KYOCERA Grooving / Cutting Off Holders

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBA Type

  KYOCERA

  [Features]This is a lever lock type holder that can be used for shallow grooving on outer diameters.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 10,199.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder KGD Model (Combination)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 11,795.75
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE Type Compatible Chip

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 1,496.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; lubrication hole (oil hole): yes; screw clamp enables good cutting chip discharge

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 13,240.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Chip for Grooving

  KYOCERA

  The edge width tolerance of GB32$050 is different. (0.50 + 0.05 0)

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 1,259.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDM Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,224.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDM Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,016.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting Holder [for GV Tip]

  KYOCERA

  Right-handed (R) insert and left-handed (L) insert are compatible with right-handed (R) holder and left-handed (L) holder respectively.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 18,599.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning Bit Compatible Bit

  KYOCERA

  B dimension: Indicates machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 1,984.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDS-S Type Blade for Grooving/Plunging

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 0; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 6,702.02
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / No-hand	-	-	-

  From: ₹ 1,183.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  KGDF Type End Face Grooving GDFM/GDFMS Types

  KYOCERA

  Use a DM breaker for deep grooves when cutting chip processing is not stable during grooving with a general purpose GM breaker.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 965.67
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip (For Small Diameters) TKF Type

  KYOCERA

  [Features]
  · Lead angle (front cutting blade angle: θ) indicates the angle when mounted to the holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 1,819.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 10,199.04
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)

  KYOCERA

  If using GMG/GMM type (2-cornered) inserts, set the maximum grooving depth to 15 mm.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 12,201.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Punching Blade KTKB-S Type

  KYOCERA

  P is a special breaker designed for automatic lathes and other low feeds. At feeds of 0.03 to 0.08 mm/rev the chips are small curls and excellent chip discharge performance is demonstrated.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 10,451.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMM Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,389.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving Holder KGM Type (For Automatic Board)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGM & 1212H-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 10,504.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip GDMS Type

  KYOCERA

  When groove machining is performed with PF and PM breakers (for parting), the groove bottom shape will not be flat.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 900.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Cutter Holder (Integrated Type) KTKH-S Type

  KYOCERA

  [Specifications]·Machining applications: parting-off; holder angle (°): 0; type: integrated type; compatible insert: TKN, TKN-P, TKR/L, TKR/L-P

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	-	-	-	-

  From: ₹ 11,958.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For outer diameter relief cut grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 13,570.29
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)

  KYOCERA

  T dimension: Shows the machinable groove depth.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 2,443.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Small Bore Slotting System Bar, Model VNG

  KYOCERA

  Solid type system bar.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 3,389.98
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)

  KYOCERA

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,877.38
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooved End Face Blade KGDF Type

  KYOCERA

  [Specifications]·Machining applications: flanges, blind holes; compatible insert shape: non-ISO standard; clamp method: non-ISO standard

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 8,827.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDG Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,281.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)

  KYOCERA

  If the holder is used as a positive tool, the holder jaw could interfere with the tool presetter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 11,482.60
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMN Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,223.75
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.
  For outer diameter deep grooving.
  A right angle type.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 14,072.56
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip

  KYOCERA

  [Features]Carbide materials and Cermet materials are used, and some are coated with CVD and PVD coatings.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 2,014.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type

  KYOCERA

  [Specifications]·Machining applications: grooving; holder angle (°): 90; compatible insert: for GH and GHU inserts; type: integrated

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Left-hand	-	-	-

  From: ₹ 17,157.18
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / End Face Grooving Holder KFMS Type

  KYOCERA

  Takinor multi-functional large inner diameter deep grooving holder / large inner diameter undercut grooving holder.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	4	-	Right-hand	50	-	20

  From: ₹ 17,730.44
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Slit Tip KGD Type (for Automatic Plate)

  KYOCERA

  4.0 mm wide insert can also be mounted on KGDR/L1212JX-3, but this is not recommended due to the lack of holder rigidity.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 11,052.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder GVF

  KYOCERA

  A clamp-on holder for face grooving.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Edge surface grooving	-	-	-	-	-	-

  From: ₹ 16,811.13
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Grooving Holder KGD-S

  KYOCERA

  [Features]
  · KGD-S type: Realizes high efficiency machining thanks to the excellent chip discharge performance and high rigidity holder.
  [Applications]
  · Holder for Grooving and Cutting Off

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  Cutting off	-	-	-	-	-	-

  From: ₹ 13,015.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder KGBAS Type

  KYOCERA

  A lever-lock type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 11,058.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type

  KYOCERA

  A clamp-on type outer diameter shallow grooving holder.
  [Shank Material]Steel

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 11,058.93
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning (Cutter) Bit GDMS Model

  KYOCERA

  Conventional insert mounting to new holders is not recommended.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 671.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)

  KYOCERA

  [Specifications]·Machining applications: grooving / parting-off; holder angle (°): 90; type: modular type (blade); compatible tip: GDM, GDMS, GDG, GDGS

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 10,002.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip GMG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	No-hand	-	-	-

  From: ₹ 1,655.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Grooving (Cutting-Off) Chip FGG Type

  KYOCERA

  Sharp edge specification enables 40% reduction in cutting resistance from C surface specification.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 2,734.58
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model

  KYOCERA

  Machinable groove depth is limited depending on workpiece diameter.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 967.93
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type

  KYOCERA

  A holder for the multi-function tool "TAKINOL" series.
  For outer diameter grooving and face grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand	-	-	-

  From: ₹ 13,570.29
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type

  KYOCERA

  [Features]It can be used for shallow grooving on the outer diameter and can be used for GH, GHU and GA inserts.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 12,350.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type

  KYOCERA

  A clamp-on type outer diameter deep grooving holder.
  For outer diameter deep grooving.

  Application	Groove Width(mm)	Maximum Groove Depth(mm)	Selfishly	Maximum Machining Diameter(mm)	Number of corners for tip use	Shank height(mm)
  -	-	-	Right-hand / Left-hand	-	-	-

  From: ₹ 12,350.09
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

Brand
Product Series
From
Days to Ship
Application
Groove Width(mm)
Maximum Groove Depth(mm)
Selfishly
Maximum Machining Diameter(mm)
Number of corners for tip use
Shank height(mm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA	KYOCERA
Product Series	Outer Diameter Shallow Groove Holder KGBA Type	Lathe Turning/Cutting Holder KGD Model (Combination)	Inner Diameter Groove SIGE Type Compatible Chip	Inner Diameter Groove SIGE-EH Type Excellent Bar (with Coolant Hole)	Chip for Grooving	Slit Tip GDM Type	Lathe Turning (Cutter) Bit GDM Model	Small Bore Slotting Holder [for GV Tip]	Lathe Turning Bit Compatible Bit	KGDS-S Type Blade for Grooving/Plunging	Lathe Turning/Cutting (Multi-Function) Bit GMM Model	KGDF Type End Face Grooving GDFM/GDFMS Types	Slit Tip (For Small Diameters) TKF Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGB Type	Multi-Functional / Grooving Holder KGM -T Type (Deep Grooving Type)	Punching Blade KTKB-S Type	Multi-Functional / Grooving (Cutting-Off) Chip GMM Type	Multi-Functional / Grooving Holder KGM Type (For Automatic Board)	Slit Tip GDMS Type	Cutter Holder (Integrated Type) KTKH-S Type	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving And End Surface Grooving) KGMU Type (Outer Diameter Sliding Groove Holder)	Inner Diameter Groove EZG Type (Small Inner Diameter Grooving)	Small Bore Slotting System Bar, Model VNG	Multi-Functional / Inner Diameter Grooving Holder (KIGM-V Type)	Grooved End Face Blade KGDF Type	Lathe Turning (Cutter) Bit GDG Model	Lathe Turning (Cutter) Holder KGD Model (for Combination/Automatic Type)	Lathe Turning/Cutting (Multi-Function) Bit GMN Model	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGHS Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] Compatible Chip	Large Inner Diameter Deep Grooved Holder [For TG Tip] KITG Type	Multi-Functional / End Face Grooving Holder KFMS Type	Slit Tip KGD Type (for Automatic Plate)	Grooving Holder GVF	Grooving Holder KGD-S	Outer Diameter Shallow Groove Holder KGBAS Type	Outer Diameter Shallow Groove Holder [for GB/GBA Chip] KGBS Type	Lathe Turning (Cutter) Bit GDMS Model	Lathe Turning/Cutting Holder Main Body KGDS-S Model (Right Angle Type: 90°, Parting Type)	Multi-Functional / Grooving (Cutting-Off) Chip GMG Type	Multi-Functional / Grooving (Cutting-Off) Chip FGG Type	Lathe Turning/Cutting (Multi-Function) Bit GMM/GMN Model	Multi-Functional / Shallow Grooving Holder (For Outer Diameter Grooving / End Grooving) KGMM Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGH Type	Outer Diameter Deep Groove Holder [for GH/GHU/GA Chip] KGA Type
From	₹ 10,199.04-	₹ 11,795.75-	₹ 1,496.98-	₹ 13,240.80-	₹ 1,259.91-	₹ 1,224.18-	₹ 1,016.15-	₹ 18,599.98-	₹ 1,984.53-	₹ 6,702.02	₹ 1,183.56-	₹ 965.67-	₹ 1,819.78-	₹ 10,199.04-	₹ 12,201.93	₹ 10,451.35-	₹ 1,389.84-	₹ 10,504.56-	₹ 900.96-	₹ 11,958.16-	₹ 13,570.29	₹ 2,443.02-	₹ 3,389.98-	₹ 1,877.38	₹ 8,827.91-	₹ 1,281.76-	₹ 11,482.60	₹ 1,223.75	₹ 14,072.56-	₹ 2,014.00-	₹ 17,157.18	₹ 17,730.44	₹ 11,052.65-	₹ 16,811.13-	₹ 13,015.93-	₹ 11,058.93-	₹ 11,058.93-	₹ 671.93-	₹ 10,002.29	₹ 1,655.04-	₹ 2,734.58	₹ 967.93-	₹ 13,570.29	₹ 12,350.09-	₹ 12,350.09-
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	8 Day(s) or more	8 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	8 Day(s) or more	6 Day(s) or more	8 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	8 Day(s) or more	5 Day(s) or more	9 Day(s) or more
Application	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	Edge surface grooving	-	Edge surface grooving	Cutting off	-	-	-	-	-	-	-	-	-	-
Groove Width(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	4	-	-	-	-	-	-	-	-	-	-	-	-	-
Maximum Groove Depth(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Selfishly	Right-hand / Left-hand	Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Left-hand	Right-hand / No-hand	No-hand	Right-hand / Left-hand	Right-hand / Left-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand	-	Right-hand	Right-hand	Right-hand	No-hand	Right-hand / Left-hand	No-hand	Left-hand	No-hand	Right-hand / Left-hand	No-hand	Left-hand	Right-hand	Right-hand / Left-hand	-	-	Right-hand / Left-hand	Right-hand / Left-hand	No-hand	Right-hand / Left-hand	No-hand	Right-hand	Right-hand	Right-hand	Right-hand / Left-hand	Right-hand / Left-hand
Maximum Machining Diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	50	-	-	-	-	-	-	-	-	-	-	-	-	-
Number of corners for tip use	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Shank height(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	20	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...