Carbide Radius End Mills（Machining Application：Curved surface）

• You can add up to 6 items per a category to the compare list. Compare

  

  Power Radius End Mill MSXH440R

  NS TOOL

  Adopts powered-up unequal leads and large unequal divisions to suppress chatter and realize stable machining

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 12	0.3 ～ 3	8 ～ 26	4	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	6 ～ 12	-	Curved surface	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	-

  From: ₹ 4,579.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X

  7 LEADERS

  [Features]
  · Also use the 4-flute short radius end mill to prevent tip chipping.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	4 ～ 20	-	Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·High rigidity and cutting sharpness are achieved through combination of negative blade radius, appropriate core diameter, and 45° helix angle, enabling high-efficiency machining with high feed
  ·Versatile type that can be used for engraving, side surfaces, coarse, and middle finish
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 20	0.5 ～ 3	4 ～ 40	4	50 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	4 ～ 20	-	Curved surface	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	±0.015

  From: ₹ 4,792.00
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 4-flute, 45° torsion / regular model

  MISUMI

  4-Flute Radius for High-Efficiency and High-Speed Machining

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.2 ～ 2	18 ～ 38	4	60 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Curved surface	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02 ～ 10

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 2-flute / short model

  MISUMI

  [Features]
  ·Short flute length type with cutting edge radius attached to general purpose 2-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 3	2 ～ 40	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 20	17 ～ 45	Curved surface	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys

  OSG

  High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  12	1	18	3	90	Aluminum[◎] / Copper[◎] / Resin[○]	12	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 20,195.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS4000 HM Coated 4-Flute Long Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Rigidity-oriented blade shape provides long life even when machining high hardness materials
  · Capable of stable machining for both dry and wet type
  · New HARDMAX coating adopted to improve oxidation resistance.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.8 ～ 6	0.05 ～ 1	0.48 ～ 4.8	4	50 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○]	4 ～ 6	2 ～ 48	Curved surface	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 3,577.87
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Flute Corner Radius Medium End Mill 30° B257X

  7 LEADERS

  [Features]
  · Also use the 2-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	2	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45°, regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 56	4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Regular flute length type with cutting edge radius attached to general-purpose 4-flute end mill
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 36	4	45 ～ 85	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	4 ～ 12	23 ～ 55	Curved surface	For High Hardness (Silicon Group)	radius	Standard torsion (30-40°)	±0.01 ～ ±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

  MISUMI

  [Features]
  ·Suppresses chattering with unequal lead and unequal flutes
  ·Stable machining is possible while maintaining finished surface accuracy
  ·Cutting edge radius also reinforced cutting edge rigid
  ·Can process heat-treated steel up to 50HRC
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1.5 ～ 12	0.2 ～ 3	4 ～ 30	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 12	-	Curved surface	-	radius	-	-

  From: ₹ 2,749.36
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coated 4-Flute Short Shank Radius

  UNION TOOL

  [Features]
  · Unique corner rounding creates larger cutting depth and pick feed than with a ball
  · The seamless corner radius shape reduces cutting resistance and chattering
  · High hardness materials up to 65 HRC can also be machined

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 4	2 ～ 12	4	45 ～ 75	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	3 ～ 12	6 ～ 36	Curved surface	-	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,495.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  NSR-2 radius end mill

  NS TOOL

  Straight and corner rounding processing can be performed at the same time. Outstanding corner radius precision

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	0.2 ～ 2	3 ～ 18	2	45 ～ 60	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	4 ～ 6	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	0.02～-0.02

  From: ₹ 6,220.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSR-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 6	-	3 ～ 13	2	40 ～ 50	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,116.45
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work Materials: Aluminum [◎], Copper [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 16	-	4.5 ～ 24	3	60 ～ 120	Aluminum[◎] / Copper[◎]	6 ～ 16	-	Curved surface	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 6,524.16
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X

  7 LEADERS

  [Features]
  · Also use the 4-flute medium shank radius end mill to prevent tip chipping.
  · Enables radius cutting deep into the work materials.
  · Nanoparticle multilayer coating.
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.
  · It supports high-speed side cutting.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 4	10 ～ 55	4	50 ～ 160	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	3 ～ 20	-	Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAL series carbide radius end mill, 3-flute, 45° torsion / regular model

  MISUMI

  3-flute 45° helix radius that's resistant to chattering is available at an affordable price

  • Volume Discount

  • XAL
  • General Steel
  • 3 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0 ～ 16	0.2 ～ 2	16 ～ 48	3	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 16	-	Curved surface	For General Steels (AlCrN, etc.)	radius	Powerful Torsion (45°-60°)	±0.02

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  (Economy series) XAL series carbide radius end mill, 4-flute / short model

  MISUMI

  The 4-flute type that simultaneously achieves improved efficiency and tool cost reduction can be selected from 17 sizes

  • XAL
  • General Steel
  • 4 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.1 ～ 3	8 ～ 38	4	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 20	-	Curved surface	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,736.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius

  OSG

  Pencil neck radius end mill that achieves high-efficiency machining of deep parts that are prone to chattering and difficult-to-cut materials.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.5 ～ 2	3 ～ 18	3	60 ～ 220	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6 ～ 20	10 ～ 160.8	Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 11,069.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius

  UNION TOOL

  [Features]
  · Long neck radius shape that exhibits power in high-performance and high-quality machining
  · Capable of cutting everything from raw materials to high-hardness materials
  · Capable of stable, long-life machining for both dry and wet type

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 6	0.05 ～ 1	0.2 ～ 6	2	50 ～ 100	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎]	4 ～ 6	0.5 ～ 30	Curved surface	For High Hardness (Silicon Group)	Long-Neck Radius	Standard torsion (30-40°)	-

  From: ₹ 3,338.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MHDH645R 6-Flute Radius-End Mill for High-Hardness

  NS TOOL

  Achieves stable long life in extended periods of machining in high-hardness range (48-65 HRC)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  5 ～ 12	0.2 ～ 2	10 ～ 24	6	60 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	6 ～ 12	-	Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	0.01～-0.01

  From: ₹ 9,353.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  (Economy series) XAL series carbide radius end mill, 2-flute / short model

  MISUMI

  Radius end mills are available at low prices

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 12	0.1 ～ 3	3 ～ 30	2	50 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	4 ～ 12	-	Curved surface	For General Steels (AlCrN, etc.)	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 1,336.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 3-flute, 45° spiral / regular model

  MISUMI

  [Features]
  ·Radius type of multi-function end mill
  ·By adopting 3-flute shape, it is resistant to chattering, and can perform from plunging to grooving without steps
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 2	5 ～ 56	3	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	26 ～ 92	Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide radius end mill, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Multi-function end mill radius type.
  ·Unique chip gullet shape enables groove cutting with depth of cut equivalent to that of 2 flutes
  ·Compared to 30° helix angle square end mills, both rotation and feed are more than twice as fast
  ·Radius cutting edge is also effective in suppressing chipping
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.2 ～ 3	5 ～ 38	4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	6 ～ 20	18 ～ 73	Curved surface	For High Hardness (Silicon Group)	radius	Powerful Torsion (45°-60°)	±0.01

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

  MISUMI

  The diamond coated radius shape that's ideal for shaping graphite

  • DIA
  • Graphite
  • 4 Flutes
  • Long

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.5 ～ 3	30 ～ 60	4	150 ～ 200	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	6 ～ 12	60 ～ 85	Curved surface	Dia Coat	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 15,280.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

  MISUMI

  Small radius type that prevents cutter marks on resin

  • Non-Coated
  • Resin
  • 2 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 10	0.2	3 ～ 30	2	50 ～ 80	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	3 ～ 10	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	±0.02

  From: ₹ 2,434.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

  MISUMI

  Introducing the long-awaited unequal lead 4-flute radius end mill in the TSC series (helix angle of 40° / 43°)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 25	0.2 ～ 6.5	4 ～ 50	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	6 ～ 25	-	Curved surface	For High Hardness (Silicon Group)	radius	Other	±0.02

  From: ₹ 2,648.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  3 Flutes Short for Copper & Aluminum Alloys

  OSG

  Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.3 ～ 2	13 ～ 26	3	50 ～ 75	Aluminum[◎] / Copper[◎] / Resin[○]	6 ～ 12	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 7,561.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose

  OSG

  Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 5	0.3 ～ 1	2 ～ 10	3	60 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	6	4 ～ 15	Curved surface	TiAlN	radius	Powerful Torsion (45°-60°)	-

  From: ₹ 18,126.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation

  OSG

  Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	4.5 ～ 30	3	50 ～ 125	Aluminum[◎] / Copper[○] / Resin[◎]	6 ～ 20	-	Curved surface	DLC	radius	Standard torsion (30-40°)	-

  From: ₹ 8,833.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HRRS, HM Coat, 4-Flute Radius

  UNION TOOL

  [Features]
  · Higher speed and higher precision machining enabled by shortening the total length and reducing the protruding part of the tool
  · The optimized corner radius size enables processing with larger feed than conventional
  · Seamless Corner Radius Shape
  · High hardness materials up to 65 HRC can also be machined

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 4	2 ～ 12	4	70 ～ 120	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	3 ～ 12	6 ～ 36	Curved surface	For High Hardness (Silicon Group)	Long-Neck Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,881.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRRS UT Coat 4-Flute Radius

  UNION TOOL

  [Features]
  · Suitable for everything from raw materials to 55 HRC, the UTCOAT provides a long life
  · Variable split, high torsion and positive rake angle design enables stable machining
  · A blade design that reduces the cutting resistance in helical and inclined use, etc.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  2 ～ 12	0.3 ～ 2	2 ～ 12	4	60 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	4 ～ 12	6 ～ 36	Curved surface	-	Long-Neck Radius	-	-

  From: ₹ 4,977.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSR200 CBN Super Speed Radius End Mill

  NS TOOL

  Achieves high-efficiency machining of corner radius due to outstanding CBN durability

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.2 ～ 2	0.02 ～ 0.5	0.08 ～ 1.2	2	48 ～ 53	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	0.5 ～ 10	Curved surface	Non-Coated	radius	No torsion	0.005～-0.005

  From: ₹ 12,716.55
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSRS430 MUGEN-COATING 4-Flute Radius End Mill

  NS TOOL

  Straight and corner rounding processing can be performed at the same time.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  6 ～ 12	0.1 ～ 3	12 ～ 24	4	80 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	6 ～ 12	-	Curved surface	TiAlN	radius	Standard torsion (30-40°)	0.01～-0.01

  From: ₹ 9,353.33
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Super Radius End Mill DV-OCSRLN

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 16	1 ～ 3	6 ～ 24	3	80 ～ 185	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	4 ～ 16	20 ～ 120	Curved surface	-	Long-Neck Radius	Powerful Torsion (45°-60°)	0.015～-0.015

  From: ₹ 12,649.58
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type

  DIJET

  [Features]
  · Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  3 ～ 20	0.5 ～ 3	8 ～ 38	4	60 ～ 125	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	6 ～ 20	10 ～ 15	Curved surface	-	radius	Powerful Torsion (45°-60°)	0.02～-0.02

  From: ₹ 11,162.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Corner Radius End Mill SBRE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 6	-	0.3 ～ 2	2	50 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	6	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 16,655.33
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 3-Flute Corner Radius End Mill SBREF-3

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  High-efficiency machining is possible with high feed.
  Machining applications (machining shape): flat surface / side surface / curved surface / groove / slanted cut

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  0.3 ～ 2	-	0.5 ～ 1.5	3	50	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	4	-	Curved surface	Non-Coated	High-Feed Radius	Standard torsion (30-40°)	-

  From: ₹ 18,766.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill with 2 Carbide Flutes and Corner Radius KSER-2

  KYOWA SEIKO

  [Applications]It can be used for flat surface machining, side machining, curved surface machining, grooving, and inclined cutting. [Features]Using carbide materials with high hardness, it is possible to cut general steel, heat-treated steel, stainless steel and cast iron.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 4	-	1 ～ 40	2	50 ～ 80	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	4 ～ 6	-	Curved surface	Non-Coated	radius	Standard torsion (30-40°)	-

  From: ₹ 5,680.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC

  KYOWA SEIKO

  [Specifications]
  · Shape: Radius End Mill (carbide)
  · Material: Super Micro Grain Alloy
  · Work materials: General steel [◎] / tempered steel [○] / stainless steel [◎] / cast iron [◎]
  [Applications] Flat Surfaces / Side Surfaces / Curved Surfaces / Grooves / Inclined Cutting

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  8 ～ 16	-	12 ～ 24	3	100 ～ 160	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	6 ～ 14	-	Curved surface	DLC	-	Powerful Torsion (45°-60°)	-

  From: ₹ 10,605.29
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X

  7 LEADERS

  [Features]
  · Also use the 2-flute short radius end mill to prevent tip chipping.
  · Nanoparticle Multilayer Coating
  · Excellent lubricity and abrasion resistance.
  · Exhibits its strength in general cutting processes.

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  1 ～ 20	0.1 ～ 4	3 ～ 38	2	50 ～ 100	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	4 ～ 20	-	Curved surface	-	radius	Standard torsion (30-40°)	0～-20

  From: ₹ 2,426.95
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type

  MISUMI

  Achieves high efficiency machining using the high feed. The 3-flute structure suppresses the occurrence of chattering

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	50 ～ 100	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	-	Curved surface	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 8,543.31
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 20	0.813 ～ 2.607	8 ～ 40	4	50 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 20	-	Curved surface	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 6,160.53
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	3	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Curved surface	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 4,968.22
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model

  MISUMI

  [Features]
  ·Combined corner radius shape of shoulder R and bottom R, (1) Cutting chips are thin when milling bottom surface, enabling high-speed feed (2) Minimizing cusp height (uncut portion) during contour milling reduces number of middle finish processes
  ·Long neck type that avoids tool interference achieves high efficiency even in deep cavity milling

  • TS
  • High-Hardness Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	R Size(mm)	Blade length (ℓ)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Shank diameter (d)(mm)	Underneck length (ℓ1)(mm)	Machining Application	Coating	Type	Torsion Angle (θ)	R Precision(μm)
  4 ～ 12	0.813 ～ 2.438	8 ～ 24	4	80 ～ 160	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	6 ～ 12	35 ～ 108	Curved surface	For High Hardness (Silicon Group)	High-Feed Radius	Powerful Torsion (45°-60°)	-

  From: ₹ 5,153.05
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
R Size(mm)
Blade length (ℓ)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Type
Torsion Angle (θ)
R Precision(μm)

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NS TOOL	7 LEADERS	MISUMI	MISUMI	MISUMI	OSG	UNION TOOL	7 LEADERS	MISUMI	MISUMI	MISUMI	UNION TOOL	NS TOOL	KYOWA SEIKO	KYOWA SEIKO	7 LEADERS	MISUMI	MISUMI	OSG	UNION TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	DIJET	DIJET	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	KYOWA SEIKO	7 LEADERS	MISUMI	MISUMI	MISUMI	MISUMI
Product Series	Power Radius End Mill MSXH440R	Carbide 4-Flute Variable Split Corner Radius Short End Mill 30° B256X	TSC series carbide radius end mill, high-feed, high-rigidity, 4-flute, 45° spiral / short model	XAL series carbide radius end mill, 4-flute, 45° torsion / regular model	TSC series carbide radius end mill, 2-flute / short model	Regular Grain Carbide End Mills 3 Flutes Pocket operation for Copper and Aluminum Alloys	HLRS4000 HM Coated 4-Flute Long Neck Radius	Carbide 2-Flute Corner Radius Medium End Mill 30° B257X	TSC series carbide radius end mill, 4-flute, 45°, regular model	TSC series carbide radius end mill, 4-flute / regular model	VAC Series Carbide 4-Flute Uneven Lead Radius End Mill	HRRS, HM Coated 4-Flute Short Shank Radius	NSR-2 radius end mill	End Mill with 2 Carbide Flutes and Corner Radius KSR-2	Endmill with 3 Carbide Flutes and Corner Radius for Aluminum Alloys Strong Type ALERT-3DLC	Carbide 4-Flute Variable Split Corner Radius Medium End Mill 30° B258X	XAL series carbide radius end mill, 3-flute, 45° torsion / regular model	(Economy series) XAL series carbide radius end mill, 4-flute / short model	Micro Grain Carbide End Mills PHOENIX Pencil Neck Deep-Feed Radius	HLRS2000E High Accuracy Type, High R Precision Long-Neck Radius	MHDH645R 6-Flute Radius-End Mill for High-Hardness	(Economy series) XAL series carbide radius end mill, 2-flute / short model	TSC series carbide radius end mill, 3-flute, 45° spiral / regular model	TSC series carbide radius end mill, 4-flute, 45° spiral / short model	Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model	Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model	TSC Series Carbide Uneven Lead 4-Flute Radius End Mill	3 Flutes Short for Copper & Aluminum Alloys	Micro Grain Carbide End Mills PHOENIX High-Feed Bull Nose	Carbide End Mills DLC Coated 4 Flutes for High Speed Pocket Operation	HRRS, HM Coat, 4-Flute Radius	CRRS UT Coat 4-Flute Radius	SSR200 CBN Super Speed Radius End Mill	MSRS430 MUGEN-COATING 4-Flute Radius End Mill	One Cut Super Radius End Mill DV-OCSRLN	One-Cut Radius End Mill for Heat Resistant Alloy DV-OCSAR Type	CBN 2-Flute Corner Radius End Mill SBRE-2	CBN 3-Flute Corner Radius End Mill SBREF-3	End Mill with 2 Carbide Flutes and Corner Radius KSER-2	Endmill with 3 Carbide Flutes for Aluminum Alloys for Use with Vertical Walls ALRE-3DLC	Carbide 2-Piece Flute Corner Radius Short End Mill 30° B255X	TSC Series Carbide Compound Radius End Mill for High-Speed Feed Machining/3-Flute/45° Spiral/Short Type	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / short model	TSC Series Carbide Compound Radius For High-Speed Feed Machining / 3-Flute / 45° Spiral / Long Shank / Short	TSC series carbide composite radius end mill, for high-feed machining, 4-flute, 45° spiral / long shank, short model
From	₹ 4,579.73	₹ 2,426.95	₹ 4,792.00			₹ 20,195.73	₹ 3,577.87	₹ 2,426.95			₹ 2,749.36	₹ 4,495.36	₹ 6,220.47	₹ 5,116.45	₹ 6,524.16	₹ 2,426.95		₹ 1,736.00	₹ 11,069.11	₹ 3,338.11	₹ 9,353.33	₹ 1,336.00			₹ 15,280.00	₹ 2,434.20	₹ 2,648.31	₹ 7,561.24	₹ 18,126.36	₹ 8,833.65	₹ 4,881.11	₹ 4,977.55	₹ 12,716.55	₹ 9,353.33	₹ 12,649.58	₹ 11,162.85	₹ 16,655.33	₹ 18,766.22	₹ 5,680.35	₹ 10,605.29	₹ 2,426.95	₹ 8,543.31	₹ 6,160.53	₹ 4,968.22	₹ 5,153.05
Days to Ship	5 Day(s) or more	5 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more
Specifications			TS High-Hardness Steel 4 Flutes S (Short)	XAL General Steel 4 Flutes	TS General Steel 2 Flutes S (Short)				TS General Steel 4 Flutes R (Regular)	TS General Steel 4 Flutes R (Regular)							XAL General Steel 3 Flutes	XAL General Steel 4 Flutes				XAL General Steel 2 Flutes	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	DIA Graphite 4 Flutes Long	Non-Coated Resin 2 Flutes R (Regular)																TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)	TS High-Hardness Steel 3 Flutes S (Short)	TS High-Hardness Steel 4 Flutes S (Short)
Blade diameter (D)(φ)	3 ～ 12	1 ～ 20	2 ～ 20	4 ～ 12	1 ～ 20	12	0.8 ～ 6	3 ～ 20	3 ～ 20	1 ～ 12	1.5 ～ 12	2 ～ 12	1 ～ 6	1 ～ 6	3 ～ 16	3 ～ 20	0 ～ 16	3 ～ 20	2 ～ 12	0.2 ～ 6	5 ～ 12	1 ～ 12	3 ～ 20	3 ～ 20	6 ～ 12	1 ～ 10	2 ～ 25	6 ～ 12	1 ～ 5	3 ～ 20	2 ～ 12	2 ～ 12	0.2 ～ 2	6 ～ 12	4 ～ 16	3 ～ 20	0.3 ～ 6	0.3 ～ 2	1 ～ 4	8 ～ 16	1 ～ 20	4 ～ 12	4 ～ 20	4 ～ 12	4 ～ 12
R Size(mm)	0.3 ～ 3	0.1 ～ 4	0.5 ～ 3	0.2 ～ 2	0.1 ～ 3	1	0.05 ～ 1	0.1 ～ 4	0.2 ～ 3	0.1 ～ 3	0.2 ～ 3	0.3 ～ 4	0.2 ～ 2	-	-	0.1 ～ 4	0.2 ～ 2	0.1 ～ 3	0.5 ～ 2	0.05 ～ 1	0.2 ～ 2	0.1 ～ 3	0.2 ～ 2	0.2 ～ 3	0.5 ～ 3	0.2	0.2 ～ 6.5	0.3 ～ 2	0.3 ～ 1	0.5 ～ 3	0.3 ～ 4	0.3 ～ 2	0.02 ～ 0.5	0.1 ～ 3	1 ～ 3	0.5 ～ 3	-	-	-	-	0.1 ～ 4	0.813 ～ 2.438	0.813 ～ 2.607	0.813 ～ 2.438	0.813 ～ 2.438
Blade length (ℓ)(mm)	8 ～ 26	3 ～ 38	4 ～ 40	18 ～ 38	2 ～ 40	18	0.48 ～ 4.8	10 ～ 55	5 ～ 56	3 ～ 36	4 ～ 30	2 ～ 12	3 ～ 18	3 ～ 13	4.5 ～ 24	10 ～ 55	16 ～ 48	8 ～ 38	3 ～ 18	0.2 ～ 6	10 ～ 24	3 ～ 30	5 ～ 56	5 ～ 38	30 ～ 60	3 ～ 30	4 ～ 50	13 ～ 26	2 ～ 10	4.5 ～ 30	2 ～ 12	2 ～ 12	0.08 ～ 1.2	12 ～ 24	6 ～ 24	8 ～ 38	0.3 ～ 2	0.5 ～ 1.5	1 ～ 40	12 ～ 24	3 ～ 38	8 ～ 24	8 ～ 40	8 ～ 24	8 ～ 24
Number of flutes(sheet)	4	4	4	4	2	3	4	2	4	4	4	4	2	2	3	4	3	4	3	2	6	2	3	4	4	2	4	3	3	3	4	4	2	4	3	4	2	3	2	3	2	3	4	3	4
Overall Length (L)(mm)	60 ～ 80	50 ～ 100	50 ～ 130	60 ～ 100	40 ～ 110	90	50 ～ 120	50 ～ 160	60 ～ 130	45 ～ 85	50 ～ 150	45 ～ 75	45 ～ 60	40 ～ 50	60 ～ 120	50 ～ 160	60 ～ 110	50 ～ 100	60 ～ 220	50 ～ 100	60 ～ 80	50 ～ 75	60 ～ 130	60 ～ 110	150 ～ 200	50 ～ 80	50 ～ 120	50 ～ 75	60 ～ 70	50 ～ 125	70 ～ 120	60 ～ 120	48 ～ 53	80 ～ 110	80 ～ 185	60 ～ 125	50 ～ 60	50	50 ～ 80	100 ～ 160	50 ～ 100	50 ～ 100	50 ～ 150	80 ～ 160	80 ～ 160
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	Aluminum[◎] / Copper[◎]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] / Graphite[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎] / Copper[○] / Resin[◎]	Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Cast Iron[○] / Aluminum[○] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Cast Iron[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[◎] / Titanium[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]
Shank diameter (d)(mm)	6 ～ 12	4 ～ 20	4 ～ 20	6 ～ 12	4 ～ 20	12	4 ～ 6	3 ～ 20	6 ～ 20	4 ～ 12	6 ～ 12	3 ～ 12	4 ～ 6	4 ～ 6	6 ～ 16	3 ～ 20	6 ～ 16	4 ～ 20	6 ～ 20	4 ～ 6	6 ～ 12	4 ～ 12	6 ～ 20	6 ～ 20	6 ～ 12	3 ～ 10	6 ～ 25	6 ～ 12	6	6 ～ 20	3 ～ 12	4 ～ 12	4	6 ～ 12	4 ～ 16	6 ～ 20	6	4	4 ～ 6	6 ～ 14	4 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 12
Underneck length (ℓ1)(mm)	-	-	-	-	17 ～ 45	-	2 ～ 48	-	26 ～ 92	23 ～ 55	-	6 ～ 36	-	-	-	-	-	-	10 ～ 160.8	0.5 ～ 30	-	-	26 ～ 92	18 ～ 73	60 ～ 85	-	-	-	4 ～ 15	-	6 ～ 36	6 ～ 36	0.5 ～ 10	-	20 ～ 120	10 ～ 15	-	-	-	-	-	-	-	35 ～ 108	35 ～ 108
Machining Application	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface	Curved surface
Coating	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	For High Hardness (Silicon Group)	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	Non-Coated	Non-Coated	DLC	-	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Dia Coat	Non-Coated	For High Hardness (Silicon Group)	Non-Coated	TiAlN	DLC	For High Hardness (Silicon Group)	-	Non-Coated	TiAlN	-	-	Non-Coated	Non-Coated	Non-Coated	DLC	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)
Type	radius	radius	High-Feed Radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	Long-Neck Radius	radius	radius	-	radius	radius	radius	radius	Long-Neck Radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	radius	Long-Neck Radius	Long-Neck Radius	radius	radius	Long-Neck Radius	radius	radius	High-Feed Radius	radius	-	radius	High-Feed Radius	High-Feed Radius	High-Feed Radius	High-Feed Radius
Torsion Angle (θ)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	-	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Other	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	-	No torsion	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)
R Precision(μm)	-	0～-20	±0.015	±0.02 ～ 10	±0.01 ～ ±0.02	-	-	0～-20	±0.01	±0.01 ～ ±0.02	-	-	0.02～-0.02	-	-	0～-20	±0.02	±0.02	-	-	0.01～-0.01	±0.02	±0.01	±0.01	±0.02	±0.02	±0.02	-	-	-	-	-	0.005～-0.005	0.01～-0.01	0.015～-0.015	0.02～-0.02	-	-	-	-	0～-20	-	-	-	-

Loading...