OHKITA Dowel Pins, Spring Pins, Stepped Pins（Shape：Straight / Dual-Fit Dowel）

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dowel Pin With Inside Threads, E Type (With Straight Groove)

  OHKITA

  Dowel pin with internal thread that has a straight air release groove.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Positive Tolerance	15 ～ 100	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 84.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin B Type

  OHKITA

  Standard Okita knock pin developed for used in positioning of molds, jigs, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 13	Positive Tolerance	6 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 24.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin Inch Size

  OHKITA

  Inch size dowel pin.
  Material = SCM445 Equivalent; Hardness = HRC58 to 62
  Diametric Tolerance: +0.0001 to +0.0003 (Millimeters: +0.0025 to +0.0076)
  Parallel pin type developed for positioning when assembling molds, jigs, etc.
  Uses tough chromium molybdenum steel, allowing security with thrust loads as well.
  Surface hardness has been increased and been given an even smoother finish to avoid galling while driving in.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1/2 ～ 7/16	Positive Tolerance	1 ～ 7/8	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	-	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin Class B, h7 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces is the same.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Negative Tolerance	4 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Type A, M6【1-1,000 Pieces Per Package】

  OHKITA

  A pin with a positive tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 30	Positive Tolerance	4 ～ 200	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 5.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  

  Dowel Pin Type A

  OHKITA

  Standard Okita knock pin developed for use in positioning of molds, jigs, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 16	Positive Tolerance	6 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 24.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dowel Pin With Inside Threads, A Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Positive Tolerance	15 ～ 120	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 100.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin Type C

  OHKITA

  Standard Okita knock pin developed for used in positioning of molds, jigs, etc.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 13	Negative Tolerance	10 ～ 100	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 24.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread h7

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is h7.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 20	-	10 ～ 120	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 324.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  Dowel Pin with Internal Thread Type B (with Spiral Groove)

  OHKITA

  Dowel pin with internal thread with spiral air release groove. The tolerance is 0 to +0.005. Eighty types are available including sizes not shown in the catalog.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Positive Tolerance	20 ～ 120	Straight / Dual-Fit Dowel	Tapped	-	Steel	-	-	-	-

  From: ₹ 95.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS303

  OHKITA

  A dowel pin made of SUS303.
  Use for applications that require corrosion resistance.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 20	Positive Tolerance	4 ～ 120	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class B, h7【1-1,000 Pieces Per Package】

  OHKITA

  Pin with a negative tolerance.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  1 ～ 30	Negative Tolerance	4 ～ 200	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.

  From: ₹ 5.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin With Internal Thread m6

  OHKITA

  Internal threading makes insertion easy.
  The tolerance is m6.
  Material = S45C equivalent; hardness = HRC45 to 52; quenched and tempered.
  Material = SUS303 Equivalent. Use for applications where corrosion resistance is required.
  

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  5 ～ 25	-	10 ～ 140	Straight / Dual-Fit Dowel	Tapped	-	Stainless Steel ～ Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 324.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Dowel Pin With Inside Threads, C Type (With Spiral Grooved)

  OHKITA

  Dowel pin with internal thread that has a spiral air release groove.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  6 ～ 20	Negative Tolerance	20 ～ 100	Straight / Dual-Fit Dowel	Tapped	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 96.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 S45C-Q

  OHKITA

  Heat tempered dowel pin.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.
  Material = S45C Equivalent; Hardness = HRC23 to 33

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 30	Positive Tolerance	6 ～ 150	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class A, m6 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces varies on each side, but insertion should generally be from the flat tip.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Positive Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 144.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class B, h7 S45C-Q

  OHKITA

  Heat tempered dowel pin.
  The shape of the end surfaces is the same.
  Material = S45C Equivalent; Hardness = HRC23 to 33

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 30	Negative Tolerance	6 ～ 150	Straight / Dual-Fit Dowel	Standard	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 51.99
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Parallel Pin, Class B, h7 SUS316

  OHKITA

  A dowel pin made of SUS316.
  Resistance to pitting and gap corrosion has been improved through the use of SUS303.
  Features outstanding corrosion resistance to media such as sea water or salt water.
  The shape of the end surfaces is the same.

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  2 ～ 6	Negative Tolerance	4 ～ 30	Straight / Dual-Fit Dowel	Standard	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 144.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin [m6] S45C

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Polishing completed for m6 tolerance.
  Material = S45C Equivalent (No Heat Treatment)

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 25	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 460.51
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin [m6] SUS303

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Features outstanding corrosion resistance and machining resistance.
  Polishing completed for m6 tolerance.
  Material = SUS303 Equivalent

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 20	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 1,049.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin h7 S45C

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Polishing completed for h7 tolerance.
  Material = S45C Equivalent (No Heat Treatment)

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 25	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 460.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Parallel Pin [h7] SUS303

  OHKITA

  Pin is 300 mm or longer. Cut for use.
  Features outstanding corrosion resistance and machining resistance.
  Polishing completed for h7 tolerance.
  Material = SUS303 Equivalent

  Nominal Dia.	Shaft Dia. Tolerance	Length	Shape	End Shape	Outer Dia. (Max.)(mm)	Material	Properties	Outer Dia. (Min.)(mm)	Surface Treatment	Sales Unit
  3 ～ 20	-	300 ～ 350	Straight / Dual-Fit Dowel	-	-	Stainless Steel	Regular	-	Not Provided	Low Quantity (Available beginning with 1 pc.)

  From: ₹ 1,049.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Nominal Dia.
Shaft Dia. Tolerance
Length
Shape
End Shape
Outer Dia. (Max.)(mm)
Material
Properties
Outer Dia. (Min.)(mm)
Surface Treatment
Sales Unit

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA	OHKITA
Product Series	Dowel Pin With Inside Threads, E Type (With Straight Groove)	Dowel Pin B Type	Dowel Pin Inch Size	Parallel Pin Class B, h7 SUS303	Parallel Pin, Type A, M6【1-1,000 Pieces Per Package】	Dowel Pin Type A	Dowel Pin With Inside Threads, A Type (With Spiral Grooved)	Dowel Pin Type C	Parallel Pin With Internal Thread h7	Dowel Pin with Internal Thread Type B (with Spiral Groove)	Parallel Pin, Class A, m6 SUS303	Parallel Pin, Class B, h7【1-1,000 Pieces Per Package】	Parallel Pin With Internal Thread m6	Dowel Pin With Inside Threads, C Type (With Spiral Grooved)	Parallel Pin, Class A, m6 S45C-Q	Parallel Pin, Class A, m6 SUS316	Parallel Pin, Class B, h7 S45C-Q	Parallel Pin, Class B, h7 SUS316	Long Parallel Pin [m6] S45C	Long Parallel Pin [m6] SUS303	Long Parallel Pin h7 S45C	Long Parallel Pin [h7] SUS303
From	₹ 84.00-	₹ 24.00-	₹ 51.99-	₹ 51.99-	₹ 11.91-	₹ 24.00-	₹ 100.22-	₹ 24.00-	₹ 324.00-	₹ 95.45-	₹ 51.99-	₹ 11.78-	₹ 324.00-	₹ 96.96-	₹ 51.99-	₹ 144.00-	₹ 51.99-	₹ 144.00-	₹ 460.51-	₹ 1,049.85-	₹ 460.51-	₹ 1,049.85-
Days to Ship	Same day or more	5 Day(s) or more	Same day or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more
Nominal Dia.	6 ～ 20	3 ～ 13	1/2 ～ 7/16	1 ～ 20	1 ～ 30	3 ～ 16	6 ～ 20	3 ～ 13	5 ～ 20	6 ～ 20	1 ～ 20	1 ～ 30	5 ～ 25	6 ～ 20	3 ～ 30	2 ～ 6	3 ～ 30	2 ～ 6	3 ～ 25	3 ～ 20	3 ～ 25	3 ～ 20
Shaft Dia. Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Positive Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	-	Positive Tolerance	Positive Tolerance	Negative Tolerance	-	Negative Tolerance	Positive Tolerance	Positive Tolerance	Negative Tolerance	Negative Tolerance	-	-	-	-
Length	15 ～ 100	6 ～ 100	1 ～ 7/8	4 ～ 100	4 ～ 200	6 ～ 100	15 ～ 120	10 ～ 100	10 ～ 120	20 ～ 120	4 ～ 120	4 ～ 200	10 ～ 140	20 ～ 100	6 ～ 150	4 ～ 30	6 ～ 150	4 ～ 30	300 ～ 350	300 ～ 350	300 ～ 350	300 ～ 350
Shape	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel	Straight / Dual-Fit Dowel
End Shape	Tapped	Standard	Standard	Standard	Standard	Standard	Tapped	Standard	Tapped	Tapped	Standard	Standard	Tapped	Tapped	Standard	Standard	Standard	Standard	-	-	-	-
Outer Dia. (Max.)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Material	Steel	Steel	Steel	Stainless Steel	Steel	Steel	Steel	Steel	Stainless Steel ～ Steel	Steel	Stainless Steel	Steel	Stainless Steel ～ Steel	Steel	Steel	Stainless Steel	Steel	Stainless Steel	Steel	Stainless Steel	Steel	Stainless Steel
Properties	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	-	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular	Regular
Outer Dia. (Min.)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Surface Treatment	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	-	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided	Not Provided
Sales Unit	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	-	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.) ～ Box, Pkg.	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)	Low Quantity (Available beginning with 1 pc.)

Loading...