Can linear guides or sliders be purchased separately?

Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.

Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?

The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.

What problems should be paid attention to when the linear guide is installed vertically?

Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.

Can the rail or slider be repaired if it is damaged?

Repair service is not provided, re-purchase is recommended.

Can the corresponding MISUMI linear guide products be selected according to the third-party guide rail model?

MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.

Can linear guide length be arbitrarily specified?

It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(5 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-HLGWHA20-[160-1960/1]

Rail Length L Assembly Height H Nominal Part Number No. of Blocks Lubrication Type L Dimension Type Applicable Linear Guide Block Material (Surface Treatment) Rail Material (Surface Treatment) Rail Surface Treatment Set / Single Item CAD Days to Ship

Specification/Dimensions

Rail Length L(mm)
[160-1960/1mm Unit(s)]
Clear
Assembly Height H(mm)
30

36

42

48

60
Clear
Nominal Part Number
20

25

30

35

45
Clear
No. of Blocks
- 1
Clear
Lubrication Type
- Lithium Grease Filled
Clear
L Dimension Type
- Specified Type
Clear
Applicable Linear Guide
C-HLGWHA20

C-HLGWHA25

C-HLGWHA30

C-HLGWHA35

C-HLGWHA45
Clear
Block Material (Surface Treatment)
- Carbon Steel
Clear
Rail Material (Surface Treatment)
- Carbon Steel
Clear
Rail Surface Treatment
- none
Clear
Set / Single Item
- Set
- Block Only
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day

3 Day(s) or Less
Clear

Specify Alterations

Linear Guides Wide Long Blocks

Volume Discount

Check FAQ of this product (6 items)

Brand :

MiSUMi Economy

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Linear Guides Wide Long Blocks
These linear guides or linear slides are an economy item, The price is cheaper than the MISUMI standard product. They offer a wide variety of sizes to choose from.
[Feature]
● Rail Length Minimum/Maximum (mm.): 110 and 1960
● Assembly Height (mm.): 30, 36, and 42
● Option: Set (Rail + Block) / Block only
● Material: Carbon Steel 58HRC
[Application]
It is used in a variety of machines such as CNC machines, 3D printers, measuring instruments, and so on.

Economy Carbon Steel Wide Long Block Linear Guide

High LoadDurableEconomical

- Rail lengths available in a wide range

- Multiple assembly heights available

- High rated load and precision

- Carbon Steel material with 58HRC hardness

- Economical choice for various machines

Economy Carbon Steel Wide Long Block Linear Guide

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

Linear Guides, also known as slide rail or linear slide, which is used for linear reciprocating motion, has higher rated load and linear motion precision than linear bearings under the same moving component volume. Also, it bears a certain torque load, achieving high-precision linear motion under high load.
Used to support and guide moving parts, Linear Guides make reciprocating linear motion in a specified direction. It is mainly used in mechanical structures with high precision requirements. Rolling steel balls are used instead of intermediate medium between the moving element and the fixed element of the Linear Guides rail.

Dimensional Drawing

MISUMI Medium Linear Guide Slider dimension drawing

Operating Temperature: -20 to 80°C

Since this product of Linear Guides has no surface treatment, please be sure to take anti-rust measures.

The dimensional tolerance of Length L is ±2 mm.

The kit includes 1 block. For additional blocks, please purchase a single block model.

Type	Component Kit/Single Block	Material	Hardness
C-HLGWHA	Component Kit	Carbon Steel	58HRC～
C-HLGWHAB	Single Block	Carbon Steel	58HRC～

Specification Table

■ Component Kit

Part Number		Length L (increments 1mm)	Guide Rail Dimension (mm)												Block Dimension (mm)
Type	Nominal Model	Length L (increments 1mm)	W	B	B₁	C	L₁	L₂	K₁	K₂	G	M	T	H₂	H	H₁	N	H_R	W_R	Countersunk d×D×h	P	E
C-HLGWHA	20	110～3960	63	53	5	40	65.2	91.9	17.4	6	12.5	M6	7.5	6	30	4.6	21.5	17.5	20	6×9.5×8.5	60	Please refer to the calculation table below
	25	160～3960	70	57	6.5	45	78.6	106.6	21.4		12.5	M8	8.4	6	36	5.5	23.5	22	23	7×11×9	60
	30	160～3960	90	72	9	52	93	124.7	25.8		12.5	M10	8.7	6.4	42	6	31	26	28	9×14×12	80
	35	200～3960	100	82	9	62	105.8	138.4	25.75	7	12.5	M10	10.1	9	48	7.5	33	29	34	9×14×12	80
	45	200～3960	120	100	10	80	128.8	166.7	30.1	10	17	M12	14.5	8.5	60	9.5	37.5	38	45	14×20×17	105

The kit includes 1 block. For additional blocks, please purchase a single block model.

The reference surface is set on the side of the block and slide rail with the linear groove. When used, make sure to align the two reference surfaces with each other.

The running parallelism is the value after the slide rail is fixed. (It is not the value before the screws of the slide rail are tightened.)

Since this product has no surface treatment, please be sure to take anti-rust measures.

Dimension E of length specified type needs to be calculated. Please refer to "detailed dimension of Dimension L specified type" for calculation method
■ Single Block

Part Number		Block Dimension (mm)
Type	Nominal Model	W	B	B₁	C	L₁	L₂	K₁	K₂	G	M	T	H₂
Type	Nominal Model	W	B	B₁	C	L₁	L₂	K₁	K₂	G	M	T	H₂
C-HLGWHAB	20	63	53	5	40	65.2	91.9	17.4	6	12.5	M6	7.5	6
	25	70	57	6.5	45	78.6	106.6	21.4		12.5	M8	8.4	6
	30	90	72	9	52	93	124.7	25.8		12.5	M10	8.7	6.4
	35	100	82	9	62	105.8	138.4	25.75	7	12.5	M10	10.1	9
	45	120	100	10	80	128.8	166.7	30.1	10	17	M12	14.5	8.5

■ Allowable Load

Nominal Model	Basic Rated Load		Static Allowable Moment		Mass
Nominal Model	C (Dynamic) kN	Co (Static) kN	MA・MB kN-m	MC kN-m	Blocks kg	Guide Rails kg/m
20	32.7	47.96	0.35	0.35	0.52	2.11
25	42.2	69.07	0.57	0.56	0.8	3.21
30	58.6	93.99	0.92	0.88	1.44	4.47

■ L Detailed dimension of dimension specified type
Dimension L specified type cuts both ends of the rail equally. Refer to the table below for the number of mounting holes (M) of the slide rail at this time.
In addition, E dimension is calculated with the formula below
E dimension calculation formula

G dimension calculation formula for dimension specified type linear guide

Nominal Model	20	25	30	35	45	Number of Mounting Holes M
L	110～ 139	－	160～ 199	－	－	2
	140～ 199	160～ 201	200～ 279	200～ 279	255～359	3
	200～ 259	202～ 261	280～ 343	280～ 343	360～464	4
	260～ 319	262～ 321	344～ 423	344～ 423	465～569	5
	320～ 379	322～ 381	424～ 503	424～ 503	570～674	6
	380～ 439	382～ 441	504～ 583	504～ 583	675～779	7
	440～ 499	442～ 501	584～ 663	584～ 663	780～884	8
	500～ 559	502～ 561	664～ 743	664～ 743	885～989	9
	560～ 619	562～ 621	744～ 823	744～ 823	990～1094	10
	620～ 679	622～ 681	824～ 903	824～ 903	1095～1199	11
	680～ 739	682～ 741	904～ 983	904～ 983	1200～1304	12
	740～ 799	742～ 801	984～1063	984～1063	1305～1409	13
	800～ 859	802～ 861	1064～1143	1064～1143	1410～1514	14
	860～ 919	862～ 921	1144～1223	1144～1223	1515～1619	15
	920～ 979	922～ 981	1224～1303	1224～1303	1620～1724	16
	980～1039	982～1041	1304～1383	1304～1383	1725～1829	17
	1040～1099	1042～1101	1384～1463	1384～1463	1830～1934	18
	1100～1159	1102～1161	1464～1543	1464～1543	1935～2039	19
	1160～1219	1162～1221	1544～1623	1544～1623	2040～2144	20
	1220～1279	1222～1281	1624～1703	1624～1703	2145～2249	21
	1280～1339	1282～1341	1704～1783	1704～1783	2250～2354	22
	1340～1399	1342～1401	1784～1863	1784～1863	2355～2459	23
	1400～1459	1402～1461	1864～1943	1864～1943	2460～2564	24
	1460～1519	1462～1521	1944～2023	1944～2023	2565～2669	25
	1520～1579	1522～1581	2024～2103	2024～2103	2670～2774	26
	1580～1639	1582～1641	2104～2183	2104～2183	2775～2879	27
	1640～1699	1642～1701	2184～2263	2184～2263	2880～2984	28
	1700～1759	1702～1761	2264～2343	2264～2343	2985～3089	29
	1760～1819	1762～1821	2344～2423	2344～2423	3090～3194	30
	1820～1879	1822～1881	2424～2503	2424～2503	3195～3299	31
	1880～1939	1882～1941	2504～2583	2504～2583	3300～3404	32
	1940～1999	1942～2001	2584～2663	2584～2663	3405～3509	33
	2000～2059	2002～2061	2664～2743	2664～2743	3510～3614	34
P	60		80		105

Nominal Model	20	25	30	35	45	Number of Mounting Holes M
L	2060～2119	2062～2121	2744～2823	2744～2823	3615～3719	35
	2120～2179	2122～2181	2824～2903	2824～2903	3720～3824	36
	2180～2239	2182～2241	2904～2983	2904～2983	3825～3929	37
	2240～2299	2242～2301	2984～3063	2984～3063	3930～3960	38
	2300～2359	2302～2361	3064～3143	3064～3143	－	39
	2360～2419	2362～2421	3144～3223	3144～3223		40
	2420～2479	2422～2481	3224～3303	3224～3303		41
	2480～2539	2482～2541	3304～3383	3304～3383		42
	2540～2599	2542～2601	3384～3463	3384～3463		43
	2600～2659	2602～2661	3464～3543	3464～3543		44
	2660～2719	2662～2721	3544～3623	3544～3623		45
	2720～2779	2722～2781	3624～3703	3624～3703		46
	2780～2839	2782～2841	3704～3783	3704～3783		47
	2840～2899	2842～2901	3784～3863	3784～3863		48
	2900～2959	2902～2961	3864～3943	3864～3943		49
	2960～3019	2962～3021	3944～3960	3944～3960		50
	3020～3079	3022～3081	－	－		51
	3080～3139	3082～3141				52
	3140～3199	3142～3201				53
	3200～3259	3202～3261				54
	3260～3319	3262～3321				55
	3320～3379	3322～3381				56
	3380～3439	3382～3441				57
	3440～3499	3442～3501				58
	3500～3559	3502～3561				59
	3560～3619	3562～3621				60
	3620～3679	3622～3681				61
	3680～3739	3682～3741				62
	3740～3799	3742～3801				63
	3800～3859	3802～3861				64
	3860～3919	3862～3921				65
	3920～3960	3922～3960				66
P	60		80		105

Alterations

Alterations	Code	Spec.
2 Block Specification	B2	1 block added to 1-block product to ship as 2 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
3 Block Specification	B3	2 blocks added to 1-block product to ship as 3 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
4 Block Specification	B4	3 blocks added to 1-block product to ship as 4 block item. If the rail is too short to fit multiple blocks, the blocks will be shipped in a separate package.
Preload adjustment	ZA Light Preload	Change “No Preload Prodcut” -> “Light Preload Product” or “Medium Preload Product”
Preload adjustment	ZB Medium Preload
Rail Ends Cut	ES Left End Cut	ES & EB will be the distance from the edge to the center of the left-hand hole and the right-hand hole respectively. Only either ES or EB can be selected. When ES or EB is indicated, the distance from the edge to the center of the opposite side will be changed but the total rail length will remain unchanged.
Rail Ends Cut	EB Right End Cut

Precision Benchmark

●Dimensional Precision

Unit: mm

Dimensional Precision Type	Precision Standard	15.20	25.30
High・Low Linear Guides	Height H Tolerance	±0.1	±0.1
	Height H Pair Variation	±0.1	±0.1
	Width N Tolerance	0.02	0.02
	Width N Pair Variation	0.02	0.03

●Running Parallelism

Rail Length (mm)	Accuracy grade (μm)
100-200	14
200-300	15
300-500	17
500-700	20
700-900	22
900-1100	24
1100-1500	26
1500-1900	28
1900-2500	31

Product Features

Feature of Linear Guides 1: Standard rails are equipped with dust covers to prevent dirt from accumulating in the mounting holes when the equipment is in use.
Feature of Linear Guides 2: The slide rail and the slider are in contact with each other through the rolling ball, so the shaking is small, and it is suitable for equipment with precision requirements.
Feature of Linear Guides 3: Due to a point-to-surface contact, the frictional resistance is small, and it can perform subtle movements to achieve device positioning.
Feature of Linear Guides 4: It has a large allowable load because the force on the rotating surface is dispersed due to the rolling groove of the ball.
Feature of Linear Guides 5: It is suitable for high speed motion because it is not easy to produce friction heat when operating and not easily deformed by heat.

Selection Calculation

The service life of linear guide is divided into 3 categories as follows:
① Operating distance life

When the linear guide makes the linear reciprocating motion under load, the repeated stress is often applied to the rolling element (steel ball) or rolling surface (slide rail), resulting in scale-like damage, which is called fatigue stripping of material. The total moving distance before the initial stripping is called the service life of linear guide.

② Rated life

The rated life refers to the total travel distance reached by a group of linear guides moving under the same conditions, with 90% not stripping. The rated life can be calculated with the following formula based on the basic dynamic rated load and the load applied on the linear guide.

The load shall be calculated before using a linear guide. It is not easy to calculate the load during the linear reciprocating motion, because there may be vibration or impact during the motion, requiring a full consideration to the distribution of vibration or impact relative to the linear guide. Operating temperature and other factors also have great influence on the service life. Taking all these conditions into account, the above calculation formula is changed into the following one.
Rated life

③ Operating time life

The service life can be calculated by obtaining the travel distance per unit time. When the length of the stroke and the number of strokes are determined, it can be calculated according to the following formula.
Operating time life

For the specific service life and load calculation methods, please click

here.

Usage Method

■ About use of Linear Guides
① MISUMI's Linear Guides is installed with a retainer. Although the ball is not easy to fall off when the slide block is removed, the ball may fall off if the slider is removed from the rail at high speed, or tilted into the slide rail. Please disassemble the slider with care.
② Be sure to avoid colliding the ball back groove cover, otherwise it will affect the ball cycling, resulting in poor sliding.
③ If you have anti-rust requirements, please choose the Low Temp. Black Chrome Plating Surface Treatment or Stainless Steel SUS440C products.
MISUMI Economy series Linear Guides Slider Precautions

MISUMI Economy series Linear Guides Slider Precautions

■ About maintenance of Linear Guides (supply of grease)
① Grease forms an oil film on the surface of the Linear Guides ball and rail surface to effectively reduce friction and prevent sintering.
Decrease and aging of grease will greatly affect the life of the Linear Guides, so please add grease at the right time according to the service conditions.
MISUMI's Linear Guides are sealed with the greases at the time of shipment, so they can be used directly.
② Recommend grease filling interval:

Usually, perform the grease filling maintenance once every 3 months.
The specific maintenance time shall be adjusted according to the actual situation. It is recommended to check the grease condition once every 100 km.
* The above is the grease filling interval under the moving distance standard. Depending on the operating environment, the grease injection interval must be shortened appropriately when the grease is aging and dirty.

Precautions

For normal use, the installation of the Linear Guides needs to meet the following four points: ① Whether the shape of the mounting surface produces interference
Required shape of linear guide mounting surface

Required shape of linear guide mounting surface

② Keep the flatness of the workpiece mounting surface at about 5μ, otherwise the slider will be slightly deformed
Flatness of MISUMI mounting surface

③ Whether the error values of Linear Guides parallelism and fitting height are within the allowable installation values
MISUMI parallelism error tolerance

Allowable height error tolerance of linear-guides

④ Linear Guides Use the standard

installation method of Linear Guides Click

here for the detailed installation method

Example of Use

Mechanism name: Belt-driven handling device
Feature of Linear Guides 1: Suitable for medium precision and medium frequency driving and positioning.
Feature of Linear Guides 2: A Linear Guides is configured in the center to achieve miniaturization.

For details, click

here

Application Industries

Medical		Smart phone

Robotics		Electronic & Electrical Appliances

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-HLGWHA20-[160-1960/1]
C-HLGWHA25-[160-1960/1]
C-HLGWHA30-[160-1960/1]
C-HLGWHA35-[200-1960/1]
C-HLGWHA45-[200-1960/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Rail Length L (mm)	Assembly Height H (mm)	Nominal Part Number	Set / Single Item	No. of Blocks	Lubrication Type	L Dimension Type	Applicable Linear Guide	Block Material (Surface Treatment)	Rail Material (Surface Treatment)	Rail Surface Treatment
-	1 Piece(s)	3 Day(s)	10	160 ～ 1960	30	20	Set	1	Lithium Grease Filled	Specified Type	-	Carbon Steel	Carbon Steel	none
-	1 Piece(s)	3 Day(s)	10	160 ～ 1960	36	25	Set	1	Lithium Grease Filled	Specified Type	-	Carbon Steel	Carbon Steel	none
-	1 Piece(s)	3 Day(s)	10	160 ～ 1960	42	30	Set	1	Lithium Grease Filled	Specified Type	-	Carbon Steel	Carbon Steel	none
-	1 Piece(s)	3 Day(s)	10	200 ～ 1960	48	35	Set	-	-	-	-	-	-	-
-	1 Piece(s)	3 Day(s)	10	200 ～ 1960	60	45	Set	-	-	-	-	-	-	-

Basic Information

Block Type	Wide Long Block	Rail Type	Standard Rail	Preload	Normal Clearance
Accuracy Standards	Standard Grade	Material	Carbon Steel	Ball Arrangement	Medium, Heavy Load Type
Retainer	N/A	Lubrication Type	Lubrication Applied	Rolling Element	Ball

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Can linear guides or sliders be purchased separately?: Answer: Taking into account the accuracy of products, single slider models clearly indicated in the catalog can be purchased, and no others can be purchased.
Question: Linear guide indicators include basic dynamic load rating and basic static load rating. Which indicator is the reference when selecting?: Answer: The basic dynamic load rating is used to calculate the rail life, and the basic static load rating is used to calculate the maximum allowable load.
Question: What problems should be paid attention to when the linear guide is installed vertically?: Answer: Attention should be paid to prevent the slider from falling off and causing the balls to fall off during installation.
Question: Can the rail or slider be repaired if it is damaged?: Answer: Repair service is not provided, re-purchase is recommended.
Question: Can the corresponding MISUMI linear guide products be selected according to the third-party guide rail model?: Answer: MISUMI offers third-party brand replacement services, so as long as the third party product model is given, we can replace it with corresponding MISUMI model. For details, please contact the customer service email or call the customer service phone.
Question: Can linear guide length be arbitrarily specified?: Answer: It can be specified arbitrarily. However, MISUMI linear guides are divided into length fixed type and length specified type, and in case of length specified type, the length dimensions for length fixed type cannot be specified.

Check other FAQ (3 items) Hide

Miniature Linear Guides Standard light preloading type	Miniature Linear Guides Wide slide rail type	Heavy Load Linear Guides

Typical Linear Guides model: SSEB10-55	Typical Linear Guides model: SSEBW12-200	Typical Linear Guides model: SXR24-280

Search by Category / Brand

Search by Category

How can we improve?