(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

  • Viewed
    Products
  • My
    Components
  • Cart
  • Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Dust Collector For Use In Cleanrooms

Dust Collector For Use In Cleanrooms

You can add up to 6 items to the comparison list.

Specification / DimensionsClear all selection

Days to Ship :
Standard Unit Price :

Loading...

Details

Catalog

Product Description

[Features]
・ A local dust collector / dust suction machine that is convenient for work involving dust generation and for preventing contamination of cleanrooms from sources
・ The 3-layer structure of the pre-filter, medium-performance filter, and HEPA filter ensures dust suction and clean exhaust
・ Each filter can be easily replaced without tools
・ A wide range of exhaust is possible by using a suction hood (sold separately)
・ Convenient for dust generation work in a cleanroom

Loading...

Product Specifications

Dust Collector That Is Convenient For Work Involving Dust Generation And Preventing Contamination Of Cleanrooms

Accessories include 1 each of a prefilter, medium-quality filter and HEPA filter.

Dust Collector Main Body

Dust Collector Main Body

Suction hood + hard duct, usage examples

Suction hood + hard duct, usage examples

Product Range Of Dust Collector For Cleanrooms

Part No.Model NumberExternal Dimensions (mm)
1-1588-01KDC-CO3A (Dust Collector Main Body)350 × 411 × 435
1-5928-12Hard Duct-
1-5928-13Duct BandFor ø75 mm
1-5928-14Suction Hood420 × 320

Name Of Each Part

External view

External view

Structural drawing

Structural drawing

Usage Method Of This Product

Moving/Installation

1. When moving this machine, lift it up over locations with an uneven surfaces.

  • *There is risk of the casters being damaged by the uneven surface.

2. This product is a machine for indoor use only. Do not, under any circumstance, use this machine outdoors or in location where it could come into contact with water or oil. Also, be sure to store it indoors, even after use.

3. Install on a hard, level surface on the floor indoors.

  • *Do not install on a weak floor, on a pedestal or at a location where there is an incline or uneven surface.

4. Do not install at a location with a temperature of 35°C or more and/or a humidity of 85% or more.

5. Leave 10 cm or more between the back side of the main unit (exhaust port) and the wall surface for exhaust.

6. When using a duct and suction hood (sold separately), attach the connecting part tightly with the dedicated band.

Power Supply Connection

1. Confirm that the power switch on the product is turned off before connecting it to the power supply.

2. Use this product with a power supply that has the following earth-leakage circuit breaker installed. If electrical work is required, leave the work to an electrical professional specified by your power company.

  • Rated 15 A, single-phase 100 V
  • Rated 10 A, single-phase 200 V

3. Be sure to ground the product. In addition, do not connect the earth wire to the earth wire of a gas pipe, lightning rod or telephone.

Confirmation Before Operation

Be sure to check the following details before operation, and cease using the product if there is a problem.

  • All filters must be correctly installed.
  • There must be no visual abnormalities (damage, deformation, distortion, sagging, etc.) on the product.
  • The snap locks of the suction cover must all be reliably secured.
  • The seal of the suction cover must not be peeled off, deformed or damaged.

*Be sure to confirm that there are no visual abnormalities (damage, deformation, distortion, sag etc.) on the product before use. The performance of the product may suffer depending on the site where the abnormality occurs, and it could cause an accident or breakdown.

Usage Method

Preparation For Operation

1. Check if the filter is tightly secured.
2. Check if the suction port is tightly secured if using a duct or suction hood.

Operation

1. Plug the power plug into a power outlet.
2. The fan turns on when the power switch is turned on.
3. The fan turns off when the power switch is turned off.
4. Be sure to turn the power switch OFF after the task is finished.


  • Not a MISUMI customer yet?
  • Register and enjoy 20% Off
  • on your 1st order! *
  • Download CAD data and product data for more than 12 Mio. products.
  • Configure your drawing parts in the MISUMI Online Shop and save time and resources.
  • Reduce your process costs with the MISUMI Online Shop.
X
whatsapp-qr whatsapp-icon
Close

Comparison list

Please select a default language