Square End Mills (HSS)（Coating：Non-Coated）

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill For Keyway (Negative Tolerance)

  FUKUDA

  Endmill dedicated for key groove machining. Negative blade diameter tolerance. A straight shank.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	5 ～ 30	6 ～ 25	2	50 ～ 100	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Other	Non-Coated	Square	Other	Available	Alloy HSS	-	-

  From: ₹ 2,682.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Short Type EDS

  OSG

  High-speed steel square series.
  Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
  Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
  Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.45 ～ 60	1.1 ～ 80	6 ～ 42	2	45 ～ 170	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,748.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Type, 4-Flute Multi-Flute Center Cut CC-EMS

  OSG

  Cobalt high-speed steel center cut.
  Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
  Coating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4
  Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,917.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Short Type) XPM-EDS

  OSG

  2-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,533.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS2T, 2-Flute Short Blade

  SANKO MFG

  A 2-flutes end mill for finishing.
  Materials: HS-Co (cobalt high-speed steel)
  Outer diameter tolerance: -0.03 to 0
  Helix angle: 30°
  Blade Tip Shape: Sharp Corner

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 60	2 ～ 85	6 ～ 42	2	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,566.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (3-Flute General Purpose Short Type) ETS

  OSG

  General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 30	2.5 ～ 55	6 ～ 25	3	45 ～ 125	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,059.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (Multi-Flute Short Type) XPM-EMS

  OSG

  4-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	55 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,770.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Special Long Shank End Mill, 4-Flute

  FUKUDA

  The shank has been made especially long for deep engraving. Designed with a thin shank.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	100 ～ 350	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 4,312.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SL Slotting Regular Flute

  SANKO MFG

  A straight blade type 2-flutes end mill.
  Materials: HS-Co (cobalt high-speed steel)
  Outer diameter tolerance: -0.03 to 0
  Straight Blade

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 49	10 ～ 60	6 ～ 32	2	60 ～ 170	general steel[○] / Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	No torsion	Available	Cobalt HSS	-	-

  From: ₹ 1,649.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated 4-flute long flute length type
  ·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,029.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

  OSG

  Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,691.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute (Standard Blade)

  FUKUDA

  Wide range of blade lengths and an abundance of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 100	2 ～ 80	6 ～ 42	2	42 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,020.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 125	6 ～ 42	4	58 ～ 220	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,682.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,193.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Medium Type EDN

  OSG

  General-purpose 2-flute end mill medium type using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	45 ～ 110	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,824.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Long Type EDL

  OSG

  General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,050.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 120	6 ～ 42	2	53 ～ 215	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,417.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Extra Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 60	2.5 ～ 300	6 ～ 42	2	42 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,518.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute (Standard Blade)

  FUKUDA

  Side cutting and groove re-polishing are easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 100	13 ～ 80	6 ～ 42	4	51 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,153.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Extra Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 60	30 ～ 300	6 ～ 42	4	70 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,782.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill G2

  ASAHI TOOLS

  The number of regrinding times is increased by adopting a long blade specification and a sinking sensor shape. "Machining application (machining shape)" side surface/groove," Tool material: "High speed steel, "Work material": General steel/Heat-treated steel/Cast iron/Aluminum/Copper/ Resin, "Helix angle": weak twist (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 42	4 ～ 6	90 ～ 280	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	Side / Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: ₹ 13,463.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Pattern 2 Flute End Mill SLE-MT (SKH51)

  TAIYO-TOOL

  [Cutting Edge Shape Type]
  · Square
  [Tool Grade]
  · High-speed steel
  [Coating]
  · Non-Coated
  [Flute No.] 2-Flute

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1/2 ～ 51	30 ～ 65	-	2	119 ～ 235.5	-	-	Non-Coated	Square	-	-	High-speed steel	-	-

  From: ₹ 6,363.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

  MISUMI

  [Features]
  ·High-speed steel uncoated square short flute length 2-flute type with up to ø50
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	2	45 ～ 165	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 718.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated 4-flute regular blade length type
  ·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	12 ～ 68	6 ～ 25	4	55 ～ 144	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 921.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EKD (OH1)

  OSG

  General-purpose 2-flute keyway end mill with a cutting diameter tolerance of 0 to +0.02.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: ₹ 1,887.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Medium Type) XPM-EDN

  OSG

  2-flute end mill medium type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	55 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,672.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (2-Flute Short Type for Aluminum) AL-EDS

  OSG

  2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 30	4 ～ 55	6 ～ 25	2	45 ～ 125	Aluminum[◎] / Copper[○] / Resin[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,867.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Special Long Shank End Mill, 2-Flute

  FUKUDA

  The shank has been made especially long for deep engraving. Designed with a thin shank.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	2	100 ～ 350	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 4,219.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 6-Flute Extra Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  50 ～ 60	150 ～ 300	42	6	245 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 89,261.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VSM4T 4-Flute Regular Flute

  SANKO MFG

  A 4-flute end mill for finish machining. The outer diameter tolerance is positive.

  • Volume Discount

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,714.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  BS Handle Long Spiral End Mill LSPE-BS (SKH51)

  TAIYO-TOOL

  [Cutting Edge Shape Type]
  · Square
  [Tool Grade]
  · High-speed steel
  [Coating]
  · Non-Coated
  [Torsion Angle (θ)]
  · Weak Torsion (15°-25°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 50	60 ～ 150	-	6 ～ 12	162 ～ 285	-	-	Non-Coated	Square	Weak torsion (15 to 25˚)	-	High-speed steel	-	-

  From: ₹ 7,886.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Patter Long Spiral End Mill LSPE-MT (SKH51)

  TAIYO-TOOL

  [Cutting Edge Shape Type]
  · Square
  [Tool Grade]
  · High-speed steel
  [Coating]
  · Non-Coated
  [Torsion Angle (θ)]
  · Weak Torsion (15°-25°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  14 ～ 45	60 ～ 150	-	6 ～ 10	150 ～ 290	-	-	Non-Coated	Square	Weak torsion (15 to 25˚)	-	High-speed steel	-	-

  From: ₹ 8,282.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder square uncoated short flute length 2-flute type that can expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	45 ～ 150	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,139.58
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated long flute length 2-flute type of high speed steel powder square that can expect for durability
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	2	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,329.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder square uncoated short flute length 4-flute type that expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	8 ～ 45	6 ～ 25	4	52 ～ 121	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,236.02
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type

  MISUMI

  [Features]
  ·High speed steel powder square uncoated regular flute length 4-flute type that can expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,274.87
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type

  MISUMI

  [Features]
  ·Powdered high speed steel powder square uncoated long flute length 4-flute type that can expect for durability
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,439.62
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]
  ·High-speed steel uncoated square regular blade length 2-flute type with up to ø50
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 757.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model

  MISUMI

  [Features]
  ·High-speed steel uncoated square long flute length 2-flute type with up to ø50
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 2 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	2	60 ～ 195	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 856.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated 4-flute short blade length type
  ·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Non-Coated
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	8 ～ 65	6 ～ 32	4	52 ～ 150	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 796.71
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, 2-Flute 2SE

  NACHI(FUJIKOSHI)

  A general-purpose end mill that can process anything from steel to stainless steel and aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2 ～ 70	6 ～ 42	2	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 1,766.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, 4-Flute 4SE

  NACHI(FUJIKOSHI)

  A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 70	6 ～ 42	4	50 ～ 160	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 1,914.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, Regular Shank, Long 4-Flute RSL4SE

  NACHI(FUJIKOSHI)

  General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  4 ～ 18	20 ～ 65	6 ～ 16	4	55 ～ 120	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 2,314.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, Regular Shank, 4-Flute 4RSE

  NACHI(FUJIKOSHI)

  [Features]
  A super hard general purpose end mill with 4 flutes.
  It is made of cobalt high speed steel and offers high cost-effectiveness.
  [Applications]
  Suitable for side milling, etc., at wide sides and deep sides.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  4 ～ 18	12 ～ 40	6 ～ 16	4	45 ～ 95	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 1,965.89
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Super Hard, Regular Shank, Long 2-Flute RSL2SE

  NACHI(FUJIKOSHI)

  General-purpose end mill. Suitable for deep grooving and grooving at deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  4 ～ 18	20 ～ 65	6 ～ 16	2	55 ～ 120	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 2,129.31
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	FUKUDA	OSG	OSG	OSG	SANKO MFG	OSG	OSG	FUKUDA	SANKO MFG	MISUMI	OSG	FUKUDA	FUKUDA	MISUMI	OSG	OSG	FUKUDA	FUKUDA	FUKUDA	FUKUDA	ASAHI TOOLS	TAIYO-TOOL	MISUMI	MISUMI	OSG	OSG	OSG	FUKUDA	FUKUDA	SANKO MFG	TAIYO-TOOL	TAIYO-TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)
Product Series	End Mill For Keyway (Negative Tolerance)	2-flute, General-purpose, Short Type EDS	Short Type, 4-Flute Multi-Flute Center Cut CC-EMS	XPM End Mill (2-Flute Short Type) XPM-EDS	VS2T, 2-Flute Short Blade	End Mill (3-Flute General Purpose Short Type) ETS	XPM End Mill (Multi-Flute Short Type) XPM-EMS	Special Long Shank End Mill, 4-Flute	SL Slotting Regular Flute	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	3S End Mill, 2-Flute (Standard Blade)	3S End Mill, 4-Flute Long Blade	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	2-flute, General-purpose, Medium Type EDN	2-flute, General-purpose, Long Type EDL	3S End Mill, 2-Flute Long Blade	3S End Mill, 2-Flute Extra Long Blade	3S End Mill, 4-Flute (Standard Blade)	3S End Mill, 4-Flute Extra Long Blade	HSP Long High Spiral End Mill G2	MT Pattern 2 Flute End Mill SLE-MT (SKH51)	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	For 2-Flute Keyway EKD (OH1)	XPM End Mill (2-Flute Medium Type) XPM-EDN	End Mill (2-Flute Short Type for Aluminum) AL-EDS	Special Long Shank End Mill, 2-Flute	3S End Mill, 6-Flute Extra Long Blade	VSM4T 4-Flute Regular Flute	BS Handle Long Spiral End Mill LSPE-BS (SKH51)	MT Patter Long Spiral End Mill LSPE-MT (SKH51)	Powdered High-Speed Steel Square End Mill, 2-Flute, Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 2-Flute, Long / Non-Coated Model	Powdered High-Speed Steel Square End Mill, 4-Flute / Short / Non-Coated Model	Powdered High-Speed Steel Square End Mill 4-Flute / Regular / Non-Coated Type	Powdered High-Speed Steel Square End Mill 4-Flute / Long / Non-Coated Type	High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 2-Flute / Long / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Short / Non-Coated Model	Super Hard, 2-Flute 2SE	Super Hard, 4-Flute 4SE	Super Hard, Regular Shank, Long 4-Flute RSL4SE	Super Hard, Regular Shank, 4-Flute 4RSE	Super Hard, Regular Shank, Long 2-Flute RSL2SE
From	₹ 2,682.35	₹ 1,748.25	₹ 1,917.02	₹ 2,533.15	₹ 1,566.11	₹ 2,059.00	₹ 2,770.22	₹ 4,312.15	₹ 1,649.15	₹ 1,029.76	₹ 3,691.73	₹ 2,020.69	₹ 2,682.35	₹ 1,193.16	₹ 1,824.60	₹ 2,050.96	₹ 2,417.15	₹ 2,518.95	₹ 2,153.29	₹ 2,782.80	₹ 13,463.95	₹ 6,363.44	₹ 718.80	₹ 921.27	₹ 1,887.56	₹ 2,672.44	₹ 1,867.47	₹ 4,219.27	₹ 89,261.89	₹ 1,714.78	₹ 7,886.33	₹ 8,282.78	₹ 1,139.58	₹ 1,329.78	₹ 1,236.02	₹ 1,274.87	₹ 1,439.62	₹ 757.85	₹ 856.76	₹ 796.71	₹ 1,766.20	₹ 1,914.87	₹ 2,314.15	₹ 1,965.89	₹ 2,129.31
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications										Non-Coated 4 Flutes L (Long)				Non-Coated 2 Flutes R (Regular)									Non-Coated 2 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)									Non-Coated 2 Flutes S (Short)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)	Non-Coated 4 Flutes R (Regular)	Non-Coated 4 Flutes L (Long)	Non-Coated 2 Flutes R (Regular)	Non-Coated 2 Flutes L (Long)	Non-Coated 4 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 30	0.45 ～ 60	2.5 ～ 40	0.8 ～ 40	1 ～ 60	1 ～ 30	2 ～ 40	8 ～ 50	2 ～ 49	3 ～ 40	8 ～ 50	0.8 ～ 100	3 ～ 50	1 ～ 25	1 ～ 20	0.8 ～ 40	3 ～ 50	0.8 ～ 60	3 ～ 100	3 ～ 60	10 ～ 60	1/2 ～ 51	1 ～ 50	3 ～ 30	3 ～ 25	1 ～ 20	1.5 ～ 30	8 ～ 50	50 ～ 60	3 ～ 40	10 ～ 50	14 ～ 45	1 ～ 40	3 ～ 25	3 ～ 25	3 ～ 25	3 ～ 25	1 ～ 25	3 ～ 40	3 ～ 40	1 ～ 50	2.5 ～ 50	4 ～ 18	4 ～ 18	4 ～ 18
Blade length (ℓ)(mm)	5 ～ 30	1.1 ～ 80	10 ～ 65	2 ～ 65	2 ～ 85	2.5 ～ 55	8 ～ 65	20 ～ 75	10 ～ 60	15 ～ 110	20 ～ 75	2 ～ 80	20 ～ 125	3.5 ～ 60	3.5 ～ 45	6 ～ 110	15 ～ 120	2.5 ～ 300	13 ～ 80	30 ～ 300	10 ～ 200	30 ～ 65	2.5 ～ 75	12 ～ 68	5 ～ 25	3.5 ～ 45	4 ～ 55	20 ～ 75	150 ～ 300	10 ～ 65	60 ～ 150	60 ～ 150	2.5 ～ 65	15 ～ 90	8 ～ 45	12 ～ 68	15 ～ 90	3.5 ～ 60	15 ～ 110	8 ～ 65	2 ～ 70	7 ～ 70	20 ～ 65	12 ～ 40	20 ～ 65
Shank diameter (d)(mm)	6 ～ 25	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 20	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 42	10 ～ 42	-	6 ～ 42	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 25	6 ～ 42	42	6 ～ 32	-	-	6 ～ 32	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 32	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 16	6 ～ 16	6 ～ 16
Number of flutes(sheet)	2	2	4	2	2	3	4	4	2	4	4	2	4	2	2	2	2	2	4	4	4 ～ 6	2	2	4	2	2	2	2	6	4	6 ～ 12	6 ～ 10	2	2	4	4	4	2	2	4	2	4	4	4	2
Overall Length (L)(mm)	50 ～ 100	45 ～ 170	50 ～ 150	50 ～ 165	50 ～ 185	45 ～ 125	55 ～ 165	100 ～ 350	60 ～ 170	60 ～ 195	80 ～ 350	42 ～ 180	58 ～ 220	45 ～ 130	45 ～ 110	50 ～ 195	53 ～ 215	42 ～ 400	51 ～ 180	70 ～ 400	90 ～ 280	119 ～ 235.5	45 ～ 165	55 ～ 144	50 ～ 95	55 ～ 125	45 ～ 125	100 ～ 350	245 ～ 400	50 ～ 150	162 ～ 285	150 ～ 290	45 ～ 150	60 ～ 160	52 ～ 121	55 ～ 144	60 ～ 160	45 ～ 130	60 ～ 195	52 ～ 150	50 ～ 160	50 ～ 160	55 ～ 120	45 ～ 95	55 ～ 120
work material	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	-	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	-	-	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]
Machining Application	Other	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove	Side / Groove	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	-	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Other	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)
Base Blade Y/N	Available	-	-	-	Available	-	-	Available	Available	Available	-	Available	Available	Available	-	-	Available	Available	Available	Available	Available	-	Available	Available	-	-	-	Available	Available	Available	-	-	Available	Available	Available	Available	Available	Available	Available	Available	-	-	-	-	-
Tool Material Type	Alloy HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Alloy HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Alloy HSS	Alloy HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	Alloy HSS	High-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	Cobalt HSS	High-speed steel	High-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	Straight	Straight	Straight	-	Straight	Straight	-	-	-	Straight	-	-	-	Straight	Straight	-	-	-	-	-	-	-	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Loading...