Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 15/12/2024 to 3:30 (IST) 16/12/2024. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

HR10G-10R-10S(71)

Applicable pin/contact Number Of Pins Connector Type Wiring Method Connection direction Protection function (environmentally resistant) Shell Size Plating of part touching terminal Product Category Specifications Dimensions (vertical × horizontal × depth) Days to Ship

Specification/Dimensions

Applicable pin/contact
- Male
- Female
Clear
Number Of Pins
4

5

6

10

12

20
Clear
Connector Type
- Cable Connection
- For PCB
- Panel Mount
Clear
Wiring Method
- Solder
- Crimp
Clear
Connection direction
- Straight
Clear
Protection function (environmentally resistant)
- Available
  - Waterproof Type
- NA
Clear
Shell Size
7

10

13
Clear
Plating of part touching terminal
- Gold
- Silver
Clear
Product Category
- Jack
- Plug
- Receptacle
- Terminal
Clear
Specifications
- Loose terminal
- Low Cost
- Screw coupling
- Series terminal
- Shield Type
- Standard
Clear
Dimensions (vertical × horizontal × depth)(mm)
- 1.15 x 1.2 x 10
- φ 11 × 12
- φ 11 × 12.2
- φ 11 × 14
- φ 11 × 15.5
- φ 11 × 15.6
- φ 11 × 28.5
- φ 11 × 35.3
- φ 11.5 × 35
- φ 12 × 35
- φ 14 × 12
- φ 14 × 12.2
- φ 14 × 14
- φ 14 × 15.5
- φ 14 × 15.6
- φ 14 × 16
- φ 14 × 32.5
- φ 14 × 43.5
- φ 14 × 46.5
- φ 14.7 × 41.3
- φ 14.7 × 43
- φ 15 x 45.8
- φ 17 x 43
- φ 18 × 15
- φ 18 × 17.8
- φ 18 × 19.2
- φ 18 × 20.2
- φ 18 × 58.5
- φ 19 × 59
- φ 20 × 56.5
Clear

Days to Ship

All

5 Day(s) or Less

10 Day(s) or Less

13 Day(s) or Less

15 Day(s) or Less
Clear

Specify Alterations

HR10 Series Miniature Circular Connector【1-100 Pieces Per Package】 (HR10G-10R-10S(71))

Name: HR10 Series Miniature Circular Connector
Brand: HIROSE ELECTRIC
Price: 701.6 INR
Availability: PreOrder

HR10 Series Miniature Circular Connector (HR10G-10R-10S(71))

Click this image to zoom it.

Move the mouse over or click the image to zoom

Brand :

HIROSE ELECTRIC

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

Product Description

Small-diameter circular connectors, with the smallest size being close to the thickness of a cigarette. For use with camera interfaces.
[Features]
· Single-action, push-pull lock mechanism enables quick insertion and removal.
· Simply push when inserting to securely lock.
· Five key ensures insertion only to the intended location even when inserting by feel.
· Contacts are arranged in a safe configuration that prevents the contact pins from being damaged when aligning the five key by feel.
· Push-pull lock means little space is necessary for insertion and removal, making it possible to mount multiple connectors in close proximity to each other.
· No small screwdrivers are required for connector disassembly or assembly, meaning wiring and mounting can be performed easily using a JIS wrench.
· With a simple and neat external appearance and a satin finish on the top surface, the connectors will not stand out.
· Compact, high density, high reliability and simple design.
· Extremely simple insertion and removal.
[Applications]
· Convenient for a wide range of equipment due to its small size, light weight, and excellent operability.

High-Performance Circular Connector for Camera Interfaces

Can be used with a wide range of equipment thanks to its small size, light weight, and excellent operability.

Specifications of HR10 Series Miniature Circular Connectors

Product Standards

Rating	Shell Size	Number of Contacts	Rated Current
	7	4 5 6	2 A
	10	10 12	2 A
	13	20	2 A

Rating	Shell Size	Number of Contacts	Rated voltage
	7	4 5 6	150 V AC, 200 V DC 100 V AC, 140 V DC 100 V AC, 140 V DC
	10	10 12	100 V AC, 140 V DC
	13	20	100 V AC, 140 V DC

Rating	Operating Temperature Range	-25 to 85°C
Rating	Storage temperature range	-10 to 60°C

Item	Standard	Conditions
1. Contact resistance	10 mΩ or less	Measure at 1 A DC
2. Insulation resistance:	1,000 MΩ or more	Measure at 100 V DC
3. Withstand voltage	There shall be no flashover or dielectric breakdown	300 V AC for 1 min., 4-pin: 500 V AC for 1 min.
4. Vibration resistance	There shall be no electrical discontinuity for 10 μs or greater	Test at 10 to 55 Hz/cycle, Single amplitude: 0.75 mm Three directions, 2 hours each.
5. Shock	There shall be no electrical discontinuity for 10 μs or greater	Test at acceleration 490 m/s², duration: 11 ms, 3 directions, 3 times each.
6. Mating cycle	Contact resistance 15 mΩ or less	1,000 times
7. Temperature cycle	Insulation resistance 1,000 MΩ or more	Leave at -55°C: 30 mins. > Room temperature: 10 to 15 mins. > 85°C: 30 mins.>Room temperature: 10 to 15 mins. Total of 5 cycles.
8. Humidity resistance	Insulation resistance: 5 MΩ or more (at high humidity), 50 MΩ or more (when dry)	Temperature: 40°C, relative humidity: 90 to 95%, left for 96 hours.

Materials/Processing

Item	Materials	Finish	Notes
Exterior	Zinc alloy, brass	Matte-finished nickel plating	―
Insulator	Polyamide resin, PBT resin	―	Blue, black
Contacts	Copper alloy	HR10: gold plating HR10A: silver plating	―

Product Name	Materials	Finish
Plug shell	Brass	Gold plating
Jack shell	Brass	Gold plating
Insulator	Tetrafluoride resin
Male contact	Phosphor bronze	Gold plating
Female contacts	Beryllium copper	Gold plating

Coaxial Contact Materials/Processing

Item	Standard Value
Impedance	50 Ω
Insulation resistance	1,000 MΩ or more at 250 V DC
Contact resistance	Center 6.5 mΩ or less, Exterior 4 mΩ or less at 1 A DC
Withstand Voltage	At 250 V AC (r.m.s) for 1 min.
Voltage standing wave ratio	0 to 1,000 MHz, 1.3 or less
Pull force (extraction force)	4.9 N (500 gf) or more

Coaxial contact performance

Connector Combination Diagram

(Notes)

1. When using a plug with male terminal, be sure to use a receptacle or jack fitted with female terminal.
2. The standard finish of the terminal is gold plating for the HR10, and silver plating for the HR10A and HR10G. Be sure to use male and female connectors of the same plating.

Product Usage

Connector Handling

Wiring procedure (plug side)

*This applies also to the jack side assembly procedure.
*No special procedure is given here for the receptacle side because no special procedure is necessary.

	HR10 Type	HR10A Type
1	Use cables with a nominal sectional area of 0.129 mm² (26 AWG) or less at the finished outer diameters applicable for each size.
2	After processing the cable ends according to the dimensions in the above drawings, fit the parts to the cable as shown in the drawings.
2	Fit the parts to the cable in the following order: tightener, clamp washer and plug body.	Fit the parts to the cable in the following order: tightener, cord bushing and plug body.
3	(Solder type) Insert the P shell unit into the assembly tool stand and solder it. (Crimp type) After crimping the appropriate crimp terminal to the cable core, insert the crimp terminal into the terminal hole in the P shell unit.
4	Assemble the connector in the following order.
4	(1) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part C so that no load is applied to the soldered wires. (2) Apply the clamp washer to the bifurcated part of the plug body, and then tighten the tightener until surface B touches the plug body surface A. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section.	(1) Fix by crimping the clamp accompanying the cable with the cable crimping tool (HR10A-TC-02). (2) Screw the plug body into the thread in the P shell unit with the tightening force shown in Table 1 using a torque wrench with a fixed torque. Before tightening the plug body, slacken part D so that no load is applied to the soldered wires. (3) Tighten the set screw so that the tip of the screw presses one of the 2 bosses on the clamp. Fix the set screw with a tightening torque of 0.3 N·m (3 kgf/cm.) (4) Attach the cord bushing to the plug body. (Note) In order to prevent loosening, apply a screw-locking adhesive at the threaded section.
5	This completes the work.

Wiring procedure (plug side) work steps

Product Usage Precautions

1. Make sure the power is off before mating or un-mating the connector.
2. Use connectors with socket (female) contacts at the power side of the circuit.
3. Make sure that the coupling is in the completely locked position.
4. Cable clamping, cable rotation, and other forces may vary with the cable construction. Make sure that your cable is suitable for use with these connectors before usage and production.

: 30; 45; 60

Part Number
HR10G-10R-10S(71)

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Applicable pin/contact	Number Of Pins	Connector Type	Wiring Method	Connection direction	Protection function (environmentally resistant)	Shell Size	Plating of part touching terminal	Product Category	Specifications	Dimensions (vertical × horizontal × depth) (mm)	Operating Temperature Range (°C)	Mating partner 1	Mating partner 2	Mating partner 3	Mating partner 4	Mating partner 5	Mating partner 6	Mating partner 7	Mating partner 8	Mating partner 9	Mating partner 10	Mating partner 11	Mating partner 12	Mating partner 13	Mating partner 14	Mating partner 15	Mating partner 16	Mating partner 26	Mating partner 27
	₹ 701.60	1 Piece(s)		5 Day(s) or more	10	Female	10	Panel Mount	Solder	Straight	NA	10	Silver	Receptacle	Shield Type	φ 14 × 16	-25 to +85	HR10A-10P-10P(73)	HR10A-10P-10PC(73)	HR10A-10PB-10P(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Basic Information

Connector Shape	Round shape	Connector series initials	G/H/I	G/H/I	HR10
Rated Current(A)	2	Features	NA

Please check the type/dimensions/specifications of the part HR10G-10R-10S(71) in the HR10 Series Miniature Circular Connector series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Product variants

Part Number
HR10-10R-12P(73)
HR10-10R-12PA(73)
HR10-10R-12S(73)
HR10G-10R-10SB(71)
HR10G-10R-12P(73)
HR10G-10R-12S(71)

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Applicable pin/contact	Number Of Pins	Connector Type	Wiring Method	Connection direction	Protection function (environmentally resistant)	Shell Size	Plating of part touching terminal	Product Category	Specifications	Dimensions (vertical × horizontal × depth) (mm)	Operating Temperature Range (°C)	Mating partner 1	Mating partner 2	Mating partner 3	Mating partner 4	Mating partner 5	Mating partner 6	Mating partner 7	Mating partner 8	Mating partner 9	Mating partner 10	Mating partner 11	Mating partner 12	Mating partner 13	Mating partner 14	Mating partner 15	Mating partner 16	Mating partner 26	Mating partner 27
₹ 1,089.27	1 Piece(s)	5 Day(s) or more	-	Male	12	Panel Mount	Solder	Straight	NA	10	Gold	Receptacle	Standard	φ 14 × 16	-25 to +85	HR10-10P-12S(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
₹ 1,533.60	1 Piece(s)	5 Day(s) or more	10	Male	12	For PCB	Solder	Straight	NA	10	Gold	Receptacle	Standard	φ 14 × 15.5	-25 to +85	HR10-10P-12S(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
₹ 1,861.60	1 Piece(s)	5 Day(s) or more	-	Female	12	Panel Mount	Solder	Straight	NA	10	Gold	Receptacle	Standard	φ 14 × 16	-25 to +85	HR10-10P-12P(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
₹ 1,705.41	1 Piece(s)	5 Day(s) or more	-	Female	10	For PCB	Solder	Straight	NA	10	Silver	Receptacle	Shield Type	φ 14 × 15.6	-25 to +85	HR10A-10P-10P(73)	HR10A-10P-10PC(73)	HR10A-10PB-10P(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
₹ 1,093.60	1 Piece(s)	5 Day(s) or more	-	Male	12	Panel Mount	Solder	Straight	NA	10	Silver	Receptacle	Shield Type	φ 14 × 16	-25 to +85	HR10A-10P-12S(73)	HR10A-10P-12SC(73)	HR10A-10PD-12S(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
₹ 582.40	1 Piece(s)	5 Day(s) or more	10	Female	12	Panel Mount	Solder	Straight	NA	10	Silver	Receptacle	Shield Type	φ 14 × 16	-25 to +85	HR10A-10P-12P(73)	HR10A-10P-12PC(73)	HR10A-10PD-12P(73)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Search by Category / Brand

Search by Category

How can we improve?