Square End Mills (HSS)

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill For Keyway (Negative Tolerance)

  FUKUDA

  Endmill dedicated for key groove machining. Negative blade diameter tolerance. A straight shank.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	5 ～ 30	6 ～ 25	2	50 ～ 100	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Other	Non-Coated	Square	Other	Available	Alloy HSS	-	-

  From: ₹ 2,682.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Short Type EDS

  OSG

  High-speed steel square series.
  Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
  Coating: uncoated, standard/Alteration category: Manufacturer's standard product, Number of flutes (pcs.): 2
  Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.45 ～ 60	1.1 ～ 80	6 ～ 42	2	45 ～ 170	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,748.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Type, 4-Flute Multi-Flute Center Cut CC-EMS

  OSG

  Cobalt high-speed steel center cut.
  Tool Material: Cobalt High-Speed Steel, Work Material: General Steel/Stainless Steel/Cast Iron/Aluminum/Copper
  Coating: Uncoated, Standard/Alteration Category: Manufacturer's standard product, Number of flutes (pcs.): 4
  Helix angle: Standard helix (30 to 44°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,917.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Short Type EX-TIN-EDS

  OSG

  TiN coated general-purpose 2-flute short type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 50	1.6 ～ 75	6 ～ 42	2	45 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,342.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Short Type) XPM-EDS

  OSG

  2-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	2 ～ 65	6 ～ 32	2	50 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,533.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VS2T, 2-Flute Short Blade

  SANKO MFG

  A 2-flutes end mill for finishing.
  Materials: HS-Co (cobalt high-speed steel)
  Outer diameter tolerance: -0.03 to 0
  Helix angle: 30°
  Blade Tip Shape: Sharp Corner

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 60	2 ～ 85	6 ～ 42	2	50 ～ 185	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,566.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Long Type EX-TIN-EDL

  OSG

  TiN coated general-purpose 2-flute end mill long type. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,078.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 25	15 ～ 50	5 ～ 24	2	85 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,971.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (3-Flute General Purpose Short Type) ETS

  OSG

  General-purpose 3-flute end mill short type using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 30	2.5 ～ 55	6 ～ 25	3	45 ～ 125	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,059.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (Multi-Flute Short Type) XPM-EMS

  OSG

  4-flute end mill short type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 40	8 ～ 65	6 ～ 32	4	55 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,770.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM High Helix Long Type V-XPM-EHL

  OSG

  High torsion type long blade series with great sharpness. V coating provides stable tool service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3 ～ 4	75 ～ 200	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 5,639.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Special Long Shank End Mill, 4-Flute

  FUKUDA

  The shank has been made especially long for deep engraving. Designed with a thin shank.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	100 ～ 350	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 4,312.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SL Slotting Regular Flute

  SANKO MFG

  A straight blade type 2-flutes end mill.
  Materials: HS-Co (cobalt high-speed steel)
  Outer diameter tolerance: -0.03 to 0
  Straight Blade

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2 ～ 49	10 ～ 60	6 ～ 32	2	60 ～ 170	general steel[○] / Quenched and tempered steel[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	No torsion	Available	Cobalt HSS	-	-

  From: ₹ 1,649.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute Medium Type EX-TIN-EDN

  OSG

  TiN coated general-purpose 2-flute medium type end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	45 ～ 110	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,973.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  4-flute Long Type EX-TIN-EML

  OSG

  30° threaded cobalt HSS square end mill with TiN coating.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 3,334.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)

  OSG

  Powder HSS XPM key grooving end mill with V-coating

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 12	5 ～ 15	6 ～ 12	2	50 ～ 70	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,208.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (4-flute short type) V-XPM-EMS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 40	10 ～ 65	6 ～ 32	4	55 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,675.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS

  OSG

  Long shank end mill with 4 flutes for deep engraving. The shank diameter is designed to be thinner than the blade diameter.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  8 ～ 50	20 ～ 75	6 ～ 42	4	80 ～ 350	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,691.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute (Standard Blade)

  FUKUDA

  Wide range of blade lengths and an abundance of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 100	2 ～ 80	6 ～ 42	2	42 ～ 180	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,020.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 4-Flute Long Blade

  FUKUDA

  Long blade for cutting such as deep grooving and wide widths Repolishing is easy

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	20 ～ 125	6 ～ 42	4	58 ～ 220	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,682.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model

  MISUMI

  [Features]
  ·High speed steel powder square uncoated regular flute length 2-flute type that can expect for durability
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 25	3.5 ～ 60	6 ～ 25	2	45 ～ 130	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,193.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated 4-flute long flute length type
  ·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
  ·Suitable for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 110	6 ～ 32	4	60 ～ 195	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 1,029.76
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Medium Type EDN

  OSG

  General-purpose 2-flute end mill medium type using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	45 ～ 110	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,824.60
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (2-flute short type) V-XPM-EDS

  OSG

  Made of V coated powder HSS XPM. Provides excellent sharpness and stable tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 40	2.5 ～ 65	6 ～ 32	2	50 ～ 165	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 3,362.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS

  OSG

  [Features]
  · Adopts TiN coating with excellent weld resistance and abrasion resistance.
  · Those with outer diameter of 41 mm or more have center holes.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  2.5 ～ 50	7 ～ 75	6 ～ 42	4 ～ 6	50 ～ 165	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,580.02
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 50	15 ～ 120	6 ～ 42	2	53 ～ 215	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,417.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3S End Mill, 2-Flute Extra Long Blade

  FUKUDA

  Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 60	2.5 ～ 300	6 ～ 42	2	42 ～ 400	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Plane / Side / Groove / Plunging (Z feed)	Non-Coated	Square	Standard torsion (30-40°)	Available	Alloy HSS	-	-

  From: ₹ 2,518.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SS4T S Coating STEC 4-Flute Short

  SANKO MFG

  [Features]
  · 4-flute finishing endmill with TiCN coating.
  · High grade powder metallurgy HSS with S-coating.
  · Ideal for Finish Machining

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	10 ～ 65	6 ～ 32	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	Plane / Side / Groove / Inclined Cuts	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 3,164.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSP Long High Spiral End Mill G2

  ASAHI TOOLS

  The number of regrinding times is increased by adopting a long blade specification and a sinking sensor shape. "Machining application (machining shape)" side surface/groove," Tool material: "High speed steel, "Work material": General steel/Heat-treated steel/Cast iron/Aluminum/Copper/ Resin, "Helix angle": weak twist (1 to 29°)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  10 ～ 60	10 ～ 200	10 ～ 42	4 ～ 6	90 ～ 280	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	Side / Groove	Non-Coated	Square	Weak torsion (15 to 25˚)	Available	Alloy HSS	-	-

  From: ₹ 13,463.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MT Pattern 2 Flute End Mill SLE-MT (SKH51)

  TAIYO-TOOL

  [Cutting Edge Shape Type]
  · Square
  [Tool Grade]
  · High-speed steel
  [Coating]
  · Non-Coated
  [Flute No.] 2-Flute

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1/2 ～ 51	30 ～ 65	-	2	119 ～ 235.5	-	-	Non-Coated	Square	-	-	High-speed steel	-	-

  From: ₹ 6,363.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular

  MISUMI

  [Features]
  ·High speed steel powder roughing regular flute length 4-flute type that can expect for durability
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	12 ～ 68	6 ～ 25	4	55 ～ 144	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,135.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular

  MISUMI

  [Features]
  ·High speed steel powder roughing long flute length 4-flute type that can expect for durability
  ·Suitable for deep cavity milling
  ·Coating with excellent lubricity is effective for wet machining and machining at cutting speeds of 40 m/min or less
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	15 ～ 90	6 ～ 25	4	60 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	TiCN	Square	Standard torsion (30-40°)	Available	Powder high-speed steel	-	-

  From: ₹ 1,135.56
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model

  MISUMI

  [Features]
  ·High-speed steel uncoated square short flute length 2-flute type with up to ø50
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 50	2.5 ～ 75	6 ～ 42	2	45 ～ 165	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 718.80
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model

  MISUMI

  [Features]
  ·Uncoated 4-flute regular blade length type
  ·Effective for side milling with 40° helix angle, which is stronger than standard helix angle
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 30	12 ～ 68	6 ～ 25	4	55 ～ 144	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Countersinking	Non-Coated	Square	Standard torsion (30-40°)	Available	Cobalt HSS	-	-

  From: ₹ 921.27
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GHKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	6 ～ 20	6 ～ 20	2	50 ～ 85	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: ₹ 2,329.18
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G 2-Flute End Mill for Key Groove GLKEY

  NACHI(FUJIKOSHI)

  End mill for key groove machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 16	10 ～ 18	8 ～ 16	2	60 ～ 80	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	-

  From: ₹ 2,343.91
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Standard End Mill, 3-Flute 3GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	6 ～ 65	6 ～ 32	3	50 ～ 150	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 2,492.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  G Long End Mill, 4-Flute SL4GE

  NACHI(FUJIKOSHI)

  General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 40	15 ～ 125	6 ～ 32	4	60 ～ 210	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	TiN	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	-

  From: ₹ 2,891.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  For 2-Flute Keyway EKD (OH1)

  OSG

  General-purpose 2-flute keyway end mill with a cutting diameter tolerance of 0 to +0.02.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 25	5 ～ 25	6 ～ 25	2	50 ～ 95	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Weak torsion (15 to 25˚)	-	Cobalt HSS	-	Straight

  From: ₹ 1,887.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-flute, General-purpose, Long Type EDL

  OSG

  General-purpose 2-flute end mill long type using cobalt high-speed steel as the base material. Suitable for deep cuts.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  0.8 ～ 40	6 ～ 110	6 ～ 32	2	50 ～ 195	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 2,050.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XPM End Mill (2-Flute Medium Type) XPM-EDN

  OSG

  2-flute end mill medium type using powder metal high-speed steel XPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1 ～ 20	3.5 ～ 45	6 ～ 20	2	55 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Powder high-speed steel	-	Straight

  From: ₹ 2,672.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, XPM End Mill (high-helix short type) TIN-XPM-EHS

  OSG

  TiN coating, 50° torsion, short-size end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	15 ～ 55	8 ～ 32	3 ～ 4	65 ～ 150	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiN	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,318.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL

  OSG

  TiN coating, 50° torsion, long-size end mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  6 ～ 30	25 ～ 105	8 ～ 32	3 ～ 4	75 ～ 200	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	TiN	Square	Powerful Torsion (45°-60°)	-	Powder high-speed steel	-	Straight

  From: ₹ 5,639.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill (2-Flute Short Type for Aluminum) AL-EDS

  OSG

  2-flute end mill short type for aluminum alloys using cobalt high-speed steel as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  1.5 ～ 30	4 ～ 55	6 ～ 25	2	45 ～ 125	Aluminum[◎] / Copper[○] / Resin[○]	Plane / Side / Groove / Inclined Cuts	Non-Coated	Square	Standard torsion (30-40°)	-	Cobalt HSS	-	Straight

  From: ₹ 1,867.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS

  OSG

  V coating applied 2-flute short type end mill for counterbore milling using powder metal high-speed steel CPM as the base material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Machining Application	Coating	Blade shape type	Torsion Angle (θ)	Base Blade Y/N	Tool Material Type	Underneck length (ℓ1)(mm)	shank
  3 ～ 20	8 ～ 38	6 ～ 20	2	50 ～ 125	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	Plane / Side / Groove / Inclined Cuts	-	Square	Weak torsion (15 to 25˚)	-	Powder high-speed steel	-	Straight

  From: ₹ 4,173.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Machining Application
Coating
Blade shape type
Torsion Angle (θ)
Base Blade Y/N
Tool Material Type
Underneck length (ℓ1)(mm)
shank

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	FUKUDA	OSG	OSG	OSG	OSG	SANKO MFG	OSG	OSG	OSG	OSG	OSG	FUKUDA	SANKO MFG	OSG	OSG	OSG	OSG	OSG	FUKUDA	FUKUDA	MISUMI	MISUMI	OSG	OSG	OSG	FUKUDA	FUKUDA	SANKO MFG	ASAHI TOOLS	TAIYO-TOOL	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	End Mill For Keyway (Negative Tolerance)	2-flute, General-purpose, Short Type EDS	Short Type, 4-Flute Multi-Flute Center Cut CC-EMS	2-flute Short Type EX-TIN-EDS	XPM End Mill (2-Flute Short Type) XPM-EDS	VS2T, 2-Flute Short Blade	2-flute Long Type EX-TIN-EDL	V Coating XPM Slim Shank End Mill (2-flute medium type) V-SS-XPM-EDN	End Mill (3-Flute General Purpose Short Type) ETS	XPM End Mill (Multi-Flute Short Type) XPM-EMS	XPM High Helix Long Type V-XPM-EHL	Special Long Shank End Mill, 4-Flute	SL Slotting Regular Flute	2-flute Medium Type EX-TIN-EDN	4-flute Long Type EX-TIN-EML	V Coating XPM End Mill (for 2-blade key groove) V-XPM-EKD(OH1)	V Coating XPM End Mill (4-flute short type) V-XPM-EMS	XPM End Mill (4-Flute Deep-Engraving Short Type) DE-XPM-EMS	3S End Mill, 2-Flute (Standard Blade)	3S End Mill, 4-Flute Long Blade	Powdered High-Speed Steel Square End Mill, 2-Flute / Regular / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Long / Non-Coated Model	2-flute, General-purpose, Medium Type EDN	V Coating XPM End Mill (2-flute short type) V-XPM-EDS	TiN Coating, End Mill (multi-flute short type) EX-TIN-EMS	3S End Mill, 2-Flute Long Blade	3S End Mill, 2-Flute Extra Long Blade	SS4T S Coating STEC 4-Flute Short	HSP Long High Spiral End Mill G2	MT Pattern 2 Flute End Mill SLE-MT (SKH51)	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute, Regular	TiCN Coated Powdered High-Speed Steel Square End Mill, 4-Flute / Regular	High-Speed Steel Square End Mill, 2-Flute / Short / Non-Coated Model	High-Speed Steel Square End Mill, 4-Flute, Regular / Non-Coated Model	G 2-Flute End Mill for Key Groove GHKEY	G 2-Flute End Mill for Key Groove GLKEY	G Standard End Mill, 3-Flute 3GE	G Long End Mill, 4-Flute SL4GE	For 2-Flute Keyway EKD (OH1)	2-flute, General-purpose, Long Type EDL	XPM End Mill (2-Flute Medium Type) XPM-EDN	TiN Coating, XPM End Mill (high-helix short type) TIN-XPM-EHS	TiN Coating, XPM End Mill (high-helix long type) TIN-XPM-EHL	End Mill (2-Flute Short Type for Aluminum) AL-EDS	V Coating XPM End Mill (for 2-flute countersinking) VP-ZDS
From	₹ 2,682.35	₹ 1,748.25	₹ 1,917.02	₹ 2,342.95	₹ 2,533.15	₹ 1,566.11	₹ 3,078.27	₹ 3,971.65	₹ 2,059.00	₹ 2,770.22	₹ 5,639.20	₹ 4,312.15	₹ 1,649.15	₹ 2,973.80	₹ 3,334.11	₹ 4,208.73	₹ 3,675.65	₹ 3,691.73	₹ 2,020.69	₹ 2,682.35	₹ 1,193.16	₹ 1,029.76	₹ 1,824.60	₹ 3,362.24	₹ 2,580.02	₹ 2,417.15	₹ 2,518.95	₹ 3,164.00	₹ 13,463.95	₹ 6,363.44	₹ 1,135.56	₹ 1,135.56	₹ 718.80	₹ 921.27	₹ 2,329.18	₹ 2,343.91	₹ 2,492.16	₹ 2,891.84	₹ 1,887.56	₹ 2,050.96	₹ 2,672.44	₹ 4,318.56	₹ 5,639.20	₹ 1,867.47	₹ 4,173.91
Days to Ship	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications
Blade diameter (D)(φ)	3 ～ 30	0.45 ～ 60	2.5 ～ 40	0.8 ～ 50	0.8 ～ 40	1 ～ 60	1 ～ 40	6 ～ 25	1 ～ 30	2 ～ 40	6 ～ 30	8 ～ 50	2 ～ 49	1 ～ 20	3 ～ 40	3 ～ 12	2.5 ～ 40	8 ～ 50	0.8 ～ 100	3 ～ 50	1 ～ 25	3 ～ 40	1 ～ 20	1 ～ 40	2.5 ～ 50	3 ～ 50	0.8 ～ 60	3 ～ 40	10 ～ 60	1/2 ～ 51	3 ～ 25	3 ～ 25	1 ～ 50	3 ～ 30	3 ～ 20	6 ～ 16	3 ～ 40	3 ～ 40	3 ～ 25	0.8 ～ 40	1 ～ 20	6 ～ 30	6 ～ 30	1.5 ～ 30	3 ～ 20
Blade length (ℓ)(mm)	5 ～ 30	1.1 ～ 80	10 ～ 65	1.6 ～ 75	2 ～ 65	2 ～ 85	6 ～ 110	15 ～ 50	2.5 ～ 55	8 ～ 65	25 ～ 105	20 ～ 75	10 ～ 60	3.5 ～ 45	15 ～ 110	5 ～ 15	10 ～ 65	20 ～ 75	2 ～ 80	20 ～ 125	3.5 ～ 60	15 ～ 110	3.5 ～ 45	2.5 ～ 65	7 ～ 75	15 ～ 120	2.5 ～ 300	10 ～ 65	10 ～ 200	30 ～ 65	12 ～ 68	15 ～ 90	2.5 ～ 75	12 ～ 68	6 ～ 20	10 ～ 18	6 ～ 65	15 ～ 125	5 ～ 25	6 ～ 110	3.5 ～ 45	15 ～ 55	25 ～ 105	4 ～ 55	8 ～ 38
Shank diameter (d)(mm)	6 ～ 25	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 32	6 ～ 42	6 ～ 32	5 ～ 24	6 ～ 25	6 ～ 32	8 ～ 32	6 ～ 42	6 ～ 32	6 ～ 20	6 ～ 32	6 ～ 12	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 25	6 ～ 32	6 ～ 20	6 ～ 32	6 ～ 42	6 ～ 42	6 ～ 42	6 ～ 32	10 ～ 42	-	6 ～ 25	6 ～ 25	6 ～ 42	6 ～ 25	6 ～ 20	8 ～ 16	6 ～ 32	6 ～ 32	6 ～ 25	6 ～ 32	6 ～ 20	8 ～ 32	8 ～ 32	6 ～ 25	6 ～ 20
Number of flutes(sheet)	2	2	4	2	2	2	2	2	3	4	3 ～ 4	4	2	2	4	2	4	4	2	4	2	4	2	2	4 ～ 6	2	2	4	4 ～ 6	2	4	4	2	4	2	2	3	4	2	2	2	3 ～ 4	3 ～ 4	2	2
Overall Length (L)(mm)	50 ～ 100	45 ～ 170	50 ～ 150	45 ～ 165	50 ～ 165	50 ～ 185	50 ～ 195	85 ～ 160	45 ～ 125	55 ～ 165	75 ～ 200	100 ～ 350	60 ～ 170	45 ～ 110	60 ～ 195	50 ～ 70	55 ～ 165	80 ～ 350	42 ～ 180	58 ～ 220	45 ～ 130	60 ～ 195	45 ～ 110	50 ～ 165	50 ～ 165	53 ～ 215	42 ～ 400	50 ～ 150	90 ～ 280	119 ～ 235.5	55 ～ 144	60 ～ 160	45 ～ 165	55 ～ 144	50 ～ 85	60 ～ 80	50 ～ 150	60 ～ 210	50 ～ 95	50 ～ 195	55 ～ 125	65 ～ 150	75 ～ 200	45 ～ 125	50 ～ 125
work material	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	Cast Iron[○] / Aluminum[○] / Resin[○] / Other[○] / Other 2[○] / Other 3[○] / Other 4[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○]	-	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	general steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]
Machining Application	Other	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Plunging (Z feed)	Plane / Side / Groove / Inclined Cuts	Side / Groove	-	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts
Coating	Non-Coated	Non-Coated	Non-Coated	TiN	Non-Coated	Non-Coated	TiN	-	Non-Coated	Non-Coated	-	Non-Coated	Non-Coated	TiN	TiN	-	-	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	TiN	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	TiCN	TiCN	Non-Coated	Non-Coated	TiN	TiN	TiN	TiN	Non-Coated	Non-Coated	Non-Coated	TiN	TiN	Non-Coated	-
Blade shape type	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square	Square
Torsion Angle (θ)	Other	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	-	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)
Base Blade Y/N	Available	-	-	-	-	Available	-	-	-	-	-	Available	Available	-	-	-	-	-	Available	Available	Available	Available	-	-	-	Available	Available	Available	Available	-	Available	Available	Available	Available	-	-	-	-	-	-	-	-	-	-	-
Tool Material Type	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Alloy HSS	Alloy HSS	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Cobalt HSS	Alloy HSS	Alloy HSS	Powder high-speed steel	Alloy HSS	High-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Cobalt HSS	Powder high-speed steel	Powder high-speed steel	Powder high-speed steel	Cobalt HSS	Powder high-speed steel
Underneck length (ℓ1)(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
shank	-	Straight	Straight	Straight	Straight	-	Straight	Straight	Straight	Straight	Straight	-	-	Straight	Straight	Straight	Straight	Straight	-	-	-	-	Straight	Straight	Straight	-	-	-	-	-	-	-	-	-	-	-	-	-	Straight	Straight	Straight	Straight	Straight	Straight	Straight

Loading...