Ball End Mills (Carbide)（work material：High Hardness Steel-HRC55）

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPB220 CBN Super Spiral Ball End Mill

  NS TOOL

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  [Features]
  · Spiral ball shape used to improve sharpness of cutting edge.
  · The cutting edge shape used improves the chipping resistance of the cutting edge.
  · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
  Torsion angle: 20°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.15 ～ 3.6	0.3 ～ 18	-	2	52 ～ 70	High Hardness Steel-HRC55[◎]	3 to -3 ～ 5 to -5	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL series carbide ball end mill, 2-flute / short model

  MISUMI

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now
  
  XAL Series is the definitive choice for cost-sensitive customers

  • Volume Discount

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	3 ～ 20	2	40 ～ 160	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 907.20
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 2-Flute / Short Type

  MISUMI

  [Features]
  ·Good finish can be expected for surface coarse of workpiece after processing
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 25	15 ～ 75	3 ～ 20	2	40 ～ 150	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	High Hardness Steel-HRC55[◎]	0.003～-0.003 ～ 0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,239.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-HS-EBD

  OSG

  WXL coating has excellent lubrication and resistance to wear. Can be used for a wide range of work materials and cutting areas

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.4 ～ 18	-	4 ～ 12	2	35 ～ 70	High Hardness Steel-HRC55[○]	-0.007～+0.003 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 1,496.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Pencil-Neck Type, 3-Flute PHX-PC-DBT

  OSG

  Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	6 ～ 160.8	6 ～ 20	3	60 ～ 220	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 11,441.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230S MUGEN-COATING Short Ball End Mill

  NS TOOL

  The high-rigidity design enables high speed machining without chattering

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.2 ～ 12	-	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 2,881.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	High Hardness Steel-HRC55[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

  MISUMI

  High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 10	0.4 ～ 25	-	4 ～ 20	2	50 ～ 150	High Hardness Steel-HRC55[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: ₹ 1,074.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBL230 MUGEN-COATING Long Ball End Mill

  NS TOOL

  Machining utilizing the benefits of a long shank is possible

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 5	0.5 ～ 25	-	3 ～ 10	2	70 ～ 200	High Hardness Steel-HRC55[◎]	0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 7,182.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-EBD

  OSG

  [Features]
  · High-accuracy ball end mill coated with WXL hard lubricating film coating.
  Proven performance on a wide range of work materials.
  Long life regardless of whether being used for dry-type or wet-type machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 10	0.2 ～ 38	-	4 ～ 20	2	40 ～ 160	High Hardness Steel-HRC55[○]	-0.007 to 0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,011.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAL Series Carbide Ball End Mill, 2-Flute / Regular Model

  MISUMI

  The regular flute length type is introduced in the low-price and popular XAL balls

  • XAL
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 48	-	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	High Hardness Steel-HRC55[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,890.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXL-PC-EBD

  OSG

  [Features]
  · WXL coating with excellent lubrication and wear resistance.
  Can be used with a wide range of work materials and cutting applications

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 6	0.16 ～ 12	1 ～ 80	4 ～ 16	2	45 ～ 160	High Hardness Steel-HRC55[○]	-0.005 to +0.005 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,112.00
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Pencil-neck Type, 2-Flute FX-PCL-EBD

  OSG

  Ball end mill for deep-engraving in places that cannot be reached with ordinary end mills.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 6	8 ～ 22	100 ～ 140	10 ～ 16	2	200 ～ 250	High Hardness Steel-HRC55[○]	-0.01～0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 35,900.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSB200 CBN Super Speed Ball End Mill

  NS TOOL

  High efficiency CBN ball end mill that combines CBN's long life and high precision with carbide's ease of use

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.3 ～ 5	4	2	52 ～ 53	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 3 to -3	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSBH230 2-Flute Ball-End Mill for High-Hardness

  NS TOOL

  Standard type ball end mill for high hardness. Ideal for finishing

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 100	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MSB230 MUGEN-COATING 2-Flute Ball End Mill

  NS TOOL

  Supports three-dimensional precision machining from low to high speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 6	0.1 ～ 20	-	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC55[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / R Groove	TiAlN	Ball

  From: ₹ 2,041.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

  OKAZAKI SEIKO

  Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 12.5	2 ～ 60	14 ～ 21	6 ～ 25	2	80 ～ 230	High Hardness Steel-HRC55[◎]	-	Curved surface / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 6,434.80
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Wonder ball end mill two blades

  CREATE TOOL

  [Features]
  A 2-flute end mill.
  It can be used for high hardness steel workpieces.
  It has excellent heat resistance due to its carbide material.
  [Applications]
  Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 10	3 ～ 30	-	6 ～ 20	2	60 ～ 160	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 2,755.11
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Ball GSXB

  NACHI(FUJIKOSHI)

  [Features]
  · Supports a wide range of materials from raw materials to hardened materials.
  · GSX II coating improves heat and abrasion resistance.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 3	3 ～ 9	-	6	2	60 ～ 80	High Hardness Steel-HRC55[○]	-	-	For General Steels (AlCrN, etc.)	Ball

  From: ₹ 3,231.04
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (R accuracy ±3μm)

  MISUMI

  [Features]
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. Optimal for high precision 3D machining of molds with high-quality tools with little variation in quality
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 3	4.5 ～ 9	-	6	2	60 ～ 90	High Hardness Steel-HRC55[○]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,231.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

  MISUMI

  [Features]
  ·Designed with optimum blade length, shank length and overall length considering processing using shrink fit holder
  ·Radius tolerance within 6 µm (compared to the manufacturer measurement), shank diameter tolerance h5 standard adopted. High precision tools with little quality variation are ideal for high precision 3D machining of molds
  ·Seamless shape (sharpening from outer edge to center of rounded blade in 1 process) is designed to create smooth cutting edge flank with no steps

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 2	0.6 ～ 4	-	6	2	40	High Hardness Steel-HRC55[○]	±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,564.45
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

  MISUMI

  [Features]
  ·Compatible with shrink fit chucks for high-precision machining
  ·Designed with short flute length and overall length for shrink fit and emphasis on rigidity
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	-	4 ～ 12	2	40 ～ 65	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,397.93
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short model

  MISUMI

  [Features]
  ·General purpose 2-blade ball end mill for wide range of profiling
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 12.5	0.8 ～ 50	-	3 ～ 25	2	40 ～ 180	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 1,260.11
  Days to Ship: Same day or more

  Same day or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XAC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Ideal for high accuracy 3D machining of molds due to high tool rigidity and excellent chip removal capability
  ·For surface coarse of workpiece, good surface finish can be expected after machining.
  ·Long shank type, ideal for deep cavity milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TiAlN
  • General Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  2 ～ 8	8 ～ 30	-	4 ～ 16	2	100 ～ 250	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,008.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, regular model

  MISUMI

  [Features]
  ·Regular bridge length allows for many regrinding times
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	17 ～ 80	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC series carbide ball end mill, 2-flute / short, long shank model

  MISUMI

  [Features]
  ·Long shank type ideal for deep cavity milling
  It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	2 ～ 30	15 ～ 80	3 ～ 25	2	70 ～ 280	High Hardness Steel-HRC55[○]	-0.007 ~ +0.003 ～ ±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / short model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 10	2 ～ 25	15 ～ 75	6 ～ 20	3	50 ～ 150	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 3-flute / regular model

  MISUMI

  [Features]
  ·3-flute shape is resistant to chattering and enables high feed
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 3 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	3	50 ～ 110	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill 4-Flute / Short Type

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 10	3 ～ 25	15 ～ 75	6 ～ 20	4	50 ～ 150	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide ball end mill, 4-flute / regular model

  MISUMI

  [Features]
  ·Surface coarse of workpiece after processing is very good finish.
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. As coating characteristic, it is effective in high-speed machining and dry machining.
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1.5 ～ 6	5 ～ 22	17 ～ 72	6 ～ 12	4	60 ～ 110	High Hardness Steel-HRC55[○]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]
  ·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
  ·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	High Hardness Steel-HRC55[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,879.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	High Hardness Steel-HRC55[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,566.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	High Hardness Steel-HRC55[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,320.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

  MISUMI

  The user friendly regular flute length type is released simultaneously

  • MR
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	-	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC55[◎]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: ₹ 1,254.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck Hard Ball GSBNH2

  NACHI(FUJIKOSHI)

  [Features]
  · Ideal for fine machining of molds.
  · Available in various sizes and can be used for all kinds of machining.
  · Cutting blades with a tapered back make contact with a workpiece with a shorter length.
  · Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5	1.5	-	4	2	45	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,476.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.
  ·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	High Hardness Steel-HRC55[◎]	-	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 28,086.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	High Hardness Steel-HRC55[◎]	-0.003～+0.003	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,674.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6

  OSG

  Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 3.2	1 ～ 30	6	2	50 ～ 100	High Hardness Steel-HRC55[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 12,129.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
  Coated for steel
  Standard/Alteration category: Manufacturer's standard product
  Number of flutes (pcs.) 2
  Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
  R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 10,043.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-EBD

  OSG

  2-Flute Ball End Type CBN-EBD
  ·Demonstrates high performance in machining high-rigid materials and cast iron
  ·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	4 ～ 7	20	6 ～ 12	2	90 ～ 110	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 35,727.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WX-EBD

  OSG

  A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.6	3	-	4	2	50	High Hardness Steel-HRC55[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,557.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXS-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.75 ～ 2	1.5 ～ 4	3 ～ 8	4	2	50 ～ 60	High Hardness Steel-HRC55[◎]	-0.007～+0.007 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,134.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	NS TOOL	MISUMI	MISUMI	NS TOOL	OSG	OSG	NS TOOL	MISUMI	MISUMI	NS TOOL	OSG	MISUMI	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	OKAZAKI SEIKO	CREATE TOOL	NACHI(FUJIKOSHI)	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG
Product Series	SSPB220 CBN Super Spiral Ball End Mill	XAL series carbide ball end mill, 2-flute / short model	TSC Series Carbide Ball End Mill 2-Flute / Short Type	SFB200 CBN Super Finish Ball End Mill	Ball End Type, 2-Flute WXL-HS-EBD	Pencil-Neck Type, 3-Flute PHX-PC-DBT	MSB230S MUGEN-COATING Short Ball End Mill	CBN Ball End Mill, 2-Flute	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MSBL230 MUGEN-COATING Long Ball End Mill	Ball End Type, 2-Flute WXL-EBD	XAL Series Carbide Ball End Mill, 2-Flute / Regular Model	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute FX-MG-EBD	Ball End Type, 2-Flute WXL-PC-EBD	Long Pencil-neck Type, 2-Flute FX-PCL-EBD	SSB200 CBN Super Speed Ball End Mill	MSBH230 2-Flute Ball-End Mill for High-Hardness	MSB230 MUGEN-COATING 2-Flute Ball End Mill	SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated	Wonder ball end mill two blades	GSX MILL Ball GSXB	TSC series carbide ball end mill (R accuracy ±3μm)	TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model	TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model	XAC series carbide ball end mill, 2-flute / short model	XAC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, regular model	TSC series carbide ball end mill, 2-flute / short, long shank model	TSC series carbide ball end mill, 3-flute / short model	TSC series carbide ball end mill, 3-flute / regular model	TSC Series Carbide Ball End Mill 4-Flute / Short Type	TSC series carbide ball end mill, 4-flute / regular model	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	CBN Mold Finish Master BNBP	Mold Meister Ball 2MMR	Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute CBN-EBD	Ball End Type, 2-Flute WX-EBD	Ball End Type, 2-Flute WXS-EBD
From		₹ 907.20		₹ 19,239.38	₹ 1,496.45	₹ 11,441.45	₹ 2,881.36	₹ 10,797.96	₹ 1,074.55	₹ 7,182.16	₹ 3,011.00		₹ 19,114.84	₹ 9,890.44	₹ 3,112.00	₹ 35,900.13		₹ 2,168.82	₹ 2,041.56	₹ 6,434.80	₹ 2,755.11	₹ 3,231.04	₹ 3,231.25	₹ 3,564.45	₹ 1,397.93	₹ 1,260.11	₹ 3,008.00							₹ 5,879.24	₹ 3,566.73	₹ 1,320.00	₹ 1,254.00	₹ 3,476.84	₹ 28,086.85	₹ 15,674.47	₹ 12,129.91	₹ 10,043.13	₹ 35,727.35	₹ 3,557.78	₹ 3,134.53
Days to Ship	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	Same day or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications		XAL General Steel 2 Flutes	TS General Steel 2 Flutes S (Short)					High-Hardness Steel 2 Flutes	MR General Steel 2 Flutes S (Short)			XAL General Steel 2 Flutes											TS General Steel 2 Flutes S (Short)	TS General Steel 2 Flutes B (Stub)	TS General Steel 2 Flutes B (Stub)	TiAlN General Steel 2 Flutes S (Short)	TiAlN General Steel 2 Flutes	TS General Steel 2 Flutes R (Regular)	TS General Steel 2 Flutes S (Short)	TS General Steel 3 Flutes S (Short)	TS General Steel 3 Flutes R (Regular)	TS General Steel 4 Flutes S (Short)	TS General Steel 4 Flutes R (Regular)	TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)		MR General Steel 2 Flutes R (Regular)
R Size(mm)	0.1 ～ 3	0.05 ～ 10	0.05 ～ 10	0.1 ～ 1	0.1 ～ 6	0.5 ～ 6	0.1 ～ 6	0.3 ～ 1	0.1 ～ 10	0.1 ～ 5	0.05 ～ 10	0.2 ～ 8	0.2 ～ 1.5	0.5 ～ 15	0.1 ～ 6	2 ～ 6	0.1 ～ 1	0.05 ～ 6	0.05 ～ 6	1 ～ 12.5	1.5 ～ 10	1 ～ 3	1.5 ～ 3	0.3 ～ 2	0.2 ～ 6	0.2 ～ 12.5	2 ～ 8	0.2 ～ 8	0.5 ～ 12.5	0.5 ～ 10	1 ～ 6	1 ～ 10	1.5 ～ 6	1 ～ 5	0.3 ～ 3	0.5 ～ 12.5	0.2 ～ 8	0.5	0.2 ～ 1	0.5 ～ 6	0.1 ～ 2	0.2 ～ 1.5	3 ～ 6	0.6	0.75 ～ 2
Blade length (ℓ)(mm)	0.15 ～ 3.6	0.2 ～ 38	0.2 ～ 25	0.15 ～ 1.2	0.4 ～ 18	1.5 ～ 18	0.2 ～ 12	0.5 ～ 1.2	0.4 ～ 25	0.5 ～ 25	0.2 ～ 38	1.5 ～ 48	0.3 ～ 1.8	2.5 ～ 55	0.16 ～ 12	8 ～ 22	0.15 ～ 1.2	0.1 ～ 20	0.1 ～ 20	2 ～ 60	3 ～ 30	3 ～ 9	4.5 ～ 9	0.6 ～ 4	0.4 ～ 12	0.8 ～ 50	8 ～ 30	1.5 ～ 30	2 ～ 30	2 ～ 25	5 ～ 22	3 ～ 25	5 ～ 22	1 ～ 5	0.6 ～ 6	1 ～ 25	1.5 ～ 30	1.5	0.3 ～ 1.4	1.5 ～ 18	0.16 ～ 3.2	0.8 ～ 8	4 ～ 7	3	1.5 ～ 4
Underneck length (ℓ1)(mm)	0.3 ～ 18	-	15 ～ 75	0.5 ～ 5	-	6 ～ 160.8	-	1.5 ～ 5	-	-	-	-	1.2 ～ 6	-	1 ～ 80	100 ～ 140	0.3 ～ 5	-	-	14 ～ 21	-	-	-	-	-	-	-	17 ～ 80	15 ～ 80	15 ～ 75	17 ～ 72	15 ～ 75	17 ～ 72	5 ～ 10	-	2.2 ～ 50	-	-	1.2 ～ 5.5	-	1 ～ 30	-	20	-	3 ～ 8
Shank diameter (d)(mm)	-	3 ～ 20	3 ～ 20	4	4 ～ 12	6 ～ 20	4 ～ 12	4	4 ～ 20	3 ～ 10	4 ～ 20	4 ～ 16	4 ～ 6	4 ～ 25	4 ～ 16	10 ～ 16	4	4 ～ 12	4 ～ 12	6 ～ 25	6 ～ 20	6	6	6	4 ～ 12	3 ～ 25	4 ～ 16	4 ～ 16	3 ～ 25	6 ～ 20	6 ～ 12	6 ～ 20	6 ～ 12	6 ～ 10	6	4 ～ 25	4 ～ 16	4	4 ～ 6	4 ～ 12	6	3	6 ～ 12	4	4
Number of flutes(sheet)	2	2	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	3	3	4	4	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	52 ～ 70	40 ～ 160	40 ～ 150	50 ～ 52	35 ～ 70	60 ～ 220	50 ～ 110	50	50 ～ 150	70 ～ 200	40 ～ 160	50 ～ 140	45 ～ 50	50 ～ 180	45 ～ 160	200 ～ 250	52 ～ 53	50 ～ 100	50 ～ 110	80 ～ 230	60 ～ 160	60 ～ 80	60 ～ 90	40	40 ～ 65	40 ～ 180	100 ～ 250	50 ～ 140	70 ～ 280	50 ～ 150	50 ～ 110	50 ～ 150	60 ～ 110	50 ～ 90	40	40 ～ 180	50 ～ 140	45	50	50 ～ 120	50 ～ 100	40	90 ～ 110	50	50 ～ 60
work material	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[○]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]	High Hardness Steel-HRC55[◎]
R Precision(μm)	3 to -3 ～ 5 to -5	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	0.003～-0.003 ～ 0.005～-0.005	-0.007～+0.003 ～ -0.005～+0.005	-	0.005～-0.005 ～ 0.01～-0.01	±0.005	±0.005 ～ ±0.01	0.01～-0.01	-0.007 to 0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.005～+0.005	-0.01～+0.01	-0.005 to +0.005 ～ -0.005～+0.005	-0.01～0.01	0.005～-0.005 ～ 3 to -3	0.005～-0.005 ～ 0.01～-0.01	0.005～-0.005 ～ 0.01～-0.01	-	-	-	-0.005 ~ +0.001 ～ ±0.003	±0.003	-0.007 ~ +0.003 ～ ±0.005	±0.01	±0.01	-0.007 ~ +0.003 ～ ±0.01	-0.007 ~ +0.003 ～ ±0.01	±0.01	±0.01	±0.01	±0.01	±0.01	-0.005 ~ +0.001 ～ ±0.003	±5 ～ ±10	±0.005 ～ ±0.01	-	-	-0.003～+0.003	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01	-0.007～+0.007 ～ -0.005～+0.005
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / R Groove	Curved surface / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	Non-Coated	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	TiAlN	Non-Coated	MRC	TiAlN	For General Steels (AlCrN, etc.)	For General Steels (AlCrN, etc.)	Non-Coated	TiAlN	For General Steels (AlCrN, etc.)	TiAlN	Non-Coated	For High Hardness (Silicon Group)	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	TiAlN	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	MRC	TiAlN	-	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	For High Hardness (Silicon Group)
Type	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...