～ 8.5 60 ～ 80 4.5 ～ 9 Days to Ship: 7 Day(s) or more
7 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type
THK
An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 Available 26 ～ 60 26 ～ 50 4 ～ 8 60 ～ 80 4.5 ～ 9 From: ₹ 7,870.69 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type
THK
An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.
[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Standard / Wide - - 15 ～ 35 Standard Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 N/A 26 ～ 82 26 ～ 50 4 ～ 9 60 ～ 80 3.5 ～ 9 From: ₹ 7,404.50 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
THK
[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model
These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Block Type : Wide Block
● Applicable for Rail Type : Wide Rail
● Accuracy Grade : Standard Grade
● Number of Block Mounting Holes : 4 or 6
● Mounting Hole Dimension : M5, M6 and M8
● Material: Carbon Steel and Stainless Steel
[Application]
It is used in a THK LM Guide HRW Series.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Wide - - 17 ～ 35 Wide Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 N/A 31 ～ 107 19 ～ 60 3.3 ～ 8 40 ～ 80 4.5 ～ 7 From: ₹ 15,143.08 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide, International Standard, SHS Type
THK
Each of the ball rows are arranged at a contact point of 45°, allowing the guide to be used with any posture
[Features]
· The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
· The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
· The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· Developed by THK, a pioneer of linear motion systems, it features a dimensional design that conforms to the full-ball type LM guide HSR type, the de-facto global standard.
· The cross-section of the LM rail has been made more compact, lowering the center of gravity and further increasing rigidity.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machineryRail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 71 ～ 3000 Standard / Wide 15 ～ 28 24 ～ 42 15 ～ 30 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 26 ～ 72 26 ～ 52 4 ～ 8.5 60 ～ 80 4.5 ～ 9 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide, Radial Type, SSR Type
THK
Compact design with low cross-sectional height and ideal for horizontal guides.
[Features]
· The adoption of the ball retainer has eliminated mutual friction between the balls, providing excellent high speed characteristics, low noise, good sound quality and a long lifespan, and keeps it maintenance-free for an extended period.
· The ball retainer eliminates mutual friction between the balls, improving how well the grease is maintained and reducing the amount of dust raised.
· A compact design with low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· Features a ball-contacting type structure that demonstrates strong performance in the radial direction. This means there is little displacement in the radial direction when a radial load is applied, providing stable running accuracy.
· The self-aligning capability achieved from THK's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· Also standardized the stainless steel made model using highly-corrosion resistant stainless steel in the LM block, LM rail and balls.
[Applications]
· Surface grinders,electric discharge machining, high-speed conveyors, NC lathes, injection molding machines
· Woodworking machines, semiconductor manufacturing devices, inspection devices, food processing machineryRail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 47 ～ 3000 Standard 15 ～ 20 24 ～ 28 15 ～ 20 Standard Set Standard / Light Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 26 ～ 32 26 4 ～ 5 60 4.5 ～ 6 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide, Radial Type, SR Model
THK
Compact design with low cross-sectional height and ideal for horizontal guides.
[Features]
· Compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· Self-aligning type that can easily absorb error in the level accuracy and the degree of parallelism for the 2 shafts, which is capable of highly accurate and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because the balls are designed for smooth circulation using the guiding part on the end plate.
· Accuracy is possible to be maintained for long periods of time, has excellent abrasion-resistance and limited differential slipping even when there is a preload or uneven load.
· LM block, LM rail, and ball are all compatible with stainless steel.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 73 ～ 3000 Wide Short 23 33 25 Standard Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 60 - 7 60 7 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Full-Ball Type LM Guide Wide Rail HRW Type
THK
A structure with a wide rail and low center of gravity. It is thinner than HSR and is advantageous when Mc moment stiffness is required.
[Features]
· LM rails and LM blocks feature 4 precision-ground raceways that the balls travel along. The end plates embedded in the LM block circulate the rows of balls.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need of reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability: The self-adjusting power effect of the front-facing combination (DF set) of unique circular arc groove allows to absorb mounting errors even if preload is applied, resulting in highly accurate, smooth linear motion.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 86 ～ 3000 Wide 42 27 27 Wide Set Standard / Light Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 N/A 46 32 6 60 4.5 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
Caged Ball LM Guide Low Floor Wide Rail SHW Type
THK
A structure with a wide rail and low center of gravity. Thinner than the SHS type, which is advantageous when Mc moment rigidity is required.
[Features]
· A highly rigid LM guide with superior high speed performance and that is maintenance-free over long periods of time. Also generates little noise thanks to the adoption of a ball retainer.
· The SHW, which has a structure with a wide LM rail and a low center of gravity, is ideal for use in locations where there are space limitations or when there are MC moment rigidity requirements.
· Each of the ball raceways have been positioned at a 45° contact angle so that the rated load will be the same in all 4 directions (radial direction, reverse radial direction, horizontal directions) that act on the LM block, allowing it to be used from any position and in a broad range of applications.
· The self-aligning capability achieved from the manufacturer's proprietary circular arched-groove front face assembly (DF set) makes it possible to absorb any mounting error, even when there is a preload. It also delivers a smooth linear motion at high accuracies.
· The ball retainers eliminate friction generated by the balls rubbing against each other, while the lubricant oil (agent) is maintained, providing superior low-dust performance.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 108 ～ 3000 Wide 69 35 35 Wide Set Standard / Light Preload / Medium Preload Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade Carbon Steel 4-Row, Circular 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 Available 107 60 8 80 7 Days to Ship: 14 Day(s) or more
14 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
THK
[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type
These slide blocks are applicable for THK brand linear guides. They offer a wide variety of sizes to choose from.
[Feature]
● Block Type : Wide Block
● Applicable for Rail Type : Wide Rail
● Accuracy Grade : Standard Grade
● Number of Block Mounting Holes : 4 or 6
● Mounting Hole Dimension : M4, M5, M6 and M8
● Material: Carbon Steel
[Application]
It is used in a THK LM Guide SHW Series.Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter - Wide - - 21 ～ 35 Wide Block Only Standard Standard Grade Carbon Steel 4-Row, Circular 1 Available 31 ～ 107 19 ～ 60 4.4 ～ 8 50 ～ 80 4.5 ～ 7 From: ₹ 15,669.77 Days to Ship: 5 Day(s) or more
5 Day(s) or more
-
You can add up to 6 items per a category to the compare list.
![[Rail only]Ball retainer with LM Guide Wide rail SHW form](//in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_b$)
[Rail only]Ball retainer with LM Guide Wide rail SHW form
THK
We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.
Rail Length L(mm) Block Type Rail Width(mm) Mounting Height H(mm) Nominal Part Number Rail Type Set / Single Item Preload Accuracy Material Ball Arrangement No. of Blocks Retainer Block Mounting Hole Pitch (Width Direction)(mm) Block Mounting Hole Pitch (Length Direction)(mm) Block Mounting Hole Diameter Rail Mounting Hole Pitch(mm) Rail Mounting Hole Diameter 60 ～ 2920 - 37 ～ 42 21 ～ 27 21 ～ 27 Wide Rail Only Standard Standard Grade Carbon Steel - - - - - - 50 ～ 60 4.5 Days to Ship: 7 Day(s) or more
7 Day(s) or more
![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_b$)
![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_b$)
![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_b$)
![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_b$)
![[Rail only]Ball retainer with LM Guide Wide rail SHW form](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| CAD |
| From |
| Days to Ship |
| Rail Length L(mm) |
| Block Type |
| Rail Width(mm) |
| Mounting Height H(mm) |
| Nominal Part Number |
| Rail Type |
| Set / Single Item |
| Preload |
| Accuracy |
| Material |
| Ball Arrangement |
| No. of Blocks |
| Retainer |
| Block Mounting Hole Pitch (Width Direction)(mm) |
| Block Mounting Hole Pitch (Length Direction)(mm) |
| Block Mounting Hole Diameter |
| Rail Mounting Hole Pitch(mm) |
| Rail Mounting Hole Diameter |
You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461747_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461736_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list. ![[Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/SHS25C.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000461725_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474370_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474381_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list.  | You can add up to 6 items per a category to the compare list. ![[Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000474369_001.jpg?$product_view_c$) | You can add up to 6 items per a category to the compare list. ![[Rail only]Ball retainer with LM Guide Wide rail SHW form](http://in.misumi-ec.com/linked/material/mech/THK1/PHOTO/221000476316_001.jpg?$product_view_c$) | |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | [Individual Block Units] Full-Ball Type LM Guide, International Standard, HSR Type | [Individual Block Units] Caged Ball LM Guide, International Standard, SHS Type | [Short Delivery Size] Full-Ball Type LM Guide, International Standard, HSR Type | [Short Delivery Size] Caged Ball LM Guide, International Standard, SHS Type | [Individual Block Units] Caged Ball LM Guide, Radial Type, SSR Type | [Individual Block Units] Full-Ball Type LM Guide, Radial, SR Type | [Individual Block Units] Full-Ball Type LM Guide, Wide Rail, HRW Model | [Individual Block Units] Caged Ball LM Guide, Wide Rail SHW Type | |||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| From | ₹ 6,870.16- | ₹ 6,832.66- | - | - | - | ₹ 7,870.69- | ₹ 7,404.50- | ₹ 15,143.08- | - | - | - | - | - | ₹ 15,669.77- | - |
| Days to Ship | 5 Day(s) or more | 5 Day(s) or more | 14 Day(s) or more | 7 Day(s) or more | 7 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 5 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 14 Day(s) or more | 5 Day(s) or more | 7 Day(s) or more |
| Rail Length L(mm) | - | - | 87 ～ 3000 | 73 ～ 2920 | 73 ～ 2920 | - | - | - | 71 ～ 3000 | 47 ～ 3000 | 73 ～ 3000 | 86 ～ 3000 | 108 ～ 3000 | - | 60 ～ 2920 |
| Block Type | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Standard / Wide | Wide | Standard / Wide | Standard | Wide Short | Wide | Wide | Wide | - |
| Rail Width(mm) | - | - | 20 ～ 63 | 15 ～ 34 | 15 ～ 34 | - | - | - | 15 ～ 28 | 15 ～ 20 | 23 | 42 | 69 | - | 37 ～ 42 |
| Mounting Height H(mm) | - | - | 30 ～ 90 | 28 ～ 55 | 24 ～ 55 | - | - | - | 24 ～ 42 | 24 ～ 28 | 33 | 27 | 35 | - | 21 ～ 27 |
| Nominal Part Number | 15 ～ 35 | 15 ～ 35 | 20 ～ 65 | 15 ～ 35 | 15 ～ 35 | 15 ～ 35 | 15 ～ 35 | 17 ～ 35 | 15 ～ 30 | 15 ～ 20 | 25 | 27 | 35 | 21 ～ 35 | 21 ～ 27 |
| Rail Type | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Wide | Standard | Standard | Standard | Wide | Wide | Wide | Wide |
| Set / Single Item | Block Only | Block Only | Set | Set | Set | Block Only | Block Only | Block Only | Set | Set | Set | Set | Set | Block Only | Rail Only |
| Preload | Standard | Standard | Standard / Light Preload / Medium Preload | Standard | Standard | Standard | Standard | Standard | Standard / Light Preload / Medium Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard / Light Preload | Standard / Light Preload / Medium Preload | Standard | Standard |
| Accuracy | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade / High Grade / Precision Grade / High Precision Grade / Ultra Precision Grade | Standard Grade | Standard Grade |
| Material | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel | Carbon Steel |
| Ball Arrangement | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | 4-Row, Circular | - |
| No. of Blocks | 1 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 | 1 / 2 / 3 / 4 | 1 | 1 | 1 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9 | 1 | - |
| Retainer | N/A | Available | N/A | N/A | Available | Available | N/A | N/A | Available | Available | N/A | N/A | Available | Available | - |
| Block Mounting Hole Pitch (Width Direction)(mm) | 26 ～ 82 | 26 ～ 72 | 32 ～ 142 | 26 ～ 82 | 26 ～ 72 | 26 ～ 60 | 26 ～ 82 | 31 ～ 107 | 26 ～ 72 | 26 ～ 32 | 60 | 46 | 107 | 31 ～ 107 | - |
| Block Mounting Hole Pitch (Length Direction)(mm) | 26 ～ 72 | 26 ～ 72 | 36 ～ 120 | 26 ～ 72 | 26 ～ 72 | 26 ～ 50 | 26 ～ 50 | 19 ～ 60 | 26 ～ 52 | 26 | - | 32 | 60 | 19 ～ 60 | - |
| Block Mounting Hole Diameter | 4 ～ 10 | 4 ～ 8.5 | 5 ～ 16 | 4 ～ 10 | 4 ～ 8.5 | 4 ～ 8 | 4 ～ 9 | 3.3 ～ 8 | 4 ～ 8.5 | 4 ～ 5 | 7 | 6 | 8 | 4.4 ～ 8 | - |
| Rail Mounting Hole Pitch(mm) | 60 ～ 80 | 60 ～ 80 | 60 ～ 150 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 60 ～ 80 | 40 ～ 80 | 60 ～ 80 | 60 | 60 | 60 | 80 | 50 ～ 80 | 50 ～ 60 |
| Rail Mounting Hole Diameter | 4.5 ～ 9 | 4.5 ～ 9 | 6 ～ 18 | 4.5 ～ 9 | 4.5 ～ 9 | 4.5 ～ 9 | 3.5 ～ 9 | 4.5 ～ 7 | 4.5 ～ 9 | 4.5 ～ 6 | 7 | 4.5 | 7 | 4.5 ～ 7 | 4.5 |
Loading...
Configure
Specification/Dimensions
-
Rail Length L(mm)
- 25
- 35
- 39
- 40
- 45
- 50
- 55
- 70
- 75
- 80
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 140
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 200
- 215
- 220
- 230
- 235
- 245
- 255
- 260
- 270
- 275
- 280
- 290
- 295
- 310
- 315
- 320
- 335
- 340
- 345
- 350
- 355
- 360
- 370
- 390
- 395
- 400
- 420
- 430
- 440
- 445
- 460
- 470
- 495
- 510
- 520
- 545
- 550
- 570
- 580
- 590
- 595
- 600
- 620
- 630
- 640
- 645
- 670
- 680
- 695
- 700
- 720
- 760
- 820
- 840
- 880
- 920
- 940
- 1000
- 1060
- 1080
- 1120
- 1160
- 1180
- 1240
- 1300
- 1320
- 1360
- 1400
- 1420
- 1480
- 1540
- 1560
- 1600
- 1640
- 1660
- 1720
- 1780
- 1800
- 1840
- 1880
- 1900
- 1960
[47-3000/1mm Unit(s)]
-
Block Type
-
Standard -
Short -
Wide -
Wide Long -
Long -
Extra Long -
Wide Short
-
-
Rail Width(mm)
-
Mounting Height H(mm)
-
Nominal Part Number
-
Rail Type
-
Standard -
Wide
-
-
Set / Single Item
- Set
- Block Only
- Rail Only
-
Preload
- Standard
- Light Preload
- Medium Preload
- Clearance
- Heavy Preload
See the accuracy standard of each manufacturer.
-
Accuracy
- Standard Grade
- High Grade
- Precision Grade
- High Precision Grade
- Ultra Precision Grade
See the accuracy standard of each manufacturer.
-
Material
-
Ball Arrangement
-
No. of Blocks
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
-
Retainer
-
Block Mounting Hole Pitch (Width Direction)(mm)
-
Block Mounting Hole Pitch (Length Direction)(mm)
-
Block Mounting Hole Diameter
-
Rail Mounting Hole Pitch(mm)
-
Rail Mounting Hole Diameter
Narrow search by specifying Manufacturer
Related Categories to Standard Linear Guides
FAQ linear guide
- Question: What are standard linear guides?
- Answer: Standard linear guides come in different configurations, such as:
1. Profiled Rail Guides: These linear guides have a rectangular-shaped rail with a corresponding carriage. They provide high load capacity and stiffness, making them suitable for applications that require precision and rigidity.
2. Round Rail Guides: These linear guides feature a round rail and a carriage with circular-shaped rolling elements. They offer smooth and quiet motion and are commonly used in applications with lower load capacities.
3. Compact Linear Guides: These linear guides are designed to have a smaller footprint and are suitable for applications with limited space. They often feature ball bearing-based systems and are used in various industries, including automation and robotics - Question: How do standard linear guides work?
- Answer: Standard linear guides, also known as linear motion systems are mechanical devices used to provide smooth and precise linear motion in various applications. Here's a short explanation of how they work
1. Rail and Slide block: A standard linear guide consists of two main components: a rail and a slide block. The rail is a long, straight and rigid structure that serves as a guide for the linear motion. The slide block is a movable component that rides along the rail.
2. Rolling Elements: Inside the slide block, there are ball rolling. These elements reduce friction, enable smooth motion along the rail and distribute the load evenly across the rail,
3. Lubrication: Some linear guides require lubrication to further reduce friction and ensure smooth operation. Lubricants can be applied to the bearing surfaces or be pre-lubricated within the slide block.
4. Mounting: Linear guides are usually mounted to a stationary base or structure, and the slide block is connected to the moving part or load that needs linear motion. - Question: What industries use standard linear guides?
- Answer: Standard linear guides, which provide precise linear motion control, are utilized in several industries such as
1. Manufacturing and Automation: These kinds of industries widely employ standard linear guides for accurate linear motion control in machine tools, assembly lines, conveyors, and robotic systems
2. Electronics and Semiconductor Industries: The semiconductor and electronics industries rely on linear guides for precise linear motion in equipment such as wafer handling systems, semiconductor manufacturing machines, electronic assembly lines, and so on
3. Medical Industries: Linear guides are used in medical and laboratory equipment for precise linear motion control in kinds of these machines such as surgical robots, measurement tools, and laboratory automation.
4. Printing industry: The printing industry utilizes linear guides to facilitate precise linear motion control in printing machinery systems such as paper handling systems, and paper converting equipment, ensuring high-quality printing and accurate paper handling. - Question: What are the benefits of using standard linear guides?
- Answer: By using standard linear guides offers several benefits in applications requiring precise linear motion control.
1. Precise Linear Motion Control
2. Smooth and Low-Friction Operation
3. High Load-Carrying Capacity
4. Repeatability and Positioning Accuracy
5. Enhanced System Stability
6. Durability and Longevity
7. Versatile and Customizable
8. Wide Range of Applications By utilizing standard linear guides, users can achieve precise, smooth, and reliable linear motion control in their designs, enhancing system performance, accuracy, and overall productivity in numerous applications. - Question: How to select the right standard linear guide for a specific application?
- Answer: Selecting the right standard linear guide for a specific application involves considering various factors. Here's a short step by step for selecting the linear guide
1. Load Capacity: Determine the maximum load the linear guide needs to support in the application. Consider both static and dynamic loads to ensure the guide can handle the required weight.
2. Travel Distance: Evaluate the required travel distance or stroke length of the linear motion and range of motion without exceeding its limits.
3. Precision Requirements: Assess the level of precision needed for the application. Consider factors such as positioning accuracy, repeatability, and smoothness of motion.
4. Speed and Acceleration: Determine the desired speed and acceleration of the linear motion.
5. Environmental Factors: Consider factors such as temperature, humidity, dust, and exposure to chemicals.
6. Mounting and Integration: Consider the mounting options and requirements for integrating the linear guide into the application.
7. Maintenance and Lubrication: Consider factors such as ease of maintenance, lubrication intervals, and access to lubrication points.
8. Budget and Cost Considerations: Evaluate the budget available for the linear guide
9. Consult Manufacturer's Recommendations: Review the manufacturer's specifications, guidelines, and recommendations for the specific linear guide models.
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy