(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.
Loading...
Outer Diameter (D)(φ) | 2.5 | Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] |
---|---|---|---|
Flute Length (ℓ)(mm) | 3.8 | Number of Flutes(sheet) | 2 |
Model | Long Neck Square | Coating | For General Steel (AlCrN etc.) |
Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
Length Under Neck (ℓ1)(mm) | 12 | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting |
Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Show More | |||
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Figure | 1 | ● Inventory Product □ Manufacturer Product | ● |
Under Neck Diameter d1(mm) | 2.4 | Actual Effective Length Depends on Work Inclination Angle 30'(mm) | 12.57 |
Actual Effective Length Depends on Work Inclination Angle 1°(mm) | 13.19 | Actual Effective Length Depends on Work Inclination Angle 2°(mm) | 14.65 |
Actual Effective Length Depends on Work Inclination Angle 3°(mm) | Without Interference | Length Under Neck (θ) | 10° |
Show Less |
Loading...
Outer Diameter (D)(φ) | 2.5 | Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] |
---|---|---|---|
Flute Length (ℓ)(mm) | 3.8 | Number of Flutes(sheet) | 2 |
Model | Long Neck Square | Coating | For General Steel (AlCrN etc.) |
Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
Length Under Neck (ℓ1)(mm) | 12 | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting |
Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Show More | |||
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Figure | 1 | ● Inventory Product □ Manufacturer Product | ● |
Under Neck Diameter d1(mm) | 2.4 | Actual Effective Length Depends on Work Inclination Angle 30'(mm) | 12.57 |
Actual Effective Length Depends on Work Inclination Angle 1°(mm) | 13.19 | Actual Effective Length Depends on Work Inclination Angle 2°(mm) | 14.65 |
Actual Effective Length Depends on Work Inclination Angle 3°(mm) | Without Interference | Length Under Neck (θ) | 10° |
Show Less |
Loading...
Outer Diameter (D)(φ) | 2.5 | Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] |
---|---|---|---|
Flute Length (ℓ)(mm) | 3.8 | Number of Flutes(sheet) | 2 |
Model | Long Neck Square | Coating | For General Steel (AlCrN etc.) |
Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
Length Under Neck (ℓ1)(mm) | 12 | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting |
Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Show More | |||
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Figure | 1 | ● Inventory Product □ Manufacturer Product | ● |
Under Neck Diameter d1(mm) | 2.4 | Actual Effective Length Depends on Work Inclination Angle 30'(mm) | 12.57 |
Actual Effective Length Depends on Work Inclination Angle 1°(mm) | 13.19 | Actual Effective Length Depends on Work Inclination Angle 2°(mm) | 14.65 |
Actual Effective Length Depends on Work Inclination Angle 3°(mm) | Without Interference | Length Under Neck (θ) | 10° |
Show Less |
The long-awaited long-neck type joins the popular XAL Series
Loading...
Outer Diameter (D)(φ) | 2.5 | Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] |
---|---|---|---|
Flute Length (ℓ)(mm) | 3.8 | Number of Flutes(sheet) | 2 |
Model | Long Neck Square | Coating | For General Steel (AlCrN etc.) |
Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
Length Under Neck (ℓ1)(mm) | 12 | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting |
Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Show More | |||
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Figure | 1 | ● Inventory Product □ Manufacturer Product | ● |
Under Neck Diameter d1(mm) | 2.4 | Actual Effective Length Depends on Work Inclination Angle 30'(mm) | 12.57 |
Actual Effective Length Depends on Work Inclination Angle 1°(mm) | 13.19 | Actual Effective Length Depends on Work Inclination Angle 2°(mm) | 14.65 |
Actual Effective Length Depends on Work Inclination Angle 3°(mm) | Without Interference | Length Under Neck (θ) | 10° |
Show Less |
Loading...
Loading...
Loading...
Outer Diameter (D)(φ) | 2.5 | Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum Alloy[◎] / Copper Alloy[◎] / Resin[○] |
---|---|---|---|
Flute Length (ℓ)(mm) | 3.8 | Number of Flutes(sheet) | 2 |
Model | Long Neck Square | Coating | For General Steel (AlCrN etc.) |
Shank Diameter (d)(mm) | 4 | Overall Length (L)(mm) | 50 |
Length Under Neck (ℓ1)(mm) | 12 | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting |
Geometry | With Lead | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Show More | |||
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
Figure | 1 | ● Inventory Product □ Manufacturer Product | ● |
Under Neck Diameter d1(mm) | 2.4 | Actual Effective Length Depends on Work Inclination Angle 30'(mm) | 12.57 |
Actual Effective Length Depends on Work Inclination Angle 1°(mm) | 13.19 | Actual Effective Length Depends on Work Inclination Angle 2°(mm) | 14.65 |
Actual Effective Length Depends on Work Inclination Angle 3°(mm) | Without Interference | Length Under Neck (θ) | 10° |
Show Less |
Part Number |
---|
XAL-EM2LB2.5-12 |
Part Number | Price | Minimum Order Qty. | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
₹ 848.58 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 12 | With Lead | 1 | 2.4 | 12.57 | 13.19 | 14.65 | Without Interference | 10° |
Part Number |
---|
Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.1 | 0.3 | - | 4 | No Standards | ● | 0.2 | 0.085 | 50 | 10° | 0.31 | 0.33 | 0.37 | 0.41 | 1 |
0.5 | No Standards | ● | 0.52 | 0.55 | 0.61 | 0.69 | ||||||||
1 | No Standards | ● | 1.05 | 1.1 | 1.22 | 1.37 | ||||||||
0.2 | 0.5 | - | 4 | No Standards | ● | 0.3 | 0.18 | 50 | 10° | 0.52 | 0.55 | 0.61 | 0.69 | 1 |
1 | ● | ● | 1.05 | 1.1 | 1.22 | 1.37 | ||||||||
1.5 | ● | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | No Standards | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
3.5 | No Standards | ● | 3.66 | 3.85 | 4.27 | 4.81 | ||||||||
4 | No Standards | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
0.3 | 1 | - | 4 | ● | ● | 0.45 | 0.28 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
1.5 | No Standards | ● | 1.57 | 1.65 | 1.83 | 2.06 | ||||||||
2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
2.5 | No Standards | ● | 2.62 | 2.75 | 3.05 | 3.43 | ||||||||
3 | ● | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
6 | No Standards | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
0.4 | 1 | - | 4 | No Standards | ● | 0.6 | 0.37 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
2 | 6 | 6 | No Standards | ● | 15° | 2.06 | 2.13 | 2.28 | 2.45 | |||||
3 | - | 4 | ● | ● | 10° | 3.14 | 3.3 | 3.66 | 4.12 | |||||
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
5 | ● | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 |
Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
0.5 | 1 | - | 4 | No Standards | ● | 0.7 | 0.46 | 50 | 10° | 1.05 | 1.1 | 1.22 | 1.37 | 1 |
2 | ● | ● | 2.09 | 2.2 | 2.44 | 2.75 | ||||||||
3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | ● | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
5 | - | 4 | No Standards | ● | 10° | 5.24 | 5.49 | 6.1 | 6.87 | |||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
0.6 | 2 | - | 4 | ● | ● | 0.9 | 0.56 | 50 | 10° | 2.09 | 2.2 | 2.44 | 2.75 | 1 |
3 | No Standards | ● | 3.14 | 3.3 | 3.66 | 4.12 | ||||||||
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
4 | 6 | 6 | No Standards | ● | 15° | 4.13 | 4.26 | 4.56 | 4.91 | |||||
6 | - | 4 | ● | ● | 10° | 6.28 | 6.59 | 7.32 | 8.24 | |||||
7 | No Standards | ● | 7.33 | 7.69 | 8.54 | 9.61 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
15 | ● | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
0.7 | 2 | - | 4 | ● | ● | 1.05 | 0.66 | 50 | 10° | 2.09 | 2.2 | 2.44 | 2.75 | 1 |
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
0.8 | 4 | - | 4 | ● | ● | 1.2 | 0.76 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | 27.46 | |||||||
24 | No Standards | ● | 25.13 | 26.38 | 29.29 | Without Interference | ||||||||
0.9 | 4 | - | 4 | No Standards | ● | 1.35 | 0.85 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
15 | No Standards | ● | 15.71 | 16.48 | 18.31 | 20.6 | ||||||||
1 | 3 | - | 4 | No Standards | ● | 1.5 | 0.95 | 50 | 10° | 3.14 | 3.3 | 3.66 | 4.12 | 1 |
4 | ● | ● | 4.19 | 4.4 | 4.88 | 5.49 | ||||||||
5 | No Standards | ● | 5.24 | 5.49 | 6.1 | 6.87 | ||||||||
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
6 | 6 | 6 | ● | ● | 15° | 6.19 | 6.39 | 6.84 | 7.36 | |||||
7 | - | 4 | No Standards | ● | 10° | 7.33 | 7.69 | 8.54 | 9.61 | |||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
9 | No Standards | ● | 9.42 | 9.89 | 10.98 | 12.36 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
22 | No Standards | ● | 23.04 | 24.18 | 26.85 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference |
Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
1.2 | 6 | - | 4 | ● | ● | 1.8 | 1.15 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
1.4 | 6 | - | 4 | No Standards | ● | 2.1 | 1.35 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
1.5 | 4 | - | 4 | No Standards | ● | 2.3 | 1.45 | 50 | 10° | 4.19 | 4.4 | 4.88 | 5.49 | 1 |
6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||||
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
1.6 | 6 | - | 4 | No Standards | ● | 2.4 | 1.55 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
26 | No Standards | ● | 27.22 | 28.57 | 31.73 | Without Interference | ||||||||
1.8 | 6 | - | 4 | No Standards | ● | 2.7 | 1.75 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | No Standards | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
2 | 6 | - | 4 | ● | ● | 3 | 1.95 | 50 | 10° | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||||
10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
10 | 6 | 6 | ● | ● | 15° | 10.31 | 10.65 | 11.4 | 12.27 | |||||
12 | - | 4 | ● | ● | 10° | 12.57 | 13.19 | 14.65 | 16.48 | |||||
14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
60 | No Standards | ● | 62.83 | Without Interference | Without Interference | Without Interference |
Flute Diameter D | Length Under Neck ℓ1 | Shank Diameter d | Shank Diameter d | Standard | Sharp Edge | Blade Length ℓ | Under Neck Diameter d1 | Overall Length L | Under Neck Angle θ | Actual Effective Length Depends on Work Inclination Angle | Figure | |||
30' | 1° | 2° | 3° | |||||||||||
2.5 | 8 | - | 4 | ● | ● | 3.8 | 2.4 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||||
14 | No Standards | ● | 14.66 | 15.39 | 17.09 | Without Interference | ||||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
18 | No Standards | ● | 70 | 18.85 | 19.78 | Without Interference | Without Interference | |||||||
20 | ● | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
40 | No Standards | ● | 100 | 41.88 | Without Interference | Without Interference | Without Interference | |||||||
50 | No Standards | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
3 | 8 | - | 6 | ● | ● | 4.5 | 2.9 | 50 | 10° | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||||
12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||||
14 | No Standards | ● | 70 | 14.66 | 15.39 | 17.09 | 19.22 | |||||||
16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||||
18 | No Standards | ● | 18.85 | 19.78 | 21.97 | 24.71 | ||||||||
20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||||
25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||||
40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
4 | 12 | - | 6 | ● | ● | 6 | 3.8 | 50 | 10° | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||||
20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||||
25 | No Standards | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||||
35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||||
40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||||
45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||||
50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||||
5 | 16 | - | 6 | ● | ● | 7.5 | 4.8 | 70 | 10° | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
20 | No Standards | ● | 20.94 | 21.98 | Without Interference | Without Interference | ||||||||
25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||||
30 | No Standards | ● | 31.41 | Without Interference | Without Interference | Without Interference | ||||||||
35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||||
40 | No Standards | ● | 41.88 | Without Interference | Without Interference | Without Interference | ||||||||
50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||||
6 | 20 | - | 6 | ● | ● | 9 | 5.8 | 70 | - | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||||
50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||||
60 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference |
Work Material | General Steel / Heat-Treated Steel / Stainless Steel / Cast Iron / Aluminum Alloy / Copper Alloy / Resin | Number of Flutes(sheet) | 2 | Model | Long Neck Square |
---|---|---|---|---|---|
Coating | For General Steel (AlCrN etc.) | Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Torsion Angle (θ) | Standard Helix (30 to 40°) |
Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 | ● Inventory Product □ Manufacturer Product | ● |
Please check the type/dimensions/specifications of the part XAL-EM2LB2.5-12 in the XAL Coated Carbide Long Neck Square End Mill, 2-Flute / Long Neck Model series.
Part Number |
---|
XAL-EM2LB0.3-2 |
XAL-EM2LB0.3-3 |
XAL-EM2LB0.3-4 |
XAL-EM2LB2.5-16 |
XAL-EM2LB2.5-20 |
XAL-EM2LB2.5-25 |
Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | Length Under Neck (θ) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
₹ 1,568.00 | 1 Piece(s) | 6 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 2 | With Lead | 1 | 0.28 | 2.09 | 2.2 | 2.44 | 2.75 | 10° | ||
₹ 1,632.00 | 1 Piece(s) | 6 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 3 | With Lead | 1 | 0.28 | 3.14 | 3.3 | 3.66 | 4.12 | 10° | ||
₹ 1,872.00 | 1 Piece(s) | 6 Day(s) or more | 0.3 | 0.45 | 4 | 50 | 4 | With Lead | 1 | 0.28 | 4.19 | 4.4 | 4.88 | 5.49 | 10° | ||
₹ 848.58 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 3.8 | 4 | 50 | 16 | With Lead | 1 | 2.4 | 16.75 | 17.58 | 19.53 | Without Interference | 10° | ||
₹ 850.09 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 3.8 | 4 | 70 | 20 | With Lead | 1 | 2.4 | 20.94 | 21.98 | Without Interference | Without Interference | 10° | ||
₹ 980.00 | 1 Piece(s) | 6 Day(s) or more | 2.5 | 3.8 | 4 | 70 | 25 | With Lead | 1 | 2.4 | 26.18 | 27.47 | Without Interference | Without Interference | 10° |
Part Number |
---|
How can we improve?
How can we improve?
Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy
Thank you for your cooperation.
Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.
Privacy Policy