Long Neck Ball End Mills (Carbide)（Machining Application：R Groove）

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	4 ～ 6	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	±0.005	R Groove	MRC	Long-Neck Ball

  From: ₹ 1,171.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.005～0.005 ～ -0.002～0.002	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

  MISUMI

  [Features]
  ·High stiffness 2-flute type with length taper shape
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • Volume Discount

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.15 ～ 5	0.3 ～ 8	2 ～ 60	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 2,143.38
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	0.005～-0.005	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,182.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 2-flute / long neck model

  MISUMI

  [Features]
  ·Long neck shape suitable for deep cavity milling
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 8	0.2 ～ 60	3 ～ 8	2	40 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	R Groove	TiAlN	Long-Neck Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model

  MISUMI

  A significant number of specifications has been added to the XAL series that can be widely used for everything from general steel to copper

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	3 ～ 6	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: ₹ 1,028.98
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck for Copper Work, Ball CURIBR

  NACHI(FUJIKOSHI)

  Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 50	4 ～ 6	2	45 ～ 120	Aluminum[◎] / Copper[◎]	-0.007～+0.003	R Groove	CrN	Long-Neck Ball

  From: ₹ 3,792.93
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 4-Flute for Graphite DG-LN-EBM

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 1.5	3 ～ 4.5	10 ～ 20	4	4	50 ～ 60	Aluminum[◎] / Graphite[◎] / Resin[◎]	-0.015～+0.015	R Groove	DG	Long-Neck Ball

  From: ₹ 16,507.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Significantly enhances machining efficiency.
  · The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
  · With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
  · Reasonable price setting
  · Has 4 flutes but is still cheaper than 3-flute types from other companies

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 18	-	4 ～ 12	4	50 ～ 110	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.01～0.01 ～ -0.005～0.005	R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
  · The newly developed diamond coating film achieves outstanding wear resistance
  · Adopts a highly adhesive coating film for longer product life

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.32 ～ 6	2 ～ 80	4 ～ 6	2	45 ～ 120	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	R Groove	Dia Coat	Long-Neck Ball

  From: ₹ 6,426.76
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]

  UNION TOOL

  [Features]
  · An end mill dedicated for graphite machining.
  · Adopts a carbide base material with excellent wear resistance.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.8 ～ 55	-	4 ～ 12	2	60 ～ 200	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	R Groove	Non-Coated	Ball

  From: ₹ 5,461.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  UT Coat, 2-flute Ball CSEB

  UNION TOOL

  [Features]
  · With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.
  · New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.
  · Supports a wide range from copper and raw materials to 55 HRC.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.3 ～ 18	-	4 ～ 12	2	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	R Groove	TiCN	Ball

  From: ₹ 1,879.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 3-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 3-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	3 ～ 50	4 ～ 6	2 ～ 3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide long neck ball end mill, 4-flute / long neck model

  MISUMI

  [Features]
  ·Long neck ball 4-flute type suitable for high-feed machining of deep cutting areas
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	1.6 ～ 6	4 ～ 30	4 ～ 6	4	50 ～ 70	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute CRN-LN-EBD-4

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.16 ～ 1.6	1 ～ 30	4	2	45 ～ 70	Aluminum[○] / Copper[◎] / Resin[○]	-0.01～+0.01	R Groove	CrN	Long-Neck Ball

  From: ₹ 6,899.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated long neck ball. The effective length can be selected to suit the machining shape.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 40	4 ～ 6	2	45 ～ 90	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	-0.005～+0.005	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,079.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-LN-EBD

  OSG

  The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 6	0.3 ～ 50	3 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.005～+0.005	R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: ₹ 3,751.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WX-LN-EBD

  OSG

  A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.01～+0.01	R Groove	TiAlN	Long-Neck Ball

  From: ₹ 3,793.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute DIA-LN-EBD

  OSG

  Long neck shaped ball end mill with ultra-microcrystalline diamond coating. Excellent durability in graphite machining. Also effective for copper and aluminum alloys.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 2.5	1.5 ～ 7.5	5 ～ 50	6	2	60 ～ 100	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	-	R Groove	Dia Coat	Long-Neck Ball

  From: ₹ 23,883.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	-0.007～0.007 ～ -0.002～0.002	R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HTNB HM coat 2-flute taper neck ball end mill

  UNION TOOL

  [Features]
  · High rigidity realized through an improved taper neck shape.
  · Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity
  · 65 HRC high hardness materials can also be cut

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 50	1.5 ～ 62	4 ～ 6	2	4 ～ 120	general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎]	-0.005～0.005	R Groove	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	Tapered neck ball

  From: ₹ 3,800.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CPRB 2-Flute Long Neck Ball End Mill for Resin Machining

  UNION TOOL

  [Features]
  · Long Neck Ball End Mill for Resin Processing
  · Ideal for deep grooving thanks to the undercut processing of the neck part

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.4 ～ 6	1 ～ 50	4 ～ 6	2	45 ～ 120	Aluminum[○] / Copper[◎] / Resin[◎]	-0.01～0.01	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 3,103.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long-Neck Ball End Mill (for Deep Ribs) NHB-2

  NS TOOL

  Supports three-dimensional precision deep engraving. Neck relief type suitable to narrow deep processing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.6 ～ 6	6 ～ 50	4 ～ 6	2	45 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	0.01～-0.01	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 5,635.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

  MISUMI

  A lineup of 16 sizes centering on small diameter that employs a unique spherical cutting edge

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 5	-	4 ～ 55	6 ～ 10	2	70 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	±0.01	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball / Spherical Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

  MISUMI

  [Features]
  ·High-feed, high stiffness 3-flute taper shape with taper length
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 6	7 ～ 60	4 ～ 8	3	50 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	-0.007 ~ +0.003 ～ ±0.005	R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model

  MISUMI

  CrN coated products that are ideal for copper electrode processing are available at affordable prices

  • CrN
  • Copper
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.4 ～ 4	2 ～ 40	4 ～ 6	2	50 ～ 110	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	±0.005	R Groove	CrN	Long-Neck Ball

  From: ₹ 2,138.04
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)

  MISUMI

  Astonishingly inexpensive! Unprecedented price reduction on the premium diamond coated products!

  • DIA
  • Graphite
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 3	0.6 ～ 7.5	2 ～ 60	4 ～ 6	2	50 ～ 110	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	±0.01	R Groove	Dia Coat	Long-Neck Ball

  From: ₹ 4,674.82
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD

  OSG

  Also ideal for copper electrode machining that requires large protrusions as it has a short blade and long neck shape with high rigidity.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 2.5	1.5 ～ 7.5	3 ～ 40	6	2	60 ～ 90	Aluminum[○] / Copper[◎] / Resin[○]	-0.01～+0.01	R Groove	CrN	Long-Neck Ball

  From: ₹ 9,961.42
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD

  OSG

  End mill with diamond coating dedicated for graphite.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 2	0.6 ～ 6	4 ～ 60	4	2	50 ～ 100	Aluminum[○] / Graphite[◎] / Resin[◎]	-0.01～+0.01 ～ -0.008～+0.008	R Groove	DG	Long-Neck Ball

  From: ₹ 16,507.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute CBN-LN-SXB

  OSG

  2-Flute Long Neck Ball End Type CBN-LN-SXB
  ·Achieves deep cut milling even with small diameters. Good cutting quality.
  With the effect of spiral gash, both cutting edge strength and sharpness are achieved.
  ·CBN sintered body is used for the flute material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	2 ～ 15	4 ～ 6	2	45 ～ 50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.01～+0.01	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 16,879.40
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute DLC-LN-EBD

  OSG

  Ultra-smooth DLC coating prevents welding adhesion. Achieves high speed in shape machining of aluminum alloys, while also obtaining a smooth surface finish.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 2	1.5 ～ 6	5 ～ 20	6	2	60 ～ 80	Aluminum[◎] / Resin[◎]	-0.01～+0.01	R Groove	DLC	Long-Neck Ball

  From: ₹ 9,429.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD

  OSG

  WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1.5	0.5 ～ 2.4	1.5 ～ 12	4	2	35 ～ 40	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	-0.005～+0.005	R Groove	For General Steels (AlCrN, etc.)	Long-Neck Ball

  From: ₹ 2,184.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute FX-LN-EBD-6

  OSG

  Ball end mill long neck type for high-speed machining that fully draws out the performance of high-speed/high-precision machining centers.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.25 ～ 3	0.5 ～ 6	2.5 ～ 30	6	2	60 ～ 90	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	-0.005～+0.005	R Groove	TiAlN	Long-Neck Ball

  From: ₹ 12,129.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 0.75	0.3 ～ 2.5	-	4	2	50	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.005～0.005	R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,004.09
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HBL, HM Coated 2-Flute Long Shank Ball

  UNION TOOL

  [Features]
  · Long Shank Ball End Middle Series Supporting High-Hardness Materials
  · Uses HardMax coating compatible with high-speed machining of high-hardness materials
  · Capable of stable, long-life machining for both dry and wet type

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	4.5 ～ 25	-	3 ～ 12	2	80 ～ 200	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.007～0.007 ～ -0.005～0.005	R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 6,039.69
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HLB, HM Coat, 2-Flute Long Neck Ball End Mill

  UNION TOOL

  [Features]
  · Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity
  · Provides unprecedented long life and can be used for both dry and wet applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.4 ～ 3	0.64 ～ 4.8	3 ～ 30	4 ～ 6	2	45 ～ 80	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	-0.002～0.002	R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,945.16
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball

  UNION TOOL

  [Features]
  · Supports Shrink Fit Holders
  · Suppresses unnecessary tool protrusion to enable higher precision processing
  · Reduces processes in cutting
  · Increases machining efficiency through combination with shrink fit holder.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 18	-	4 ～ 12	4	40 ～ 60	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	-0.01～0.01 ～ -0.005～0.005	R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball

  UNION TOOL

  [Features]
  · 2-Flute Diamond-Coated Ball Series for Graphite Electrode Processing
  · The newly developed diamond coating film achieves outstanding wear resistance
  · Adopts a highly adhesive coating film for longer product life

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	5 ～ 55	-	4 ～ 12	2	60 ～ 180	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	R Groove	Dia Coat	Ball

  From: ₹ 7,874.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CGB4000 4-Flute Ball for Graphite Processing

  UNION TOOL

  [Features]
  · An end mill dedicated for graphite machining.
  · Adopts a carbide base material with excellent wear resistance.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 10	20 ～ 60	-	4 ～ 20	4	100 ～ 250	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	-0.01～0.01	R Groove	Non-Coated	Ball

  From: ₹ 10,870.85
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]

  UNION TOOL

  [Features]
  · 3-flute type achieves remarkably high feed. Shortens the roughing time
  · Deep cutting is possible, enabling high efficiency machining even with shape processing where feeding speed cannot be increased
  · Designed with 3-flute variable split to suppress chatter.
  · It uses UTCOAT and can support a wide range from raw materials through low/medium hardness materials up to 55 HRC
  · Provides excellent chip discharge performance and outstanding finished surface roughness with 3-groove tip shape (excluding R0.75 and below)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 6	0.9 ～ 18	-	4 ～ 12	3	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎]	-0.01～0.01 ～ -0.005～0.005	R Groove	TiCN	Ball

  From: ₹ 3,158.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSBL200 CBN Super Speed Long Neck Ball End Mill

  NS TOOL

  Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1	0.08 ～ 1.2	0.3 ～ 10	4	2	50 ～ 53	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	0.005～-0.005	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 16,016.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  RSB230 Ball-End Mill for Resin Clear Cut

  NS TOOL

  3x, 5x and 10x blade length, ultra long neck, same diameter type - selectable according to machining shape.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.6 ～ 30	2 ～ 80	3 ～ 6	2	50 ～ 130	Aluminum[◎] / Copper[◎] / Resin[◎]	0.005～-0.005 ～ 0.01～-0.01	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 2,676.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)

  NS TOOL

  [Features]
  2-flute long end mill.
  [Applications]
  Suitable for processing aluminum alloys, copper and resins.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	1.5 ～ 9	4 ～ 50	4 ～ 8	2	50 ～ 110	Aluminum[◎] / Copper[◎] / Resin[◎]	0.01～-0.01	R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 7,097.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	UNION TOOL	MISUMI	NS TOOL	MISUMI	NS TOOL	MISUMI	NACHI(FUJIKOSHI)	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	UNION TOOL	NS TOOL	NS TOOL	NS TOOL
Product Series	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	HM Coated 2-flute, Long Neck Ball HSLB	TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model	MRBH230 Long-Neck Ball, Hard (for High Hardness)	TSC series carbide long neck ball end mill, 2-flute / long neck model	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	XAL Series Carbide Long Neck Ball End Mill, 2-Flute / Stub, Long Neck Model	Long Neck for Copper Work, Ball CURIBR	Long Neck Ball Type, 4-Flute for Graphite DG-LN-EBM	HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]	DIA Coated Series, for Graphite Processing, DCLB, 2-Flute Long Neck Ball End Mill	CGB2000, for Graphite Processing, 2-Flute Ball [Alternation Supported Product]	UT Coat, 2-flute Ball CSEB	TSC series carbide long neck ball end mill, 3-flute / long neck model	TSC series carbide long neck ball end mill, 4-flute / long neck model	Long Neck Ball Type, 2-Flute CRN-LN-EBD-4	Long Neck Ball Type, 2-Flute for High Hardness WXS-LN-EBD	Long Neck Ball Type, 2-Flute WXL-LN-EBD	Long Neck Ball Type, 2-Flute WX-LN-EBD	Long Neck Ball Type, 2-Flute DIA-LN-EBD	HSB, HM Coated 2-Flute Ball	HTNB HM coat 2-flute taper neck ball end mill	CPRB 2-Flute Long Neck Ball End Mill for Resin Machining	Long-Neck Ball End Mill (for Deep Ribs) NHB-2	TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model	TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	CRN Coated Carbide Long Neck Ball End Mill for Copper Electrode Machining, 2-Flute / Stub, Long Neck Model	Diamond Coated Carbide Ball End Mill for Graphite Machining, 2-Flute / Stub, Long Neck Model (for Deep Ribbing)	Long Neck Ball Type, 2-Flute for Copper /Aluminum Alloy / Plastic CRN-LN-EBD	Long Neck Ball Type, 2-Flute for Graphite DG-LN-EBD	Long Neck Ball Type, 2-Flute CBN-LN-SXB	Long Neck Ball Type, 2-Flute DLC-LN-EBD	Long Neck Ball Type, 2-Flute WXL-HS-LN-EBD	Long Neck Ball Type, 2-Flute FX-LN-EBD-6	HB, HM Coated, 2-Flute Ball End Mill [Alteration Supported Product]	HBL, HM Coated 2-Flute Long Shank Ball	HLB, HM Coat, 2-Flute Long Neck Ball End Mill	HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball	DIA Coated Series, for Graphite Processing, DCB, 2-Flute Ball	CGB4000 4-Flute Ball for Graphite Processing	CFB, for Raw Wood to Machining, 3-Flute Ball [Alteration Supported Product]	SSBL200 CBN Super Speed Long Neck Ball End Mill	RSB230 Ball-End Mill for Resin Clear Cut	DHB Long Neck Ball End Mill for Copper Electrode / Aluminum / Plastic (for Deep Rib)
From	₹ 1,171.25	₹ 1,854.07	₹ 2,143.38	₹ 2,182.20		₹ 2,168.82	₹ 1,028.98	₹ 3,792.93	₹ 16,507.04	₹ 3,394.38	₹ 6,426.76	₹ 5,461.07	₹ 1,879.53			₹ 6,899.56	₹ 2,079.09	₹ 3,751.00	₹ 3,793.51	₹ 23,883.09	₹ 1,829.96	₹ 3,800.22	₹ 3,103.73	₹ 5,635.16			₹ 3,991.73	₹ 2,138.04	₹ 4,674.82	₹ 9,961.42	₹ 16,507.04	₹ 16,879.40	₹ 9,429.69	₹ 2,184.91	₹ 12,129.91	₹ 2,004.09	₹ 6,039.69	₹ 1,945.16	₹ 3,394.38	₹ 7,874.65	₹ 10,870.85	₹ 3,158.65	₹ 16,016.80	₹ 2,676.44	₹ 7,097.78
Days to Ship	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	MR General Steel 2 Flutes S (Short)		TS General Steel 2 Flutes		TS General Steel 2 Flutes		XAL General Steel 2 Flutes							TS General Steel 3 Flutes	TS General Steel 4 Flutes										TS General Steel 2 Flutes B (Stub)	TS General Steel 3 Flutes	TS High-Hardness Steel 3 Flutes	CrN Copper 2 Flutes	DIA Graphite 2 Flutes
R Size(mm)	0.05 ～ 3	0.05 ～ 3	0.15 ～ 5	0.05 ～ 3	0.05 ～ 3	0.05 ～ 3	0.05 ～ 3	0.1 ～ 3	1 ～ 1.5	1 ～ 6	0.2 ～ 3	0.2 ～ 6	0.1 ～ 6	0.5 ～ 3	1 ～ 3	0.1 ～ 1	0.1 ～ 3	0.05 ～ 3	0.1 ～ 3	0.5 ～ 2.5	0.03 ～ 6	0.1 ～ 2	0.2 ～ 3	0.4 ～ 3	0.5 ～ 5	0.5 ～ 3	0.5 ～ 3	0.2 ～ 2	0.2 ～ 3	0.5 ～ 2.5	0.2 ～ 2	0.2 ～ 1.5	0.5 ～ 2	0.3 ～ 1.5	0.25 ～ 3	0.1 ～ 0.75	1.5 ～ 6	0.4 ～ 3	1 ～ 6	0.5 ～ 6	2 ～ 10	0.3 ～ 6	0.05 ～ 1	0.1 ～ 3	0.5 ～ 3
Blade length (ℓ)(mm)	0.07 ～ 6	0.08 ～ 4.8	0.3 ～ 8	0.07 ～ 6	0.07 ～ 8	0.07 ～ 6	0.07 ～ 6	0.2 ～ 6	3 ～ 4.5	3 ～ 18	0.32 ～ 6	0.8 ～ 55	0.3 ～ 18	0.8 ～ 4.8	1.6 ～ 6	0.16 ～ 1.6	0.16 ～ 4.8	0.08 ～ 6	0.16 ～ 4.8	1.5 ～ 7.5	0.06 ～ 22	0.16 ～ 50	0.4 ～ 6	0.6 ～ 6	-	0.8 ～ 6	0.8 ～ 4.8	0.4 ～ 4	0.6 ～ 7.5	1.5 ～ 7.5	0.6 ～ 6	0.3 ～ 1.8	1.5 ～ 6	0.5 ～ 2.4	0.5 ～ 6	0.3 ～ 2.5	4.5 ～ 25	0.64 ～ 4.8	3 ～ 18	5 ～ 55	20 ～ 60	0.9 ～ 18	0.08 ～ 1.2	0.6 ～ 30	1.5 ～ 9
Underneck length (ℓ1)(mm)	0.2 ～ 60	0.3 ～ 60	2 ～ 60	0.2 ～ 50	0.2 ～ 60	0.3 ～ 50	0.2 ～ 60	0.5 ～ 50	10 ～ 20	-	2 ～ 80	-	-	3 ～ 50	4 ～ 30	1 ～ 30	0.5 ～ 40	0.3 ～ 50	0.5 ～ 50	5 ～ 50	-	1.5 ～ 62	1 ～ 50	6 ～ 50	4 ～ 55	7 ～ 60	20 ～ 50	2 ～ 40	2 ～ 60	3 ～ 40	4 ～ 60	2 ～ 15	5 ～ 20	1.5 ～ 12	2.5 ～ 30	-	-	3 ～ 30	-	-	-	-	0.3 ～ 10	2 ～ 80	4 ～ 50
Shank diameter (d)(mm)	4 ～ 6	3 ～ 6	4 ～ 12	4 ～ 6	3 ～ 8	4 ～ 6	3 ～ 6	4 ～ 6	4	4 ～ 12	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 6	4 ～ 6	4	4 ～ 6	3 ～ 6	4 ～ 6	6	4 ～ 12	4 ～ 6	4 ～ 6	4 ～ 6	6 ～ 10	4 ～ 8	4 ～ 8	4 ～ 6	4 ～ 6	6	4	4 ～ 6	6	4	6	4	3 ～ 12	4 ～ 6	4 ～ 12	4 ～ 12	4 ～ 20	4 ～ 12	4	3 ～ 6	4 ～ 8
Number of flutes(sheet)	2	2	2	2	2	2	2	2	4	4	2	2	2	2 ～ 3	4	2	2	2	2	2	2	2	2	2	2	3	3	2	2	2	2	2	2	2	2	2	2	2	4	2	4	3	2	2	2
Overall Length (L)(mm)	50 ～ 110	45 ～ 120	50 ～ 110	45 ～ 120	40 ～ 110	45 ～ 120	50 ～ 110	45 ～ 120	50 ～ 60	50 ～ 110	45 ～ 120	60 ～ 200	50 ～ 110	50 ～ 110	50 ～ 70	45 ～ 70	45 ～ 90	45 ～ 120	45 ～ 120	60 ～ 100	50 ～ 110	4 ～ 120	45 ～ 120	45 ～ 120	70 ～ 90	50 ～ 110	70 ～ 110	50 ～ 110	50 ～ 110	60 ～ 90	50 ～ 100	45 ～ 50	60 ～ 80	35 ～ 40	60 ～ 90	50	80 ～ 200	45 ～ 80	40 ～ 60	60 ～ 180	100 ～ 250	50 ～ 120	50 ～ 53	50 ～ 130	50 ～ 110
work material	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎] / Graphite[◎] / Resin[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[○] / Copper[◎] / Resin[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○/◎] / High Hardness Steel-HRC55[○/◎] / High Hardness Steel-HRC60[○/◎] / High Hardness Steel-HRC65[○/◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○/◎]	Aluminum[○] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○]	Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[◎] / Resin[○]	Aluminum[○] / Graphite[◎] / Resin[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Resin[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎]	High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]	Aluminum[◎] / Copper[◎] / Resin[◎]
R Precision(μm)	±0.005	-0.005～0.005 ～ -0.002～0.002	-0.007 ~ +0.003 ～ ±0.005	0.005～-0.005	-0.007 ~ +0.003 ～ ±0.005	0.005～-0.005 ～ 0.01～-0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007～+0.003	-0.015～+0.015	-0.01～0.01 ～ -0.005～0.005	-0.01～0.01	-0.01～0.01	-0.007～0.007 ～ -0.005～0.005	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.01～+0.01	-	-0.007～0.007 ～ -0.002～0.002	-0.005～0.005	-0.01～0.01	0.01～-0.01	±0.01	-0.007 ~ +0.003 ～ ±0.005	-0.007 ~ +0.003 ～ ±0.005	±0.005	±0.01	-0.01～+0.01	-0.01～+0.01 ～ -0.008～+0.008	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.005～+0.005	-0.005～0.005	-0.007～0.007 ～ -0.005～0.005	-0.002～0.002	-0.01～0.01 ～ -0.005～0.005	-0.01～0.01	-0.01～0.01	-0.01～0.01 ～ -0.005～0.005	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	0.01～-0.01
Machining Application	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove	R Groove
Coating	MRC	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	For General Steels (AlCrN, etc.)	CrN	DG	For High Hardness (Silicon Group)	Dia Coat	Non-Coated	TiCN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	CrN	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	TiAlN	Dia Coat	For High Hardness (Silicon Group)	For High Hardness (Silicon Group) / For General Steels (AlCrN, etc.)	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	CrN	Dia Coat	CrN	DG	Non-Coated	DLC	For General Steels (AlCrN, etc.)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Dia Coat	Non-Coated	TiCN	Non-Coated	Non-Coated	Non-Coated
Type	Long-Neck Ball	Long-Neck Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball / Spherical Ball	Tapered neck ball	Tapered neck ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball

Loading...