Square Connectors（Connection direction：Straight）

MIXO Modular Insert & Contact

ILME

[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.

Han E / EE Series Connector (Screw Type / Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Screw connection does not require special tools (Models are separated using "-" rather than spaces).

[Enclosure]C Type IP66, Rotary Lever Series

ILME

Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.

57 Series Soldering/DIP-Type Connector

DDK

A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.

[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).

Solder/Press Contact (Low Cost) D-Sub Connector

MISUMI

D-sub connector. Same product quality as Japanese products with dimple processing and plated pin finishing

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MR Straight Hooded Connector

MISUMI

Standard Straight MR Hood

CAD ：

2D

CD Type, Crimp Type Connector, CD Series

HIROSE ELECTRIC

A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.

• Volume Discount

D-Sub, D02, D02-M15 Series

JAPANAVIATION

A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.

[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.

Centronics Solder Spring-lock Connector (Male)

MISUMI

[Features]A Centronics male connector with a lineup of low-priced products. This is a connector that is used for connecting to a panel by attaching cable with solder.

• For Signal
• Connection between Boards
• Printer
• Solder

CAD ：

2D

Han Waterproof E-Model Connector (Screw Connection)

MISUMI

E Model Connector

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

MR Series

HONDA TSUSHIN KOGYO

Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.

[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided

Han A Series Connector (Screw Type Wire Connection)

HARTING

This is a compact type in the Han series. Space saving, and screw-type connection does not require special tools (Models are separated using "-" rather than spaces)..

Centronics Solder Spring-lock Connector (Panel Mountable Female)

MISUMI

[Features]A Centronics connector for fixing with a lineup of low-priced products. A connector that is mounted on a panel and used to connect with a male connector. Cable is connected by soldering.

• For Signal
• Connection between Boards
• Printer

CAD ：

2D

MR Female Connector

MISUMI

High-density MR female Connector

• Volume Discount

• For Signal
• Connection between Boards
• PLC
• Solder
• Silver-Plated

CAD ：

2D

Screw-lock/Press Contact D-sub Connector (with Integrated Terminal Block)

MISUMI

Hood with integrated screw model terminal that allows for repeated connecting with a single driver

• For Signal
• PLC
• EMI Countermeasure
• RS422
• RS232
• Screw Type
• Gold Plated
• Screw Lock

CAD ：

2D

2.5‑mm Pitch Connector For Discrete Wire Connection, HNC Series

HIROSE ELECTRIC

A connector for 2.5-mm pitch discrete wire connections. Thin type for right-angle mounting at a height of 4.8 mm. Includes mechanism for total locking and mis-insertion prevention.

[Features]
・Including total lock mechanism: total lock mechanism refers to the process of first releasing the lock on both sides before being able to remove the connector. This is effective in preventing accidental disconnection due cable pulling and other mistakes.
・Thin type: mount height when used at a right angle: 4.8 mm.
・Construction that prevents mis-insertion: Mis-insertion is prevented by the thin-type mechanism.
・Tin and gold plating variations: With the 2 options of tin and gold, the ideal metal may be selected depending on intended use.
・Further, there are settings available to provide a light feel even if tin plating is used.

Solder and Press Contact PLC D-Sub Connector

MISUMI

Used with Mitsubishi Electric Q series which is highly trusted in Japan

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

MR Vertical/Horizontal Dual Hooded Connector

MISUMI

For Vertical and Horizontal Dual-use MR Hood

CAD ：

2D

PCR Series

HONDA TSUSHIN KOGYO

1.27 mm pitch high density rectangular connector.
[Features]
·Robust and ideal for interfaces due to the metal shell and metal case.
·There is a wide range of contact numbers, 20 to 96 contacts for board-to-cable connection and 20 to 128 contacts for board-to-board connection.
·The housing guide mechanism allows parallel mating and prevents short circuits between adjacent contacts.
·For FCC and other EMI countermeasures.
·Live line connection (3 steps) is also available.
·Ideal for horizontal, parallel and vertical connections.
·Rated Voltage: 250 V AC (r.m.s.), rated current: 1 A / pin, contact resistance: 35 mΩ or less.
[Applications]
·Can be used for office equipment, factory automation equipment, measuring instruments, communication equipment, and various compact equipment.

Half Pitch Interface Connector, FI Series

HIROSE ELECTRIC

This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.

[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.

D-sub Connector, Crimped Housing

MISUMI

Crimp connection model that makes consistent workmanship quality possible

• Caulking

CAD ：

2D

Solder/Press-fit (High-density) D-Sub Connector

MISUMI

High-density D-sub Connector. Allows for high-density wiring without increasing wiring space

• For Signal
• Connection between Boards
• PLC
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

DF11 Series 2‑mm Grid Double-Row Connector (UL/CSA Standard Certified Product)【1-500 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
· Choose from gold or tin plating to match application. SMT-compatible products are also available.
· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
[Applications]
· For all types of OA equipment, including copy machines and printers.

• Volume Discount

D-Sub Connector (Solder Termination Type), HD Series

HIROSE ELECTRIC

A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.

[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.

• Volume Discount

HIF3B Series MIL Standard-Compliant Ribbon Cable Connector

HIROSE ELECTRIC

MIL standard-compliant rectangular ribbon cable connector.
[Features]
· HIF3B series products are developed to comply with the MIL standard and can be used in a wide range of applications.
· Compatible with HIF3 series.
· HIF3B series products are UL-listed connectors.
· Features a mechanism to prevent mis-insertion.
· A form in which inserting the guide key (polarity key) on the pin header side creates a convex section that fits into the concave section (polarity keyway) of the socket. (MIL standard)
· A form in which the mis-insertion prevention guide (polarity guide) on the socket side fits into the slot (polarity slot) on the pin header side.
· A system that embeds the polarizing key in the socket hole and guides it.
· A guide system in which the convex section on the socket side (HIF3A type) combines with the slot located in the center of the pin header side.
· The compatible wire (UL2651) is an AWG#28 ribbon cable (7-core/0.127 mm, jacket diameter of 0.9 ± 0.2 mm).
[Applications]
· A wide variety of models are available, enabling use with a wide range of equipment.

Small, Rectangular Interface Connector, 3200 Series

HIROSE ELECTRIC

This is an interface connector with an implementation height of 2.9 mm, a low profile, small size, and a lock included.

[Features]
• A receptacle connector board implementation surface with a height of the 2.9 mm.
• The contact pitch is an incredibly small 0.8 mm, and only a small area is required for mounting.
• This circuit board implementation method has a pitch of just 0.8 mm using the SMT method, so implementation is easy.
• This receptacle connector can also be prepared in an embossed packaging product format.
• This receptacle connector has a metal shell structure used for the mold cover, providing the ideal protective measures for ESD.
• A latch lock is applied to both sides for mating processes.
• This lock is implemented with the minimum space possible, and helps downsize your product set.
• Choose from 0.5, 1, or 1.5 mm for the circuit board thickness and support fittings length.
• The wire connection of this plug connector use a solder attachment type applicable to all types of wires.
• The number of pins available is either 8 or 10.

17JE Series Soldering Type Connector

DDK

17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.

CAD ：

2D

Han Waterproof A-Model Connector (Screw Connection)

MISUMI

A Model Connector

• UL
• CSA
• CE-Compliant
• For Power Supply
• For Signal
• Connection between Boards
• Screw Type
• Insertion
• Silver-Plated

CAD ：

2D

1 mm Pitch, 2-Row, Multi-Pin Circuit Board-to-Cable Connector, DF20 Series【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· This is a board-to-cable connector with dual-row, 1-mm pitch terminal pins.
· Contributing to a high-density board mounting.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

• Volume Discount

Discrete Wire for Connection, DF1E Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

A board-to-cable, cable-to-cable connector with a lock (2.5-mm pitch). The inner locking type mechanism prevents the connector from disconnecting due to impact.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

D-Sub Connectors - XM2/XM3

OMRON

These D-sub connectors are ideal for use with OA equipment interfaces.
[Features]
· Shielded connector for use in EMI countermeasures.
· The metalized plastic hood (Model XM2S) provides excellent noise protection.
· Multi-hole ferrite core equipped types (Model XM3B-F) are also available.
· Offers a space-saving design and superior noise protection at high frequencies.
· A wide variety of mounting brackets and grounding fixtures are available.
· Conforms to UL standards (File No. E103202) as standard (excluding the Model XM2S and some other products.)
[Applications]
· Small and tough-wearing structure with a metal shell

• Volume Discount

MIL connector IDC female connector (no lock)

MISUMI

[Features]This is a female connector that allows for batch IDC together with 1.27 mm pitch ribbon cable. It is a lead-free type that takes into consideration the global environment. A standard MIL connector that is compliant with the MIL standard (MIL-C-83503) and UL-certified.

• UL
• MIL
• For Signal
• Connection between Boards
• Solenoid Valve
• PLC
• Pressure Welding
• Gold Plated

Han Q Series Connector (Crimp Connection)

HARTING

This series is even smaller than the Han A series. Saves space, as the connector outer diameter is the same size even if the number of wires increases (Models are separated using "-" rather than spaces).

Han D / DD Series Connector (Crimp Connection)

HARTING

Available in a wide range of variations in the number of pins. Ideal power source connector for use in harsh environments. Crimp connection for reliable connection (Models are separated using "-" rather than spaces).

CSH Tool Not Required Spring Type 16A / 500V Insert

ILME

CSH, no-tool-required spring type, 16A / 500V insert

[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert

EMI Countermeasure Solder/Machine Contact D-Sub Connector

MISUMI

Has a machine contact for plug-in and removal durability, and bead processing ensures a firm contact with the partner

• For Signal
• Connection between Boards
• PLC
• EMI Countermeasure
• RS422
• Solder
• Gold Plated
• Screw Lock

CAD ：

2D

PCS Series

HONDA TSUSHIN KOGYO

Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors

[Features]
· Board to cable types available in 20 to 96 cores.
• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
· Soldered types also available.
▪ For EMI measures other than FCC.
• Built with a durable structure for use as an interface.
· Quick lock using a metal lock spring.
· Those for panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
· A wide range of core numbers, from 34 to 150, are also available for board to board.
• Specifically designed for smooth insertion and extraction, even when using multiple cores.
• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).

D-sub Connector Plug Case (Plastic Type), CTF Series

HIROSE ELECTRIC

These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.

[Features]
· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
• Made of strong ABS resin, so they are lightweight and sturdy.
• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
• 25-contact models are plug cases for modems as defined in JIS-C-6361.
• Easily incorporated using solder (HD type) or crimping (CD type).

D-Sub Connector (Ribbon Cable Insulation Displacement Connection Type) FD Series

HIROSE ELECTRIC

A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.

[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.

[Ilme Enclosure]C Type IP66 Rotary Lever Series for CZ Insert

ILME

New generation lever IL-BRID Series.
[Features]
・ The newly-developed IL-BRID lever is made of stainless steel and has smooth resin.
The manufacturer has adopted the latest design in which these 2 contradictory features are perfectly coordinated.
・ When you operate the lever, the resin part first engages the peg to reduce friction and then slides and is fixed.
・ After that, the stainless steel part is fixed to the peg to ensure a high load capacity.
・ Low friction makes it suitable for frequent insertion and removal applications.

Misumi, Waterproof, E-Model Connector (Screw Wire Connection)

MISUMI

[Features]MISUMI's original, low-cost, environment-resistant, and waterproof E-type connector. Due to cable connection by screws, it can be easily connected with just a slotted screwdriver without the need for dedicated tools. The screw connection is equipped with a contact. Please confirm the type and male or female before ordering.

• UL
• IP65
• For Power Supply
• For Signal
• Connection between Boards
• Connection in Boards
• Screw Type
• Insertion
• 2DCAD
• Silver-Plated

CAD ：

2D

MR Male Connector

MISUMI

High-density MR Male Connector

• For Signal
• Connection between Boards
• PLC
• Solder
• Silver-Plated

CAD ：

2D

FCN connector Solder type female connector

MISUMI

Mitsubishi Electric / Omron / Fuji Electric PLC Connector

• Solder
• Gold Plated
• Screw Lock

PCR Series Case

HONDA TSUSHIN KOGYO

This is a PCR series case.

[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.

Discrete Wire Connector for Connection, DF1B Series (2.5 mm Pitch)【1-100 Pieces Per Package】

HIROSE ELECTRIC

[Features]
· A new type of connector in which IDC terminals are inserted into the case.
· By using both crimp terminals and IDC terminals, wires with different current capacities can be used in the same case.
· Terminals can be replaced after connection, providing excellent maintainability.
· IDC part is protected by the case to provide a high level of reliability.
· No need for an expensive IDC machine as IDC work can be performed by simply replacing the applicator on a conventional crimping machine.
· High-profile headers are also available for supporting board potting (filling with resin) performed as a waterproofing measure.
· Single-row and double-row contact configurations with standard tin or gold plating for each of the “board-to-cable” and “in-line” series products.
[Applications]
· Convenient for various types of wiring.
· For all types of OA equipment, including copy machines and printers.

• Volume Discount