Carbide Ball End Mills（work material：High Hardness Steel-HRC60）

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model

  MISUMI

  High-performance MRC series is available in the industry's largest number of sizes

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 60	4 ～ 6	2	50 ～ 110	High Hardness Steel-HRC60[○]	±0.005	Curved surface / Side / Engraving / R Groove	MRC	Long-Neck Ball

  From: ₹ 1,171.25
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPB220 CBN Super Spiral Ball End Mill

  NS TOOL

  [Features]
  · Spiral ball shape used to improve sharpness of cutting edge.
  · The cutting edge shape used improves the chipping resistance of the cutting edge.
  · When the peripheral cutting edge makes contact with the cutting surface, chatter vibration occurs due to an increase in cutting resistance and this affects tool life and cutting surface quality. (This effect can be reduced by using a strong back taper shape.)
  Torsion angle: 20°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.15 ～ 3.6	0.3 ～ 18	-	2	52 ～ 70	High Hardness Steel-HRC60[◎]	3 to -3 ～ 5 to -5	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)

  NS TOOL

  Neck relief type suitable to narrow deep processing. Supports three-dimensional precision deep engraving from low to high speeds

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.3 ～ 50	4 ～ 6	2	45 ～ 120	High Hardness Steel-HRC60[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 2,168.82
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HM Coated 2-flute, Long Neck Ball HSLB

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.08 ～ 4.8	0.3 ～ 60	3 ～ 6	2	45 ～ 120	High Hardness Steel-HRC60[◎]	-0.005～0.005 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 1,854.07
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  MRBH230 Long-Neck Ball, Hard (for High Hardness)

  NS TOOL

  The Infinity Coating Premium for high hardness and unique new shape provide excellent chipping resistance, and chattering is suppressed to improve the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 3	0.07 ～ 6	0.2 ～ 50	4 ～ 6	2	45 ～ 120	High Hardness Steel-HRC60[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Long-Neck Ball

  From: ₹ 2,182.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SFB200 CBN Super Finish Ball End Mill

  NS TOOL

  The newly developed blade shape provides excellent sharpness through the radius center. Capable of finishing 60 HRC hardened steel for 10 continuous hours or more

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.5 ～ 5	4	2	50 ～ 52	High Hardness Steel-HRC60[◎]	0.003～-0.003 ～ 0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,239.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Ball End Mill, 2-Flute

  MISUMI

  CBN ball end mill that's ideal for precision finishing is available at a value price

  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 1	0.5 ～ 1.2	1.5 ～ 5	4	2	50	High Hardness Steel-HRC60[◎]	±0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 10,797.96
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HSB, HM Coated 2-Flute Ball

  UNION TOOL

  [Features]
  · Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.
  · New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance
  · Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow
  · The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative
  · The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.03 ～ 6	0.06 ～ 22	-	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC60[◎]	-0.007～0.007 ～ -0.002～0.002	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,829.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]

  UNION TOOL

  [Features]
  · Significantly enhances machining efficiency.
  · The chip discharge capacity is up to 27 times higher (compared to the manufacturer's previous product)
  · With the newly developed ball tip shape, the bottom surface is treated with non-polish processing
  · Reasonable price setting
  · Has 4 flutes but is still cheaper than 3-flute types from other companies

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	3 ～ 18	-	4 ～ 12	4	50 ～ 110	High Hardness Steel-HRC60[◎]	-0.01～0.01 ～ -0.005～0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,394.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank

  SANDVIK

  High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 8	1 ～ 16	20	4 ～ 16	2 ～ 4	57 ～ 140	High Hardness Steel-HRC60[○]	-	Curved surface	Other	Tapered neck ball

  From: ₹ 9,507.36
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)

  SANDVIK

  High quality carbide end mill tools for a highly productive, efficient and reliable milling solution

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 0.5	0.3 ～ 1	1 ～ 10	6	2	54 ～ 57	High Hardness Steel-HRC60[○]	-	Curved surface	Other	Long-Neck Ball

  From: ₹ 11,008.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-SS-EBD

  OSG

  Slim shank type with a shank diameter that is set to the blade diameter minus 1 mm. The protruding length can be freely adjusted.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	12 ～ 22	-	5 ～ 11	2	120 ～ 160	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,367.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6

  OSG

  Super ultra-fine particle carbide alloy and high rigidity pencil neck achieves high speeds, high precision, and a super long life. Also eliminates chattering problems inherent in fine shape processing and carving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 2	0.16 ～ 3.2	1 ～ 30	6	2	50 ～ 100	High Hardness Steel-HRC60[○]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 12,129.91
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS

  OSG

  Ball end mill for heavy cutting that enables high speed and high efficiency (large cutting depth). Short overall length which fits shrink-fit and HSK types perfectly.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	High Hardness Steel-HRC60[◎]	-0.015～+0.015 ～ -0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,244.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-HO-MG-EBD

  OSG

  The oil hole shows its true performance when drilling deep holes where chip discharge can be problematic.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 10	12 ～ 38	-	6 ～ 20	2	90 ～ 160	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,379.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 3-Flute FXS-PC-EBT

  OSG

  In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 6	2 ～ 12	20 ～ 85	6 ～ 16	3	70 ～ 160	High Hardness Steel-HRC60[○]	-0.015～+0.015	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 16,746.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball-End Type, 2-Flute For finishing FX-H-EBD

  OSG

  Provides stable cutting not only with HSK holders but also with shrink-fit long arbors with large L/D ratio.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1 ～ 12	2.5 ～ 30	6 ～ 12	2	50 ～ 80	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,843.56
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Long Neck Ball Type, 2-Flute WX-LN-EBD

  OSG

  A long neck ball where the effective length can be selected to suit the machining shape. The high toughness carbide base material achieves stable cutting for a wide range of processing.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 50	4 ～ 6	2	45 ～ 120	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Long-Neck Ball

  From: ₹ 3,793.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSBL200 CBN Super Speed Long Neck Ball End Mill

  NS TOOL

  Effective length up to 10 mm. Supports deeper machining compared with conventional CBN tools

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.05 ～ 1	0.08 ～ 1.2	0.3 ～ 10	4	2	50 ～ 53	High Hardness Steel-HRC60[◎]	0.005～-0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Long-Neck Ball

  From: ₹ 16,016.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)

  NS TOOL

  Short shank type (supports shrink fit). Ball end mill designed for high-speed and high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	0.5 ～ 15	4 ～ 6	2	35 ～ 45	High Hardness Steel-HRC60[◎]	0.005～-0.005 ～ 0.01～-0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,121.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining

  NS TOOL

  The world's first. Micro ball end mill made of CBN material. Achieves sharp edges by making the best use of the CBN material characteristics

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.01 ～ 0.05	0.02 ～ 0.1	-	4	1	50	High Hardness Steel-HRC60[◎]	-	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 22,997.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN 2-Flute Spiral Ball-End Mill SBBE-2

  KYOWA SEIKO

  Direct carving of high hardness material and hardened steel.
  It is possible to increase the depth of cut.
  Machining applications (machining shape): Side surface / curved surface / engraving / R (radius) groove

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 3.5	-	6	2	50 ～ 60	High Hardness Steel-HRC60[◎]	＋0.005～－0.005	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 14,967.69
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)

  SANDVIK

  High-quality carbide end mill CoroMill® for a highly productive, efficient and reliable milling solutionPlura profiling carbide ball end mill

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 8	2 ～ 15	20 ～ 61	6 ～ 16	2 ～ 4	75 ～ 150	High Hardness Steel-HRC60[○]	-	Curved surface	Other	Ball

  From: ₹ 12,070.96
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SSPBL220 CBN Super Spiral Long Neck Ball End Mill

  NS TOOL

  [Features]
  · Supports deeper milling by utilizing the features of SSPB220 and through the use of a spiral ball shape and strong back taper shape to improve both sharpness and the chipping resistance of cutting edges.
  

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 1	0.15 ～ 1.2	0.9 ～ 20	-	2	51 ～ 53	High Hardness Steel-HRC60[◎]	-0.003 to 0.003	Curved surface	Non-Coated	Long-Neck Ball

  From: ₹ 17,937.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Single Cut Ball 70 End Mill DH-OCHB Type

  DIJET

  [Features]
  · One mill for roughing to finishing high-hardness material.
  · 4-blade solid ball end mill, capable of machining even 70 HRC hardness.
  · Reduces chattering by using high tool rigidity and unequal divisions.
  · Implements good cutting performance with low resistance, with a torsion angle of 45°.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  -	7.5 ～ 9	24 ～ 36	-	4	-	High Hardness Steel-HRC60[○]	±8	Curved surface / Engraving / R Groove	Other	Ball

  From: ₹ 6,815.16
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S

  UNION TOOL

  [Features]
  · Can be used for machining at short overhang lengths.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.16 ～ 4.8	0.5 ～ 20	4 ～ 6	2	35 ～ 50	High Hardness Steel-HRC60[○]	±3 ～ ±5	-	-	Long-Neck Ball

  From: ₹ 1,830.54
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

  MISUMI

  [Features]
  ·Ultra-fine particle cemented carbide base material suitable for machining high hardness steel is used (according to the manufacturer cutting test results).
  ·MISUMI original shape with cutting edge rigid treatment and no side cutting edge. High rigid tool and cutting edge strength, achieving stable cutting edge shape and long tool lifespan in high-speed milling
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 2 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  1 ～ 5	1 ～ 5	5 ～ 10	6 ～ 10	2	50 ～ 90	High Hardness Steel-HRC60[◎]	±0.01	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 5,879.24
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

  MISUMI

  The high precision ball end mill for shrink fit holder is ideal for the high-precision 3D machining of high-hardness steel

  • TS
  • High-Hardness Steel
  • 2 Flutes
  • B (Stub)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.3 ～ 3	0.6 ～ 6	-	6	2	40	High Hardness Steel-HRC60[◎]	-0.005 ~ +0.001 ～ ±0.003	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,566.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

  MISUMI

  [Features]
  ·3-flute, short-flute length shape is used to resist chattering and enable high-feed machining
  ·Taper neck is effective in suppressing chattering
  ·Machining of high hardness steel up to 65HRC is possible
  ·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties
  ·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • High-Hardness Steel
  • 3 Flutes

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 3	0.8 ～ 4.8	20 ～ 50	4 ～ 8	3	70 ～ 110	High Hardness Steel-HRC60[◎]	-0.007 ~ +0.003 ～ ±0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Tapered neck ball

  From: ₹ 3,991.73
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type

  MISUMI

  · A highly versatile series that's ideal for machining work materials from tempered steel (up to 45 HRC) to high hardness steel (up to 65 HRC).
  · Coating with excellent hardness and heat resistance makes it suitable for high speed machining. Popular ball end mill for high-hardness machining

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 12.5	1 ～ 25	2.2 ～ 50	4 ～ 25	2	40 ～ 180	High Hardness Steel-HRC60[◎]	±5 ～ ±10	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 1,320.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model

  MISUMI

  High-performance products with emphasis on the machined surface accuracy are available in the deferred prices of the conventional products!

  • MR
  • General Steel
  • 2 Flutes
  • S (Short)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 10	0.4 ～ 25	-	4 ～ 20	2	50 ～ 150	High Hardness Steel-HRC60[○]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: ₹ 1,074.55
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model

  MISUMI

  The user friendly regular flute length type is released simultaneously

  • MR
  • General Steel
  • 2 Flutes
  • R (Regular)

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 8	1.5 ～ 30	-	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC60[○]	±0.005 ～ ±0.01	Curved surface / Side / Engraving / R Groove	MRC	Ball

  From: ₹ 1,254.00
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Long Neck Hard Ball GSBNH2

  NACHI(FUJIKOSHI)

  [Features]
  · Ideal for fine machining of molds.
  · Available in various sizes and can be used for all kinds of machining.
  · Cutting blades with a tapered back make contact with a workpiece with a shorter length.
  · Tapered back for reduction of cutting resistance and achievement of good roughness of the finished surface

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.1 ～ 3	0.2 ～ 6	-	4 ～ 6	2	45 ～ 120	High Hardness Steel-HRC60[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 2,882.15
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball Long Shank 2GEOLSR

  NACHI(FUJIKOSHI)

  [Features]
  A carbide end mill with 2 flutes.
  The high cutting speed and high production efficiency lead to overall production cost reduction.
  The long shank allows contouring at deep positions and can be lengthened to suit the application.
  [Applications]
  Suitable for side milling, curved surface milling, engraving, and R-grooving.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	10 ～ 100	4 ～ 32	2	80 ～ 230	High Hardness Steel-HRC60[◎]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 6,920.98
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CBN Mold Finish Master BNBP

  NACHI(FUJIKOSHI)

  ·CBN ball end mill.
  ·Suitable for high-speed finishing of high-hardness material dies.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1	0.3 ～ 1.4	1.2 ～ 5.5	4 ～ 6	2	50	High Hardness Steel-HRC60[◎]	-	Curved surface / Side / Engraving / R Groove	-	Ball

  From: ₹ 28,086.85
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Hard Ball GSBH

  NACHI(FUJIKOSHI)

  Suitable for high-speed finishing of high-hardness molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 6	0.4 ～ 12	0.6 ～ 7.5	4 ～ 12	2	50 ～ 110	High Hardness Steel-HRC60[◎]	-	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 6,542.71
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GS MILL Ball 2GSR

  NACHI(FUJIKOSHI)

  Supports a wide range of materials from raw materials to hardened materials. Suitable for processing of curved surfaces.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  5	15	-	10	2	100	High Hardness Steel-HRC60[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 7,636.31
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Mold Meister Ball 2MMR

  NACHI(FUJIKOSHI)

  Ideal for precision mold polish-free machining. Rounding accuracy: ±3 μm, rounding accuracy range: 180°

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 6	1.5 ～ 18	-	4 ～ 12	2	50 ～ 120	High Hardness Steel-HRC60[◎]	-0.003～+0.003	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 15,674.47
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  X's Mill Geo Ball 2GEOR

  NACHI(FUJIKOSHI)

  Supports a wide range of applications from mold steel to high-hardness steel. Ideal for finishing molds.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	1.5 ～ 45	3 ～ 80	4 ～ 32	2	50 ～ 200	High Hardness Steel-HRC60[◎]	0～-0.04 ～ 0～-0.03	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 5,931.73
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD-3

  OSG

  A wide range of machining is possible with the adoption of FX coating and high-toughness carbide material.
  Coated for steel
  Standard/Alteration category: Manufacturer's standard product
  Number of flutes (pcs.) 2
  Shank diameter (mm) 3, overall length (mm) 40, helix angle: standard helix (30 to 44°)
  R Accuracy (µm) ±10

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.8 ～ 8	-	3	2	40	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 10,043.13
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-EBD

  OSG

  2-Flute Ball End Type CBN-EBD
  ·Demonstrates high performance in machining high-rigid materials and cast iron
  ·With a wide variety of lineup of CBN tools, you can select one of the best tool for your application.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  3 ～ 6	4 ～ 7	20	6 ～ 12	2	90 ～ 110	High Hardness Steel-HRC60[◎]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 35,727.35
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute CBN-SXB

  OSG

  Spiral ball blade with unique torsion that provides a sharp cutting edge and deep cutting at a small diameter. CBN end mill which can be used for cutting with the feel of carbide

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.2 ～ 1.5	0.3 ～ 1.8	1.2 ～ 6	4 ～ 6	2	45 ～ 50	High Hardness Steel-HRC60[◎]	-0.005～+0.005	Curved surface / Side / Engraving / R Groove	Non-Coated	Ball

  From: ₹ 19,114.84
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute FX-MG-EBD

  OSG

  Machining is possible with a wide range of materials, from general materials to hardened steel. Also usable with high-speed machining center.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.5 ～ 15	2.5 ～ 55	-	4 ～ 25	2	50 ～ 180	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 9,890.44
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WX-EBD

  OSG

  A general-purpose ball end mill that can be used for a wide range of work materials and machining. Enables stable continuous processing for many hours thanks to high toughness carbide being used as its base material.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.6	3	-	4	2	50	High Hardness Steel-HRC60[○]	-0.01～+0.01	Curved surface / Side / Engraving / R Groove	TiAlN	Ball

  From: ₹ 3,557.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ball End Type, 2-Flute WXS-EBD

  OSG

  Ultra-heat-resistant, ultra-hard WX super coated high precision ball end mill. Ideal for high-speed direct engraving of hardened steel as well as, of course, high-speed general steel machining.

  R Size(mm)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	R Precision(μm)	Machining Application	Coating	Type
  0.75 ～ 8	1.5 ～ 24	3 ～ 8	4 ～ 16	2	50 ～ 140	High Hardness Steel-HRC60[◎]	-0.01～+0.01 ～ -0.005～+0.005	Curved surface / Side / Engraving / R Groove	For High Hardness (Silicon Group)	Ball

  From: ₹ 3,134.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
R Size(mm)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
R Precision(μm)
Machining Application
Coating
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	NS TOOL	NS TOOL	UNION TOOL	NS TOOL	NS TOOL	MISUMI	UNION TOOL	UNION TOOL	SANDVIK	SANDVIK	OSG	OSG	OSG	OSG	OSG	OSG	OSG	NS TOOL	NS TOOL	NS TOOL	KYOWA SEIKO	SANDVIK	NS TOOL	DIJET	UNION TOOL	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	NACHI(FUJIKOSHI)	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	MRC Series Carbide Long Neck Ball End Mill, 2-Flute / Long Neck Model	SSPB220 CBN Super Spiral Ball End Mill	MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)	HM Coated 2-flute, Long Neck Ball HSLB	MRBH230 Long-Neck Ball, Hard (for High Hardness)	SFB200 CBN Super Finish Ball End Mill	CBN Ball End Mill, 2-Flute	HSB, HM Coated 2-Flute Ball	HFB, HM Coated, 4-Flute High Efficiency Ball End Mill [Alteration Supported Product]	Ball End Mill, Center Cut, R216.4 (Hardness 43 HRC to 63 HRC), Cylindrical Shank	CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)	Ball End Type, 2-Flute FX-SS-EBD	Short Pencil-neck Type, 2-Flute FX-PCS-EBD-6	Ball End Type, 2-Flute for Heavy Cutting FX-HS-EBDS	Ball End Type, 2-Flute FX-HO-MG-EBD	Ball End Type, 3-Flute FXS-PC-EBT	Ball-End Type, 2-Flute For finishing FX-H-EBD	Long Neck Ball Type, 2-Flute WX-LN-EBD	SSBL200 CBN Super Speed Long Neck Ball End Mill	MACH225SF Short hank, for high-speed and high-hardness processing, ball end mill (for thermal insert)	SMB120 CBN Ball End Mill CBN Micro Ball for Ultra-Fine Machining	CBN 2-Flute Spiral Ball-End Mill SBBE-2	Ball End Mill Center Cut Spherical Design R 216.6 (Hardness 43 ≤ HRC ≤ 63)	SSPBL220 CBN Super Spiral Long Neck Ball End Mill	Single Cut Ball 70 End Mill DH-OCHB Type	2-Flutes Short-Shank Long-Neck Ball End Mills HSLB-S	TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade	TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model	TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model	XCP Coated Carbide Ball End Mill For Tempered Steel / High Hardness Steel Machining / 2-Flute / Stub Type	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Short Model	MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute / Regular Model	GS MILL Long Neck Hard Ball GSBNH2	X's Mill Geo Ball Long Shank 2GEOLSR	CBN Mold Finish Master BNBP	GS MILL Hard Ball GSBH	GS MILL Ball 2GSR	Mold Meister Ball 2MMR	X's Mill Geo Ball 2GEOR	Ball End Type, 2-Flute FX-MG-EBD-3	Ball End Type, 2-Flute CBN-EBD	Ball End Type, 2-Flute CBN-SXB	Ball End Type, 2-Flute FX-MG-EBD	Ball End Type, 2-Flute WX-EBD	Ball End Type, 2-Flute WXS-EBD
From	₹ 1,171.25		₹ 2,168.82	₹ 1,854.07	₹ 2,182.20	₹ 19,239.38	₹ 10,797.96	₹ 1,829.96	₹ 3,394.38	₹ 9,507.36	₹ 11,008.84	₹ 15,367.22	₹ 12,129.91	₹ 9,244.85	₹ 15,379.27	₹ 16,746.80	₹ 9,843.56	₹ 3,793.51	₹ 16,016.80	₹ 3,121.13	₹ 22,997.73	₹ 14,967.69	₹ 12,070.96	₹ 17,937.35	₹ 6,815.16	₹ 1,830.54	₹ 5,879.24	₹ 3,566.73	₹ 3,991.73	₹ 1,320.00	₹ 1,074.55	₹ 1,254.00	₹ 2,882.15	₹ 6,920.98	₹ 28,086.85	₹ 6,542.71	₹ 7,636.31	₹ 15,674.47	₹ 5,931.73	₹ 10,043.13	₹ 35,727.35	₹ 19,114.84	₹ 9,890.44	₹ 3,557.78	₹ 3,134.53
Days to Ship	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more
Specifications	MR General Steel 2 Flutes S (Short)						High-Hardness Steel 2 Flutes																				TS High-Hardness Steel 2 Flutes	TS High-Hardness Steel 2 Flutes B (Stub)	TS High-Hardness Steel 3 Flutes		MR General Steel 2 Flutes S (Short)	MR General Steel 2 Flutes R (Regular)
R Size(mm)	0.05 ～ 3	0.1 ～ 3	0.05 ～ 3	0.05 ～ 3	0.05 ～ 3	0.1 ～ 1	0.3 ～ 1	0.03 ～ 6	1 ～ 6	0.5 ～ 8	0.2 ～ 0.5	3 ～ 6	0.1 ～ 2	0.5 ～ 6	3 ～ 10	1 ～ 6	0.5 ～ 6	0.1 ～ 3	0.05 ～ 1	0.1 ～ 3	0.01 ～ 0.05	0.1 ～ 3	0.5 ～ 8	0.1 ～ 1	-	0.1 ～ 3	1 ～ 5	0.3 ～ 3	0.5 ～ 3	0.5 ～ 12.5	0.1 ～ 10	0.2 ～ 8	0.1 ～ 3	0.5 ～ 15	0.2 ～ 1	0.2 ～ 6	5	0.5 ～ 6	0.5 ～ 15	0.2 ～ 1.5	3 ～ 6	0.2 ～ 1.5	0.5 ～ 15	0.6	0.75 ～ 8
Blade length (ℓ)(mm)	0.07 ～ 6	0.15 ～ 3.6	0.07 ～ 6	0.08 ～ 4.8	0.07 ～ 6	0.15 ～ 1.2	0.5 ～ 1.2	0.06 ～ 22	3 ～ 18	1 ～ 16	0.3 ～ 1	12 ～ 22	0.16 ～ 3.2	1 ～ 12	12 ～ 38	2 ～ 12	1 ～ 12	0.16 ～ 4.8	0.08 ～ 1.2	0.2 ～ 6	0.02 ～ 0.1	0.2 ～ 3.5	2 ～ 15	0.15 ～ 1.2	7.5 ～ 9	0.16 ～ 4.8	1 ～ 5	0.6 ～ 6	0.8 ～ 4.8	1 ～ 25	0.4 ～ 25	1.5 ～ 30	0.2 ～ 6	1.5 ～ 45	0.3 ～ 1.4	0.4 ～ 12	15	1.5 ～ 18	1.5 ～ 45	0.8 ～ 8	4 ～ 7	0.3 ～ 1.8	2.5 ～ 55	3	1.5 ～ 24
Underneck length (ℓ1)(mm)	0.2 ～ 60	0.3 ～ 18	0.3 ～ 50	0.3 ～ 60	0.2 ～ 50	0.5 ～ 5	1.5 ～ 5	-	-	20	1 ～ 10	-	1 ～ 30	2.5 ～ 30	-	20 ～ 85	2.5 ～ 30	0.5 ～ 50	0.3 ～ 10	0.5 ～ 15	-	-	20 ～ 61	0.9 ～ 20	24 ～ 36	0.5 ～ 20	5 ～ 10	-	20 ～ 50	2.2 ～ 50	-	-	-	10 ～ 100	1.2 ～ 5.5	0.6 ～ 7.5	-	-	3 ～ 80	-	20	1.2 ～ 6	-	-	3 ～ 8
Shank diameter (d)(mm)	4 ～ 6	-	4 ～ 6	3 ～ 6	4 ～ 6	4	4	4 ～ 12	4 ～ 12	4 ～ 16	6	5 ～ 11	6	6 ～ 12	6 ～ 20	6 ～ 16	6 ～ 12	4 ～ 6	4	4 ～ 6	4	6	6 ～ 16	-	-	4 ～ 6	6 ～ 10	6	4 ～ 8	4 ～ 25	4 ～ 20	4 ～ 16	4 ～ 6	4 ～ 32	4 ～ 6	4 ～ 12	10	4 ～ 12	4 ～ 32	3	6 ～ 12	4 ～ 6	4 ～ 25	4	4 ～ 16
Number of flutes(sheet)	2	2	2	2	2	2	2	2	4	2 ～ 4	2	2	2	2	2	3	2	2	2	2	1	2	2 ～ 4	2	4	2	2	2	3	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2	2
Overall Length (L)(mm)	50 ～ 110	52 ～ 70	45 ～ 120	45 ～ 120	45 ～ 120	50 ～ 52	50	50 ～ 110	50 ～ 110	57 ～ 140	54 ～ 57	120 ～ 160	50 ～ 100	50 ～ 80	90 ～ 160	70 ～ 160	50 ～ 80	45 ～ 120	50 ～ 53	35 ～ 45	50	50 ～ 60	75 ～ 150	51 ～ 53	-	35 ～ 50	50 ～ 90	40	70 ～ 110	40 ～ 180	50 ～ 150	50 ～ 140	45 ～ 120	80 ～ 230	50	50 ～ 110	100	50 ～ 120	50 ～ 200	40	90 ～ 110	45 ～ 50	50 ～ 180	50	50 ～ 140
work material	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[◎]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[○]	High Hardness Steel-HRC60[◎]
R Precision(μm)	±0.005	3 to -3 ～ 5 to -5	0.005～-0.005 ～ 0.01～-0.01	-0.005～0.005 ～ -0.002～0.002	0.005～-0.005	0.003～-0.003 ～ 0.005～-0.005	±0.005	-0.007～0.007 ～ -0.002～0.002	-0.01～0.01 ～ -0.005～0.005	-	-	-0.01～+0.01	-0.005～+0.005	-0.015～+0.015 ～ -0.01	-0.01～+0.01	-0.015～+0.015	-0.01～+0.01	-0.01～+0.01	0.005～-0.005	0.005～-0.005 ～ 0.01～-0.01	-	＋0.005～－0.005	-	-0.003 to 0.003	±8	±3 ～ ±5	±0.01	-0.005 ~ +0.001 ～ ±0.003	-0.007 ~ +0.003 ～ ±0.005	±5 ～ ±10	±0.005 ～ ±0.01	±0.005 ～ ±0.01	-	0～-0.04 ～ 0～-0.03	-	-	-0.01～+0.01	-0.003～+0.003	0～-0.04 ～ 0～-0.03	-0.01～+0.01	-0.01～+0.01	-0.005～+0.005	-0.01～+0.01	-0.01～+0.01	-0.01～+0.01 ～ -0.005～+0.005
Machining Application	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface	Curved surface	Curved surface / Engraving / R Groove	-	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove	Curved surface / Side / Engraving / R Groove
Coating	MRC	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Non-Coated	Non-Coated	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	Other	Other	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	TiAlN	Non-Coated	-	Other	Non-Coated	Other	-	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	MRC	MRC	TiAlN	TiAlN	-	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	Non-Coated	TiAlN	TiAlN	For High Hardness (Silicon Group)
Type	Long-Neck Ball	Ball	Long-Neck Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Tapered neck ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Long-Neck Ball	Ball	Ball	Ball	Ball	Long-Neck Ball	Ball	Long-Neck Ball	Ball	Ball	Tapered neck ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball	Ball

Loading...