What brand is the linear bearing of FA?

The linear bearing of FA is MISUMI brand.

What is the difference between the single liner type and the double liner type of linear bearing of FA?

Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.

Comparison of antirust ability of linear bearings?

Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment. Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.

Is there a product stamp on the linear bearing?

There is no stamp on the product body, and the product model is on the packaging box.

When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?

The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.

How to deal with oil leakage in the received linear bearing?

Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.

How much load does linear bearing carry?

For specific load carried, refer to Load Carried information

Can linear bearing be rotated?

The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-LM10LUU

type Inscribed Circle Dia. dr Overall Length L Outer Dia. D Eccentricity CAD Days to Ship

Specification/Dimensions

type
- C-LML
Clear
Inscribed Circle Dia. dr(Ø)
6

8

10

12

16

20

25

30
Clear
Overall Length L(mm)
35

45

55

57

70

80

112

123
Clear
Outer Dia. D(Ø)
12

15

19

21

28

32

40

45
Clear
Eccentricity(µm)
30

40
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Linear Bushings Double Liner Standard (C-LM10LUU)

Volume Discount

Check FAQ of this product (9 items)

Brand :

MiSUMi Economy

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Linear Bushings Double Liner Standard
These Linear Bushings are an economy item, The price is cheaper than the MISUMI standard product.They offer a wide variety of sizes to choose from.
● Support Shaft Diameter Minimum/Maximum (mm.): 6 and 30
● Overall Length Minimum/Maximum (mm.): 35 and 123
● Shape : Straight
● Material:
- Housing - SUJ2 Equivalent
- Ball - SUJ2 Equivalent
[Application]
It is used in industrial machinery such as conveyor systems, packaging machines, and robotic equipment.

Economy Double Liner Standard Linear Bushing

Double linerLow NoiseHeavy-Duty

- Cost-effective double liner bushing for heavy-duty applications.

- Low noise and high durability for smooth operation.

- Supports a range of shaft diameters

- Electroless nickel plating option for enhanced rust prevention.

- Perfect for industrial machinery and packaging machines.

Economy Double Liner Standard Linear Bushing

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Linear Bushings Product Overview

Linear Bushings is a linear type motion guiding mechanism matched with linear guide shaft. The steel ball rolls circularly along the track groove formed by the shell and the retainer, and the linear bearing reciprocates linearly relative to the guide shaft.
Through the rolling of steel ball, high-efficiency movement with low friction resistance can be realized.

Linear Bushings Product Feature

Feature 1: The maximum price reduction is 63% compared with the standard product of MISUMI
Feature 2: Holding high durability, low noise

■ Test conditions
• Linear Bushings (inner diameter 16) is matched with MISUMI guide shaft (PSFJ) to apply 63kg load and walk for 30km, and confirm the product damage and sliding noise.
Product Feature Drawings

■ Test results
The economy series product ensures smooth sliding of steel ball, which have good durability and low noise
Product Feature Drawings

*Products circulating on the market are similar products randomly purchased by our company from online or offline markets
*The test data are obtained through testing by our company, which are for reference only

Dimensional Linear Bushings Drawing

Linear bearing Economic type linear bearing Linear bearing standard type Sliding bushing Linear motion bearing Sliding bearing Linear motion specification Sliding bearing with housing Sliding linear ball bushing LINEAR BUSHINGS STANDARD TYPE -SINGLE BUSHING LENGTH-

This product is delivered at the initial stage, the color of the packing may be inconsistent with the photo, which shall be subject to the actual product.

Linear Bushings Specifications Overview

Type	dr[Φ:mm]	Housing			Ball	Retainer	Operating environment temperature	Accessories
Type	dr[Φ:mm]	Material	Hardness	Surface Treatment	Material	Material	Operating environment temperature	Accessories
C－LM__LUU	6~30	Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	-20~80℃	Seal packing Material Nitrile Rubber

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.

Linear Bushings Usage Method

Product Drawings	Instructions for use
	When the linear bearing is under heavy load (unbalanced load), one piece of single liner type is not applicable. It is recommended to use one piece of double liner type or multiple pieces of single liner type.
	Linear Bushings is not suitable for rotating motion in structure. If you rotate forcibly, it may cause damage to the product. Please pay attention during use.
	Linear Bushings is not suitable for repeated plugging and unplugging.
	When inserting the guide shaft into the linear bearing, please align the center and insert it slowly, otherwise the steel ball will fall off or the retainer will be deformed.

Linear Bushings Precautions

■ Regular maintenance:
① Linear Bushings Before use, please apply grease to the ball row inside the linear bearing, and then replenish it in due course. Grease forms an oil film on the surfaces of steel ball and rolling surface (guide shaft·bushing) of linear bearing, which effectively reduces friction and prevents sintering. Grease reduction and aging will greatly affect the life of linear bearing.
② Recommended grease: lithium soap grease.
③ Recommended grease filling interval: Usually every 6 months.
When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.

■ Dust prevention measures:
If dust or foreign matter enters the inside of the linear bearing, it may damage the circulation of steel balls, resulting in unexpected failures. When used in harsh environment, please install dust cover and protection cover, etc.

■ MISUMI linear bearing is recommended to be combined with guide shaft with quenching g6 tolerance.

■ MISUMI linear bearing is recommended to be installed on the holder with H7 tolerance. The linear bearing is in clearance fit with the holder.

Example of Use Linear Bushings

Equipment Name:
Stamping die position adjustment component

Design Purpose:
Adjust the position of the stamping die to correct the deviation of the opening position in the width direction of the sheet workpiece.

Application Description:
By matching with the cylinder, it realizes the guidance of the linear motion of the workpiece in the horizontal direction.

Linear Bushings Application Industries

Electronic & Electrical Appliances	Automotive	Lithium battery

LCD	Smart phone	Semiconductor

Linear Bushings Related Products

Guide shaft Straight bar type	Linear bearing holder assembly Block widened double liner type	Linear bearing Standard type Straight type

Typical model: SFJ20-75	Typical model: LHBBW8	Typical model: LMUW8

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-LM10LUU

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Dia. D (Ø)	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)
	₹ 282.00	1 Piece(s)	Available	Same day	10	55	19	30	588	1100	-0.013

Specification Table

		Part Number
		C-LM16LUU

■Material Specification Table

Type	Housing			Ball	Retainer	Operating environment temperature	Accessories
Type	Material	Hardness	Surface Treatment	Material	Material	Operating environment temperature	Accessories
C－LM__LUU	Equivalent to SUJ2	58HRC～	－	Equivalent to SUJ2	Resin	-20~80℃	Seal packing Material Nitrile Rubber

■ Dimension Specification Table

Part Number			D		L		B		W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	Basic Rated Load		Static allowable torque (N·m)
Type	dr	Tolerance		Tolerance		Tolerance		Tolerance	W	D₁	Lateral Misalignment (maximum)	Number of ball rows	Weight (g)	C (Dynamic) N	Co (Static) N	Static allowable torque (N·m)
C－LM__LUU	6	+0.003 -0.012	12	0 -0.015	35	+0.3 -0.6	24.8	0 -0.4	1.1	11.5	0.03	4	14	324	529	2.18
	8		15		45		32.8		1.1	14.3			25	431	784	4.31
	10		19		55		41.4		1.3	18			48	588	1100	7.24
	12		21	0 -0.018	57		43.4		1.3	20			52	657	1200	10.9
	16		28	0 -0.018	70		49.8		1.6	27		5	141	1230	2350	19.7
	20	+0.003 -0.013	32	0 -0.021	80		57.8		1.6	30.5	0.04	5	161	1400	2740	26.8
	25		40		112	+0.3 -0.7	78.3	0 -0.5	1.9	38		6	402	1560	3140	43.4
	30		45		123	+0.3 -0.7	85.3	0 -0.5	1.9	43		6	448	2490	5490	82.8

If there are requirements for rust prevention, give priority to products with surface treatment of electroless nickel plating or those with low temperature hard chromium plating.

For adjusting ring for linear bearing, linear bearing stopper.

Basic Information

Type	Straight	Style	Standard	Outer Cylinder Material	SUJ2 Equivalent
Outer Cylinder Surface Treatment	No Surface Treatment	Lubrication Type	Not Provided	Accuracy	Standard Grade
Ball Recirculating Type	Double	Motion	Linear	Types	Straight
Length	Double	Ball Material	SUJ2 Equivalent	Retainer Material	Plastic
Seal	Provided	No.	None

Please check the type/dimensions/specifications of the part C-LM10LUU in the Linear Bushings Double Liner Standard series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What brand is the linear bearing of FA?: Answer: The linear bearing of FA is MISUMI brand.
Question: What is the difference between the single liner type and the double liner type of linear bearing of FA?: Answer: Single liner type is one row of steel balls, and double liner type is two rows of steel balls. Generally, the length of the double liner type is more than twice that of the single liner type, and the contact area of steel balls is longer, the radial sway is smaller, and the rated load is larger.
Question: How is linear bearing maintained regularly?: Answer: MISUMI recommends that linear bearing is regularly replenished with grease, and it is recommended to do so once every six months. When the moving distance is long, it is recommended to move once every three months or when the moving distance exceeds 1000km within the time limit, the 1000km shall prevail.
Question: Comparison of antirust ability of linear bearings?: Answer: Antirust ability from strong to weak: Low Temp. Black Chrome Plating → No-Electro Nickel Plated → No Surface Treatment.
Ordinary bearing steel and stainless steel (SUS440C) are easy to rust, so it is necessary to apply anti-rust oil regularly.
Question: Is there a product stamp on the linear bearing?: Answer: There is no stamp on the product body, and the product model is on the packaging box.
Question: When the linear bearing and the guide shaft are used together, some are closely matched, but some have relatively large clearance. Does it affect the use?: Answer: The linear bearing and the guide shaft are in point contact and rolling fit through the circulating steel ball structure. Because of point contact and non-interference fit, it is normal to Provided Clearance between the shaft and the bearing, which will not affect the use. The use of this structure greatly reduces the friction resistance and prolongs the service life of the workpiece.
Question: How to deal with oil leakage in the received linear bearing?: Answer: Linear bearing is coated with anti-rust oil (except for MX grease device) when leaving the factory, which has little influence on grease. It is recommended to clean it with ultrasonic cleaner or engine oil before use and apply grease after drying.
Question: How much load does linear bearing carry?: Answer: For specific load carried, refer to Load Carried information
Question: Can linear bearing be rotated?: Answer: The linear bearing is not suitable for rotating motion in structure. If it is forcibly rotated, it may cause damage to the product. If rotating motion is required, please give priority to linear type rotating bushings.

Check other FAQ (6 items) Hide

Product variants

Part Number
C-LM12LUU
C-LM16LUU
C-LM20LUU
C-LM25LUU
C-LM30LUU
C-LM6LUU

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	Inscribed Circle Dia. dr (Ø)	Overall Length L (mm)	Outer Dia. D (Ø)	Eccentricity (µm)	Basic Load Rating: Dynamic Load (Details) (N)	Basic Load Rating: Static Load (N)	Inscribed Circle Dia. Tolerance (Negative Side) (mm)
₹ 288.00	1 Piece(s)	Available	Same day Stock	12	57	21	30	657	1200	-0.013
₹ 339.00	1 Piece(s)	Available	Same day Stock	16	70	28	30	1230	2350	-0.013
₹ 346.00	1 Piece(s)	Available	Same day Stock	20	80	32	40	1400	2740	-0.015
₹ 609.84	1 Piece(s)	Available	Same day Stock	25	112	40	40	1560	3140	-0.015
₹ 728.91	1 Piece(s)	Available	Same day Stock	30	123	45	40	2490	5490	-0.015
₹ 271.00	1 Piece(s)	Available	Same day Stock	6	35	12	30	324	529	-0.013

Search by Category / Brand

Search by Category

How can we improve?