Roughing End Mills (Carbide)

• You can add up to 6 items per a category to the compare list. Compare

  

  TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / short model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 66	6 ～ 20	4	57 ～ 104	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  OptiMill® SCM450 Composite Material End Mill (8 Flutes)

  MAPAL

  [Features]· By using multiple blades, it achieves high efficiency machining (high feed) of composite materials such as CFRP, etc.[Applications]· Work materials: Composites such as CFRP, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 20	16 ～ 45	-	6 ～ 20	8	60 ～ 104	-	-	-	-	-	Roughing

  From: ₹ 39,820.53
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill for Exotics and Roughing, Unequal Helix for SUS, Ti & Ni, Super Tough Mills Series 452/4527, Metric

  OSG

  End mill for exotics and roughing, Super tough mills, Metric sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  -	-	-	6 ～ 25	4	57 ～ 121	-	-	-	-	-	Roughing

  From: ₹ 2,273.00
  Days to Ship: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  End Mill for Exotics and Roughing, Rough End Mills Series 483, Metric

  OSG

  End mill for exotics and roughing, Rough mills, Metric sizes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  -	-	-	6 ～ 25	3 ～ 6	57 ～ 102	-	-	-	-	-	Roughing

  From: ₹ 2,180.00
  Days to Ship: 4 Day(s)

  4 Day(s)

• You can add up to 6 items per a category to the compare list. Compare

  

  DIA Coated Twill Cut Router (Multi-Blade / Bar Type)

  OSG

  [Features]· CFRP Router Series[Applications]· Work Material: Composite Material[Material]· Cemented CarbideManufacturer Standard ProductBottom blade shape: Bar type with multiple flutes

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 10	19 ～ 32	-	6 ～ 10	Bur End	60 ～ 80	-	-	-	Dia Coat	-	Square

  From: ₹ 21,997.22
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • 4 Flutes
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage p...Readmore

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Popular DLC coated type of aluminum roughing

  • DLC
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○] / Resin[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	DLC	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model

  MISUMI

  Significantly reduces the roughing time of aluminum

  • Non-Coated
  • Aluminum
  • 3 Flutes
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 70	6 ～ 20	3	57 ～ 100	Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	Non-Coated	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  VAC Series Carbide Roughing End Mill

  MISUMI

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now [Features]・High-speed rotation is possible by adopting a 45° helix. ・Using a fine pitch nick, the surface roughness after processing is also excellent. ・The conductivity is minimal. 《Additional machining》・Addit...Readmore

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 12	8 ～ 30	-	6 ～ 12	3 ～ 4	50 ～ 80	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Router for CFRP Herring Bone Type_DIA-HBC4

  OSG

  Standard in-stock item, sold by designated agencies.[Features]· A router that adopts a diamond coating with excellent abrasion resistance.· 4 base blades

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 10	15 ～ 25	-	6 ～ 10	4	65 ～ 75	-	Standard torsion (30-40°)	Plane / Side / Inclined Cuts	Dia Coat	With Lead	Roughing

  From: ₹ 17,850.45
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCT S Cut End Mill MX30

  ASAHI TOOLS

  New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 40	40 ～ 80	-	20 ～ 42	4	130 ～ 180	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Weak torsion (15 to 25˚)	Side / Groove	Non-Coated	C plane	Roughing

  From: ₹ 41,537.64
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated

  OKAZAKI SEIKO

  High torsion roughing endmill ideal for roughing aluminum material.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	3	50 ～ 105	Aluminum[◎] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove	Non-Coated	C plane	Roughing

  From: ₹ 7,561.24
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRL Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 19	33 ～ 70	-	8 ～ 20	3	95 ～ 150	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: ₹ 23,655.38
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Solid End Mill Roughing

  SANDVIK

  Unique shape exhibits high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	9 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	general steel[○] / Stainless Steel[○] / Cast Iron[○]	Standard torsion (30-40°)	Groove	TiCN	-	Roughing

  From: ₹ 9,996.25
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Fiber Cutter With/Without Coating CSFRP

  EIKOSHA

  [Features]· Ideal for machining carbon fiber and glass fiber.· Without base blade.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	4 ～ 20	6 ～ 16	50 ～ 110	-	Weak torsion (15 to 25˚)	Plane / Side / Countersinking	Non-Coated	-	Roughing

  From: ₹ 5,310.09
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide Solid Fiber Cutter with End Cutting Edge With/Without Coating CSFRPE

  EIKOSHA

  [Features]· Ideal for machining carbon fiber and glass fiber.· With base blade.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	10 ～ 45	-	4 ～ 20	Outer Diameter 6/Bottom Blade 3 ～ Outer Diameter 16/Bottom Blade 8	50 ～ 110	-	Weak torsion (15 to 25˚)	Plane / Side / Groove / Countersinking	Non-Coated	Sharp Edge	Roughing

  From: ₹ 5,548.51
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  

  

  XAC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  Strongly supports the cost reduction of roughing with the limited special price for standard sizes

  • TiAlN
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	16 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	TiAlN	C plane	Roughing

  From: ₹ 3,336.78
  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	15 ～ 45	20 ～ 92	6 ～ 20	3 ～ 4	60 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, fine pitch / long regular model

  MISUMI

  [Features]·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·Long shank type ideal for deep cavity milling·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage procedures, range of services, prices, etc.

  • TS
  • General Steel
  • R (Regular)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	15 ～ 45	20 ～ 95	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	Micro R	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / short model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage p...Readmore

  • TS
  • General Steel
  • S (Short)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	10 ～ 38	17 ～ 72	6 ～ 20	3 ～ 4	60 ～ 110	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  TSC series carbide roughing end mill, 45° spiral / fine pitch / long model

  MISUMI

  [Features]·High-speed rotation processing is possible by adopting 45° helix angle·Roughing end mill capable of coarse and middle to coarse machining with fine pitch nick·It has coating with high oxidation resistance and high hardness, and achieves a long service lifespan. Effective in high-speed machining and dry machining as coating properties·Can be regrinded. Please refer to the page dedicated to "regrinding service" for usage p...Readmore

  • TS
  • General Steel
  • L (Long)

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	25 ～ 65	30 ～ 112	6 ～ 20	3 ～ 4	100 ～ 150	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Powerful Torsion (45°-60°)	Plane / Side / Groove / Inclined Cuts	For High Hardness (Silicon Group)	C plane	Roughing

  Days to Ship: 6 Day(s) or more

  6 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  GSX MILL Roughing 2.5D GSXRE-2.5D

  NACHI(FUJIKOSHI)

  Improved fracture resistance when used at high speeds for high efficiency. The GSX coating further improves heat resistance and abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  10 ～ 12	25 ～ 30	-	10 ～ 12	4	70 ～ 75	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Standard torsion (30-40°)	Plane / Side / Groove / Inclined Cuts	For General Steels (AlCrN, etc.)	With Lead	Roughing

  From: ₹ 10,547.20
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Router for CFRP Fine Pitch with Nick_DIA-BNC

  OSG

  A router that adopts a diamond coating with excellent abrasion resistance.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 12	12 ～ 36	-	4 ～ 12	6 ～ 14	62 ～ 94	Resin[◎]	No torsion	Plane / Side / Inclined Cuts	Dia Coat	With Lead	Roughing

  From: ₹ 18,643.38
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  WX Coated Roughing_WX-RESF

  OSG

  As the corrugated blade shape reduces cutting power, large cutting depth is possible. Also resilient to chatter, it is possible to improve the efficiency of roughing.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 25	16 ～ 45	-	8 ～ 25	4 ～ 6	60 ～ 120	general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Plane / Side / Inclined Cuts	TiAlN	C plane	Roughing

  From: ₹ 13,253.65
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SCT Long S-Cut End Mill MX30

  ASAHI TOOLS

  JIS usage classification symbol. Uses a tip material equivalent to M30 for roughing. Improves rough machining performance for nonferrous metals, cast iron, steel, etc.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  20 ～ 40	60 ～ 120	-	20 ～ 42	4	150 ～ 220	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Weak torsion (15 to 25˚)	Side / Groove	Non-Coated	C plane	Roughing

  From: ₹ 50,188.78
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  STN Tornado End Mill MA

  ASAHI TOOLS

  Ideal for side and groove machining of castings, carbon steel, stainless steel, and hard-to-cut material (up to HRC 65). Capable of radial cutting depth of 1/8 D in semi-finishing and finishing of high-hardness steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  3 ～ 20	3 ～ 80	-	6 ～ 20	4 ～ 8	45 ～ 140	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○]	Standard torsion (30-40°)	Side / Groove	TiN	With Lead	Square

  From: ₹ 5,952.62
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat

  OKAZAKI SEIKO

  Its unique roughing shape and the effect of OK coating enable heavy cutting and high speed machining.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 25	12 ～ 45	-	4 ～ 25	4	50 ～ 120	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Weak torsion (15 to 25˚)	Plane / Side / Groove	TiAlN	C plane	Roughing

  From: ₹ 4,846.27
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated

  OKAZAKI SEIKO

  The weld prevention effect of the pure DLC coating provides an astonishingly long service life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	15 ～ 45	-	6 ～ 20	3	50 ～ 105	Aluminum[◎] / Copper[◎]	Standard torsion (30-40°)	Plane / Side / Groove	DLC	C plane	Roughing

  From: ₹ 12,195.53
  Days to Ship: 9 Day(s) or more

  9 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS-LS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 19	11 ～ 31	-	6 ～ 18	3	80 ～ 150	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: ₹ 13,700.80
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 22	9 ～ 33	-	5 ～ 20	3	100 ～ 250	Aluminum[◎]	Standard torsion (30-40°)	Side	Non-Coated	Sharp Edge	Roughing

  From: ₹ 9,824.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Machining AL-OCRS Type

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  7 ～ 19	17 ～ 40	-	8 ～ 20	3	65 ～ 115	Aluminum[◎]	Standard torsion (30-40°)	Side / Groove	Non-Coated	Sharp Edge	Roughing

  From: ₹ 11,034.27
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  One Cut Rough DZ-OCRS

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  4 ～ 25	8 ～ 50	-	6 ～ 25	3 ～ 4	55 ～ 130	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]	Weak torsion (15 to 25˚)	Side / Groove	TiAlN	-	Roughing

  From: ₹ 16,591.42
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill Regular 3-Flute 3127

  GUHRING

  Roughing endmill dedicated for aluminum.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 25	-	-	6 ～ 25	3	57 ～ 121	-	Standard torsion (30-40°)	-	-	-	Roughing

  From: ₹ 5,984.38
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill Regular 4-Flute 3723

  GUHRING

  Supports a wide range of high-speed rough machining from general steel to stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 25	-	-	6 ～ 25	4	57 ～ 121	-	Standard torsion (30-40°)	-	-	-	Roughing

  From: ₹ 8,825.24
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill Regular 4-Flute for High Hardness Steel 3682

  GUHRING

  Capable of rough machining of hardened materials up to hardness of 56 HRC.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	-	-	6 ～ 20	4	57 ～ 104	-	Weak torsion (15 to 25˚)	-	-	-	Roughing

  From: ₹ 12,000.95
  Days to Ship: 23 Day(s) or more

  23 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)

  KYOCERA

  ·Roughing corrugated cutting edge·For coarse machining, the repertoire includes 3, 4, and 5 flutes.The sine curve cutting edge reduces cutting force.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 8	13 ～ 16	-	6 ～ 8	3	57 ～ 63	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Weak torsion (15 to 25˚)	Plane / Side / Groove	TiAlN	-	Roughing

  From: ₹ 6,624.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  CoroMill Plura, Carbide Shoulder Grinding End Mill

  SANDVIK

  Unique shape exhibits high performance

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 25	10 ～ 32	24 ～ 75	6 ～ 25	3	57 ～ 135	Aluminum[○] / Copper[○]	Standard torsion (30-40°)	Groove	Non-Coated	-	Roughing

  From: ₹ 8,165.29
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Roughing End Mill for Aluminum Processing, Regular Flute Length with Chamfered Corner AL-OCRS

  DIJET

  Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 25	13 ～ 51	-	6 ～ 25	3	55 ～ 130	Aluminum[◎]	Standard torsion (30-40°)	Side / Groove	Non-Coated	Sharp Edge	Roughing

  From: ₹ 11,535.22
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF

  OSG

  [Features]· Non-uniform split shape of the base blade and unequal lead shape of the outer peripheral blade achieve "quiet but heavy cutting".· Work material: General steel, tempered steel, stainless steel, cast iron, copper, aluminum, titanium

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20H	13 ～ 38	-	6 ～ 20	3 ～ 4	60 ～ 105	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	Variable lead	Plane / Side / Inclined Cuts	-	C plane	Roughing

  From: ₹ 10,056.53
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated

  OKAZAKI SEIKO

  A multi-purpose roughing end mill with the enhanced vertical feed performance of the Zakkuri Mill.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	12 ～ 40	15 ～ 36	6 ～ 20	3	50 ～ 105	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]	Standard torsion (30-40°)	Side / Groove	TiAlN	-	Roughing

  From: ₹ 5,375.35
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  SPEED/T 3/4 Flute 40°Roughing

  Poulten&Graf

  [Features]· Fine pitch 40° torsion angle is ideal for roughing HRC 45 or below mild steels at a low cost.· Low cutting depth and long operating life.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  5 ～ 20	13 ～ 45	-	6 ～ 20	3 ～ 4	50 ～ 100	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]	Standard torsion (30-40°)	Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-	Roughing

  From: ₹ 3,941.80
  Days to Ship: 7 Day(s) or more

  7 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  Ayame Router (multi-blade, bar type)

  OSG

  [Features]· CFRP Router Series[Applications]· Work Material: Composite Material[Material]· Cemented Carbide

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 10	19 ～ 32	-	6 ～ 10	Bur End	60 ～ 80	-	-	-	Non-Coated	-	Square

  From: ₹ 5,414.18
  Days to Ship: 5 Day(s) or more

  5 Day(s) or more

• You can add up to 6 items per a category to the compare list. Compare

  

  OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)

  MAPAL

  [Features]· "Rough & Finish" design supports rough to medium finishing using a single tool.· The cutting edge is chamfered (excluding ø6) for higher rigidity.[Applications]· Work materials: Carbon steel, alloy steel, cast iron, stainless steel.

  Blade diameter (D)(φ)	Blade length (ℓ)(mm)	Underneck length (ℓ1)(mm)	Shank diameter (d)(mm)	Number of flutes(sheet)	Overall Length (L)(mm)	work material	Torsion Angle (θ)	Machining Application	Coating	Blade tip shape	Type
  6 ～ 20	13 ～ 38	-	6 ～ 20	3 ～ 4	57 ～ 104	-	-	-	-	-	Roughing

  From: ₹ 6,762.95
  Days to Ship: 8 Day(s) or more

  8 Day(s) or more

Brand
Product Series
From
Days to Ship
Specifications
Blade diameter (D)(φ)
Blade length (ℓ)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
Number of flutes(sheet)
Overall Length (L)(mm)
work material
Torsion Angle (θ)
Machining Application
Coating
Blade tip shape
Type

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MAPAL	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	ASAHI TOOLS	OKAZAKI SEIKO	DIJET	SANDVIK	EIKOSHA	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	GUHRING	GUHRING	GUHRING	KYOCERA	SANDVIK	DIJET	OSG	OKAZAKI SEIKO	Poulten&Graf	OSG	MAPAL
Product Series	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	TSC series carbide roughing end mill, fine pitch / short model	OptiMill® SCM450 Composite Material End Mill (8 Flutes)	End Mill for Exotics and Roughing, Unequal Helix for SUS, Ti & Ni, Super Tough Mills Series 452/4527, Metric	End Mill for Exotics and Roughing, Rough End Mills Series 483, Metric	DIA Coated Twill Cut Router (Multi-Blade / Bar Type)	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	VAC Series Carbide Roughing End Mill	Router for CFRP Herring Bone Type_DIA-HBC4	SCT S Cut End Mill MX30	SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated	Roughing End Mill for Aluminum Machining AL-OCRL Type	CoroMill Plura, Carbide Solid End Mill Roughing	Carbide Solid Fiber Cutter With/Without Coating CSFRP	Carbide Solid Fiber Cutter with End Cutting Edge With/Without Coating CSFRPE	XAC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	GSX MILL Roughing 2.5D GSXRE-2.5D	Router for CFRP Fine Pitch with Nick_DIA-BNC	WX Coated Roughing_WX-RESF	SCT Long S-Cut End Mill MX30	STN Tornado End Mill MA	SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat	SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated	Roughing End Mill for Aluminum Machining AL-OCRS-LS Type	Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type	Roughing End Mill for Aluminum Machining AL-OCRS Type	One Cut Rough DZ-OCRS	Roughing End Mill Regular 3-Flute 3127	Roughing End Mill Regular 4-Flute 3723	Roughing End Mill Regular 4-Flute for High Hardness Steel 3682	High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)	CoroMill Plura, Carbide Shoulder Grinding End Mill	Roughing End Mill for Aluminum Processing, Regular Flute Length with Chamfered Corner AL-OCRS	Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF	SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated	SPEED/T 3/4 Flute 40°Roughing	Ayame Router (multi-blade, bar type)	OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)
From			₹ 39,820.53	₹ 2,273.00	₹ 2,180.00	₹ 21,997.22						₹ 17,850.45	₹ 41,537.64	₹ 7,561.24	₹ 23,655.38	₹ 9,996.25	₹ 5,310.09	₹ 5,548.51	₹ 3,336.78					₹ 10,547.20	₹ 18,643.38	₹ 13,253.65	₹ 50,188.78	₹ 5,952.62	₹ 4,846.27	₹ 12,195.53	₹ 13,700.80	₹ 9,824.80	₹ 11,034.27	₹ 16,591.42	₹ 5,984.38	₹ 8,825.24	₹ 12,000.95	₹ 6,624.18	₹ 8,165.29	₹ 11,535.22	₹ 10,056.53	₹ 5,375.35	₹ 3,941.80	₹ 5,414.18	₹ 6,762.95
Days to Ship	6 Day(s) or more	6 Day(s) or more	8 Day(s) or more	4 Day(s)	4 Day(s)	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	7 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	6 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	5 Day(s) or more	9 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	23 Day(s) or more	5 Day(s) or more	5 Day(s) or more	7 Day(s) or more	5 Day(s) or more	7 Day(s) or more	7 Day(s) or more	5 Day(s) or more	8 Day(s) or more
Specifications	TS General Steel R (Regular)	TS General Steel 4 Flutes S (Short)					TS General Steel 4 Flutes L (Long)	TS General Steel R (Regular)	DLC Aluminum 3 Flutes R (Regular)	Non-Coated Aluminum 3 Flutes R (Regular)									TiAlN General Steel R (Regular)	TS General Steel R (Regular)	TS General Steel R (Regular)	TS General Steel S (Short)	TS General Steel L (Long)
Blade diameter (D)(φ)	6 ～ 20	5 ～ 20	4 ～ 20	-	-	6 ～ 10	6 ～ 20	3 ～ 20	5 ～ 20	5 ～ 20	3 ～ 12	6 ～ 10	20 ～ 40	6 ～ 20	7 ～ 19	6 ～ 20	3 ～ 20	3 ～ 20	6 ～ 20	3 ～ 20	5 ～ 20	5 ～ 20	6 ～ 20	10 ～ 12	4 ～ 12	7 ～ 25	20 ～ 40	3 ～ 20	5 ～ 25	6 ～ 20	7 ～ 19	6 ～ 22	7 ～ 19	4 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	5 ～ 8	6 ～ 25	6 ～ 25	5 ～ 20H	5 ～ 20	5 ～ 20	6 ～ 10	6 ～ 20
Blade length (ℓ)(mm)	15 ～ 45	10 ～ 38	16 ～ 45	-	-	19 ～ 32	25 ～ 65	15 ～ 45	15 ～ 45	15 ～ 45	8 ～ 30	15 ～ 25	40 ～ 80	15 ～ 45	33 ～ 70	9 ～ 38	10 ～ 45	10 ～ 45	16 ～ 38	15 ～ 45	15 ～ 45	10 ～ 38	25 ～ 65	25 ～ 30	12 ～ 36	16 ～ 45	60 ～ 120	3 ～ 80	12 ～ 45	15 ～ 45	11 ～ 31	9 ～ 33	17 ～ 40	8 ～ 50	-	-	-	13 ～ 16	10 ～ 32	13 ～ 51	13 ～ 38	12 ～ 40	13 ～ 45	19 ～ 32	13 ～ 38
Underneck length (ℓ1)(mm)	20 ～ 95	17 ～ 66	-	-	-	-	30 ～ 112	20 ～ 92	20 ～ 70	20 ～ 70	-	-	-	-	-	-	-	-	-	20 ～ 92	20 ～ 95	17 ～ 72	30 ～ 112	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	24 ～ 75	-	-	15 ～ 36	-	-	-
Shank diameter (d)(mm)	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 25	6 ～ 25	6 ～ 10	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 12	6 ～ 10	20 ～ 42	6 ～ 20	8 ～ 20	6 ～ 20	4 ～ 20	4 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 20	10 ～ 12	4 ～ 12	8 ～ 25	20 ～ 42	6 ～ 20	4 ～ 25	6 ～ 20	6 ～ 18	5 ～ 20	8 ～ 20	6 ～ 25	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 8	6 ～ 25	6 ～ 25	6 ～ 20	6 ～ 20	6 ～ 20	6 ～ 10	6 ～ 20
Number of flutes(sheet)	3 ～ 4	4	8	4	3 ～ 6	Bur End	4	3 ～ 4	3	3	3 ～ 4	4	4	3	3	3 ～ 4	6 ～ 16	Outer Diameter 6/Bottom Blade 3 ～ Outer Diameter 16/Bottom Blade 8	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	4	6 ～ 14	4 ～ 6	4	4 ～ 8	4	3	3	3	3	3 ～ 4	3	4	4	3	3	3	3 ～ 4	3	3 ～ 4	Bur End	3 ～ 4
Overall Length (L)(mm)	100 ～ 150	57 ～ 104	60 ～ 104	57 ～ 121	57 ～ 102	60 ～ 80	100 ～ 150	60 ～ 130	57 ～ 100	57 ～ 100	50 ～ 80	65 ～ 75	130 ～ 180	50 ～ 105	95 ～ 150	57 ～ 104	50 ～ 110	50 ～ 110	57 ～ 104	60 ～ 130	100 ～ 150	60 ～ 110	100 ～ 150	70 ～ 75	62 ～ 94	60 ～ 120	150 ～ 220	45 ～ 140	50 ～ 120	50 ～ 105	80 ～ 150	100 ～ 250	65 ～ 115	55 ～ 130	57 ～ 121	57 ～ 121	57 ～ 104	57 ～ 63	57 ～ 135	55 ～ 130	60 ～ 105	50 ～ 105	50 ～ 100	60 ～ 80	57 ～ 104
work material	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	-	-	-	-	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	Aluminum[◎] / Copper[○] / Resin[○]	Aluminum[◎] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○]	-	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	Aluminum[◎] / Copper[○]	Aluminum[◎]	general steel[○] / Stainless Steel[○] / Cast Iron[○]	-	-	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Cast Iron[○] / Aluminum[○] / Copper[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Resin[◎]	general steel[○/◎] / Quenched and tempered steel[○/◎] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○]	general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / Stainless Steel[◎] / Cast Iron[○]	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○]	Aluminum[◎] / Copper[◎]	Aluminum[◎]	Aluminum[◎]	Aluminum[◎]	general steel[◎] / Quenched and tempered steel[◎] / Cast Iron[◎]	-	-	-	general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎]	Aluminum[○] / Copper[○]	Aluminum[◎]	general steel[○/◎] / Quenched and tempered steel[○] / Stainless Steel[○/◎] / Cast Iron[○/◎] / Aluminum[○] / Titanium[○/◎] / Copper[○]	general steel[○] / Quenched and tempered steel[○] / Stainless Steel[○]	general steel[○] / Quenched and tempered steel[○] / Cast Iron[○]	-	-
Torsion Angle (θ)	Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	-	-	-	-	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	Standard torsion (30-40°)	-	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Powerful Torsion (45°-60°)	Powerful Torsion (45°-60°)	Standard torsion (30-40°)	No torsion	Standard torsion (30-40°) / Powerful Torsion (45°-60°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Weak torsion (15 to 25˚)	Weak torsion (15 to 25˚)	Standard torsion (30-40°)	Standard torsion (30-40°)	Variable lead	Standard torsion (30-40°)	Standard torsion (30-40°)	-	-
Machining Application	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	-	-	-	-	Plane / Side / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Plunging (Z feed) / Inclined Cuts	Plane / Side / Inclined Cuts	Side / Groove	Plane / Side / Groove	Side	Groove	Plane / Side / Countersinking	Plane / Side / Groove / Countersinking	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Groove / Inclined Cuts	Plane / Side / Inclined Cuts	Plane / Side / Inclined Cuts	Side / Groove	Side / Groove	Plane / Side / Groove	Plane / Side / Groove	Side	Side	Side / Groove	Side / Groove	-	-	-	Plane / Side / Groove	Groove	Side / Groove	Plane / Side / Inclined Cuts	Side / Groove	Side / Groove / Plunging (Z feed) / Inclined Cuts	-	-
Coating	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	-	-	-	Dia Coat	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	DLC	Non-Coated	-	Dia Coat	Non-Coated	Non-Coated	Non-Coated	TiCN	Non-Coated	Non-Coated	TiAlN	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For High Hardness (Silicon Group)	For General Steels (AlCrN, etc.)	Dia Coat	TiAlN	Non-Coated	TiN	TiAlN	DLC	Non-Coated	Non-Coated	Non-Coated	TiAlN	-	-	-	TiAlN	Non-Coated	Non-Coated	-	TiAlN	-	Non-Coated	-
Blade tip shape	C plane	Micro R	-	-	-	-	Micro R	C plane	Micro R	Micro R	-	With Lead	C plane	C plane	Sharp Edge	-	-	Sharp Edge	C plane	Micro R	Micro R	C plane	C plane	With Lead	With Lead	C plane	C plane	With Lead	C plane	C plane	Sharp Edge	Sharp Edge	Sharp Edge	-	-	-	-	-	-	Sharp Edge	C plane	-	-	-	-
Type	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Roughing	Square	Roughing

Brand
Product Series

	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare	You can add up to 6 items per a category to the compare list.Compare
Brand	MISUMI	MISUMI	MAPAL	OSG	OSG	OSG	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	OSG	ASAHI TOOLS	OKAZAKI SEIKO	DIJET	SANDVIK	EIKOSHA	EIKOSHA	MISUMI	MISUMI	MISUMI	MISUMI	MISUMI	NACHI(FUJIKOSHI)	OSG	OSG	ASAHI TOOLS	ASAHI TOOLS	OKAZAKI SEIKO	OKAZAKI SEIKO	DIJET	DIJET	DIJET	DIJET	GUHRING	GUHRING	GUHRING	KYOCERA	SANDVIK	DIJET	OSG	OKAZAKI SEIKO	Poulten&Graf	OSG	MAPAL
Product Series	TS coated carbide roughing end mill, 45°spiral, fine pitch / long shank, regular model	TSC series carbide roughing end mill, fine pitch / short model	OptiMill® SCM450 Composite Material End Mill (8 Flutes)	End Mill for Exotics and Roughing, Unequal Helix for SUS, Ti & Ni, Super Tough Mills Series 452/4527, Metric	End Mill for Exotics and Roughing, Rough End Mills Series 483, Metric	DIA Coated Twill Cut Router (Multi-Blade / Bar Type)	TSC series carbide roughing end mill, fine pitch / long model	TSC series carbide roughing end mill, 45° spiral / fine pitch / regular model	DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model	VAC Series Carbide Roughing End Mill	Router for CFRP Herring Bone Type_DIA-HBC4	SCT S Cut End Mill MX30	SRE3 Roughing End Mill for Aluminum, 3-Flute, Non-Coated	Roughing End Mill for Aluminum Machining AL-OCRL Type	CoroMill Plura, Carbide Solid End Mill Roughing	Carbide Solid Fiber Cutter With/Without Coating CSFRP	Carbide Solid Fiber Cutter with End Cutting Edge With/Without Coating CSFRPE	XAC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / regular model	TSC series carbide roughing end mill, fine pitch / long regular model	TSC series carbide roughing end mill, 45° spiral / fine pitch / short model	TSC series carbide roughing end mill, 45° spiral / fine pitch / long model	GSX MILL Roughing 2.5D GSXRE-2.5D	Router for CFRP Fine Pitch with Nick_DIA-BNC	WX Coated Roughing_WX-RESF	SCT Long S-Cut End Mill MX30	STN Tornado End Mill MA	SPSRC4A SP Series Roughing End Mill 4-Flute OK Coat	SRE3D Roughing End Mill for Aluminum, 3-Flute, Pure DLC-Coated	Roughing End Mill for Aluminum Machining AL-OCRS-LS Type	Roughing End Mill for Aluminum Machining AL-OCRS-XLS Type	Roughing End Mill for Aluminum Machining AL-OCRS Type	One Cut Rough DZ-OCRS	Roughing End Mill Regular 3-Flute 3127	Roughing End Mill Regular 4-Flute 3723	Roughing End Mill Regular 4-Flute for High Hardness Steel 3682	High Chip Flow Performance Wave Shaped Blade for Ruffing 3RDSM, 4RDSM, 5RDSM (Medium)	CoroMill Plura, Carbide Shoulder Grinding End Mill	Roughing End Mill for Aluminum Processing, Regular Flute Length with Chamfered Corner AL-OCRS	Carbide End Mills Roughing Fine Pitch Silent Type_SI-WC-RESF	SPSRD3ZA SP Series Roughing Mill 3 Flutes / OK Coated	SPEED/T 3/4 Flute 40°Roughing	Ayame Router (multi-blade, bar type)	OptiMill® Carbide Rough & Finish End Mill (Multi Fluted)

Loading...