Square Connectors（Connection direction：Straight Page3）

MR Vertical/Horizontal Dual Hooded Connector

MISUMI

For Vertical and Horizontal Dual-use MR Hood

CAD ：

2D

IEEE1284 Half Pitch EMI Countermeasure Press-fit Male Connector

MISUMI

High-speed Transfer Supporting Pressure Welding Half-pitch I/O Connector

• For Signal
• PLC
• Motor
• EMI Countermeasure
• SCSI
• Pressure Welding
• Gold Plated
• Screw Lock
• One-Touch Lock

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Solder
• Gold Plated
• Screw Lock

HKP Series

HONDA TSUSHIN KOGYO

2.54 mm pitch, straight, right angle through hole type connector.

[Features]
· Based on our original design, the contacts have provide highly reliable contact.
· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
· A UL-certified product is used as an insulator.
· Reworking wiring mistakes is also simplified using the removal tool.
▪ Mating with FFC, MFC, HSC, DIC series is supported

MR Series Case

HONDA TSUSHIN KOGYO

Case for the MR series.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

1.27‑mm Pitch Two-Piece Connectors, HIF6 Series

HIROSE ELECTRIC

Board-to-board and board-to-cable connection variations available. Uses a flat-type cable with 1.27-mm pitch, so it can be used with each type of connector.

[Features]
・Product variation: connection methods include board-to-board model and cable pressure connection.
・Wide range of use: using flat-type cable with 1.27-mm pitch, it can be used with HIF2E, HIF3B, HIF5, etc.
・Compatible cables: AWG#28 flat cable (7/0.127 mm, outer diameter 0.8 - 1.0 mm).
・Construction that prevents mis-insertion: mis-insertion prevention guide prevents accidental insertion.

3.3 mm Pitch, Compact Circuit Board-To-Cable Connector For Internal Power Supply, DF33 Series

HIROSE ELECTRIC

It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.

• Volume Discount

5 mm Pitch, Connector With Potting Capability For Compact Secondary Power Supply, DF5 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

Connector with lock for board-to-cable connection, with 5-mm pitch. Supports 8 maximum amperes. · Supports potting, and is ideal for connecting internal power supplies in equipment.

[Features]
· Potting is supported: Enables potting up to 9 mm, and is low-profile with a mounting height of 22.5 mm.
· Prevents incorrect insertion: A complete prevention mechanism guards against reverse entry and insertion into opposite poles during the coupling of pin headers and sockets.
· Solder cracking protection: Glass-fiber reinforced resin is utilized for the pin header case, as a measure for protecting against solder cracking caused by thermal contraction.
· Prevents reverse entry into board: Added guide posts on pin headers prevent reverse board entry.
· Full lock mechanism: Equipped with an outer-lock type full-lock mechanism.
· 8 A current rating: Can carry a maximum current of 8 Amperes.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

D-Sub Connector Plug Case (Product With EMI Measures), CTH Series

HIROSE ELECTRIC

These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.

[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.

Half-Pitch Multi-Function 2-Piece Connector, FX2 Series

HIROSE ELECTRIC

Combination offers various connections for board-to-board (stacking, horizontal, vertical) and ribbon cable connections.

• Volume Discount

Rack and Panel Connector, QR/P4 Series

HIROSE ELECTRIC

Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design with the insulation and the guide pin incorporated into a single body shape.

[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles on both sides (total: 4 poles) are distributed with 5.08-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.

High Withstand-Voltage (3,000 V) Board-To-Cable Connector With Lock, MDF51 Series

HIROSE ELECTRIC

This is a board-to-cable connector for a circuit board with high voltage resistance that corresponds to 3,000 V and has a lock included. One-push connection operation is available for improved mating operability.

[Features]
• Connector mating in just one push: Through the utilization of an inertia lock, mating work can be performed easily and with certainty in just one push.
• This also prevents accidents resulting from partial mating.
• Improved workability through vertical mating: Vertical mating and horizontal cable pulling improve workability in the field. drawer allows improved working in the field.
• Also, the mating surface has a large guiding area to make insert operations easier to perform.
• Designed with high voltage in mind: In addition to the terminal pitch, the design accumulates a large side surface distance, retaining performance in a high voltage environment.
• Header connector uplift prevention: Through solder connections to a total of 4 areas, the header side housing is fixed firmly in place, preventing and uplift from occurring.
• Solder implementation for uplift prevention: As a solder implementation method for preventing uplift, a kink structure is included in the terminals (P = 12 mm products only).
• UL, C-UL, and TUV certified products: Those products have obtained safety standard qualifications as connectors (P = 12 mm products only).

• Volume Discount

Small Rack and Panel Connector, QR/P15 Series

HIROSE ELECTRIC

Construction is divided into main connector unit / cable connection portion. 8, 24 (4 pins for power source) and 40-pin configuration.

[Features]
・Construction divided into main connector unit / cable connection portion: dividing the main body into main connector unit / cable connection portion parts enables product harness insertion from the back, increasing cable connection harness and set mounting workability.
・Sequence structure: the 40-pin type uses 2 pins for both terminals as a sequence terminal, taking safety into full consideration.
・Power supply compatibility: The 24-pin type incorporates power source terminal type.
・The power supply terminal connection uses MDF6 series 4-pin connectors (3.5-mm pitch, UL and CSA certified). Use of AWG16 ensures a 6A power supply capacity.
・Further, it is also possible to crimp using automated machines.
・Contact reliability: the main connector body contact portion uses a forked, double contact (tuning fork) shape in an effort to offer more stable contact.

In-Line Type Ribbon Cable Connector (HIF3B Relay Type)

HIROSE ELECTRIC

Can be used for cable-to-cable wiring inside machinery. The HIF3B series socket is also compatible with the HIF3A series.

IL-AG5 Series

JAPANAVIATION

[Features]
· Mechanical lock structure for secure mating.
· The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
· Unique housing structure.
· The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
· The double locking structure securely prevents contact dropout.
· The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
· The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
· Standard, and differently shaped incorrect insertion prevention types are available.
· The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
· Contact featuring highly reliable design.
· Box type, which is resilient to external effects such as deformation due to external forces.
· Two-ply spring structure with excellent contact element characteristics.
· The primary lance is on the inside of the contact provides horizontal insertion prevention.
· Structure prevents reverse, horizontal insertion during housing mounting.

MX23A Series, Contact

JAPANAVIATION

[Features]
· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.

• Volume Discount

MX36 Series

JAPANAVIATION

This is a small waterproof relay connector that was developed for automotive airbags.

[Features]
・Small waterproof wire-to-wire (relay) connector
· Contact tab size 025
・For wire-to-wire (relay) connections ・Small, waterproof crimping type
▪ For different types of air bags.

Miniature Low-Profile Interface DN Connector

HIROSE ELECTRIC

This small, multi-pin rectangular connector was developed to support the miniaturization of electronic devices, and thinner devices in particular

[Features]
· The terminal's wire connector is arrayed in a 2.54 mm grid that makes it easy to design circuits on a printed circuit board.
· The structure of the terminal is based on the manufacturer's SM series (D-sub connectors). This gives the terminal dependable quality.
· The single-action lock mechanism provides excellent operability.
· The cover case is designed to be thin and compact and features a low profile in order to meet the needs of high-density mounting. Mounting with 17.78 mm (700 mils) between circuit boards is possible.
· The cover case is made of an aluminum die casting offering good electromagnetic shielding characteristics. Combined with the connector's metal shell, the above configuration ensures that noise is reduced.
· The dip connector includes a snap (circuit board temporary joint) bracket.
· Pressure Connecting type supports connection of two wire types, AWG 26 and 28, via pressure welding, for use with standard 1.27-mm pitch cables.
· Crimping type can be used to perform crimping of AWG 26 to 28 wiring.
· Depending on the application, cable can be extracted in either the vertical or horizontal direction.

CRC Compact Robot Connector (51233)

MOLEX

A Molex connector which support currents of 7.0 to 15.0 A. Maximum number of pins: 50. Ideal for industrial robots and FA applications (compatible housings: 51239/54332)

One-Touch Lock D-Sub Hood

PROVERTHA

One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).

CD Common Use Crimp Type 10A / 50 to 250 V Insert

ILME

CD, general purpose crimped type, 10A / 50 - 250 V, Insert

[Features]
・CD general purpose crimped type.
・10A/50 - 250V.
▪ Insert

Half-Pitch 1.27-mm Interface Connector, DF02 Series

JAPANAVIATION

[Features]
・ The DF02 series is an interface connector standardized for the industrial equipment market and is half pitch (1.27) compatible.
・This product uses a lightweight resin material for the hood, and gives full consideration to EMI by using a nickel-plated shield.
・Further, the single-action lock format is used to provide excellent operability.

[Ilme Insert]CDD 10 A/250 V High Density Crimp Type

ILME

[Features]
・ This is a standard Series of general-purpose Ilme’s connectors.
・ It can be used with higher density and space-saving wiring.
・ Normally, it can be used up to 250 V, but it can be used at higher voltage (500 V) by reducing the number of contact pins used and
arranging it properly.

[Ilme Modular RJ45 Insert Contact]MIXO Type

ILME

[Features]
・ MIXO (Modular Unit System) is an epoch-making system that can combine not only general electric signals but also
power, digital signal, and air piping into 1 connector set by a combination of internal modules.
・ By combining various wiring that conventionally required separate wiring into one,
the manufacturer realized system simplification.
・ By reducing the number of contact points, it also helps prevent problems and reduces costs.

[Ilme Insert]CQE/CQEE 16 A/500 V General-Purpose Crimp Type

ILME

This is a standard Series of general-purpose Ilme’s connectors.
[Features]
・ It can be used with higher density and space-saving wiring.
・ Normally, it can be used up to 500 V, but it can be used at higher voltage (1,000 V) by reducing the number of contact pins used and
arranging it properly.

[Ilme Insert]CQ 6.5-40 A/50-400 V Crimp Type

ILME

Single-action, ultra-high density connector CQ Series.
[Features]
・ High reliability and operability are important for information wiring such as teach pendants and operation panels, which are frequently accessed by users.
・ The CQ Series, which uses the proven Ilme rectangular connector technology, improves usability and reliability.

17JE Series

DDK

[Features]
・ Solder cup type contact, hand-soldered connection connector.
・ They are available in 9, 15, 25 and 37 position configurations.
・ A stranded wire of 22 AWG or smaller is most suitable. (Use a soldering iron of 40 W or less when soldering)
・ The surface treatment of the metal shell is Ni plating, and the pin connector tip is rounded.
・ The cable/plug connection can be shielded by a metallized hood, which is effective as an EMI countermeasure.

Solderless D-Sub Connector IM-DS2059 (Dedicated for Single Wires)

WAGO

[Features]
・ No need for troublesome soldering work.
・ You can easily make a D-Sub cable by inserting a single wire.

EMI Countermeasure Solder/Machine Contact D-Sub Connector

MISUMI

Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Pressure-welded/Press Contact D-Sub Connector

MISUMI

Pressure Welding model allows wires to be connected easily and strain-relieving mounting demonstrates strong tensile force

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Pressure Welding
• Gold Plated

CAD ：

2D

Press-fit MIL Female Connector for Discrete Wires

MISUMI

Forms a pressure connection with bulk wires. Can be crimped easily with the dedicated tool

• UL
• CSA
• For Signal
• Pressure Welding
• Gold Plated

CAD ：

2D

MIL Connector PCB Straight Male Connector (BOX Model)

MISUMI

[Features]OMRON BOX type MIL straight male connector for circuit board mounting. It can be used for circuit boards of various factory automation equipment. Compared to circuit board mounting male connectors with levers, this connector is much smaller as it has no lever, making it very convenient for circuit board wiring in small devices. The widely used 2.54 mm pitch arrangement makes it compatible with commercially available universal circuit boards, etc.

• Volume Discount

• UL
• MIL
• Solder

CAD ：

2D

FCN Female Solder Connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Volume Discount

• For Signal
• PLC
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

Centronics Press-fit Spring-lock Connector (Female)

MISUMI

Labor-saving Pressure Welding Spring-lock Male Connector

• For Signal
• Connection in Boards
• Printer
• Pressure Welding
• Gold Plated

CAD ：

2D

Centronics EMI Countermeasure Spring-lock Press-fit Connector (Female)

MISUMI

57F Series Noise Countermeasure Product Centronics Female Connector

• Pressure Welding
• Gold Plated

CAD ：

2D

Han Waterproof DD-Model Connector (Crimped Connection)

MISUMI

Waterproof DD type connector manufactured by HARTING.
This is a high-density connector that can be incorporated into the hood or pedestal of the Han-E series.

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Caulking
• Insertion
• Silver-Plated

CAD ：

2D

HDC-CR (Frame)

WEIDMULLER

Frame for mounting CONCepT modules of standard, female and connector type 180°.

PCR Series Case

HONDA TSUSHIN KOGYO

This is a PCR series case.

[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.

PCS Series Cases

HONDA TSUSHIN KOGYO

Rectangular connector case for 1.27 mm pitch high density interface.
[Features]
·Vertical case for standard cable of PCS series
·Robust with metal shell + metal case, ideal for interfaces
·For FCC and other EMI countermeasures
[Applications]
·Various compact equipment such as office equipment, communication, measurement, factory automation.

1.78‑mm Pitch Rectangular Interface Connector QM Series

HIROSE ELECTRIC

Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.

[Features]
· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.

3A Compatible Ribbon Cable Connector, HIF4 Series

HIROSE ELECTRIC

Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.

[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.

[Features]
· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
• Made of strong ABS resin, so they are lightweight and sturdy.
• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
• 25-contact models are plug cases for modems as defined in JIS-C-6361.
• Easily incorporated using solder (HD type) or crimping (CD type).

D Terminal Connector DX*LM Series

HIROSE ELECTRIC

The D terminal connector is for digital broadcast devices.

[Features]
・Compatible with 3 mm panel thickness: by pushing in the mating portion 1.5 mm, it is compatible with 3 mm housing panel thickness.
・All possible measures against static electricity: through independent construction, the order of metallic shell to lock piece circuit board ensures that static is grounded out.
・Temporary circuit board fixing mechanism: a hood-shaped boss is installed on the lower connector portion and designed to fall forward when mounted on the circuit board to prevent wobbling.
・Enhanced circuit board fixing power: by soldering the enlarged lock piece, lead portion circuit board fixation is widely improved.
・A sufficiently wide safety margin is taken to prevent damage in the case that mishandling or unexpected force is applied.
・Conforms to EIAJ standard RC-5237: conforms to D terminal connector requirements for digital broadcast video and image signal connections.

Cover Case for HIF3B Series

HIROSE ELECTRIC

This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.

• Volume Discount

DeviceNet Compliant Connector, HR31 Series

HIROSE ELECTRIC

These are DeviceNet standard compliant connectors. These connectors simplify connection, reduce plug connector size, and promote differentiation compared to conventional parts.

[Features]
· DeviceNet compliant: The HR31 series is a FA network device standards product. (Terminal contacts: Gold-plated)
· Screw-lock: All screw-lock equipped products can be securely locked, allowing for increased locking strength.
· Snap-lock: The snap-lock feature creates a tactile click when mating.
· Commercially available tools can be used: These connectors are designed to be used with crimp tools conforming to JIS C 9711 standards.
· Designed to allow for removal by ⌀1 mm pin when improperly wired.
· Protected contacts: The crimped contacts are protected by the plug housing, reducing damage to the contacts during connection.