What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What is the basic rated life of rolling bearings?

The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.

What is the noise level of this kind of products?

The noise level of this kind of products reaches Z1 standard.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(35 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-SE602ZZ

Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) type CAD Days to Ship

Specification/Dimensions

Inner Dia. d(Ø)
2

2.5

3

4

5

6

8
Clear
Outer Dia. D(Ø)
5

6

7

8

9

10

11

12

13

14

15

16

17

19

22

24

28
Clear
Width B (or T)(mm)
2.3

2.5

2.6

3

3.5

4

5

6

7

8

9
Clear
Basic Load Rating Cr (Dynamic)(N)
85

104

105

106

129

167

195

196

235

258

282

288

319

324

360

484

545

547

657

677

814

875

1131

1142

1182

1665

1686

2308
Clear
type
- C-SE60
- C-SE62
- C-SE63
- C-SE67
- C-SE68
- C-SE69
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Small Ball Bearings Stainless Steel

Name: Small Ball Bearings Stainless Steel
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (5 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-SE602ZZ SALE

C-SE603ZZ SALE

C-SE604ZZ SALE

C-SE605ZZ SALE

C-SE606ZZ SALE

C-SE608ZZ SALE

C-SE623ZZ SALE

C-SE624ZZ SALE

C-SE625ZZ SALE

C-SE626ZZ SALE

C-SE628ZZ SALE

C-SE633ZZ SALE

C-SE634ZZ SALE

C-SE635ZZ SALE

C-SE636ZZ SALE

C-SE638ZZ SALE

C-SE673ZZ SALE

C-SE674ZZ SALE

C-SE675ZZ SALE

C-SE676ZZ SALE

C-SE602ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Small Ball Bearings Stainless Steel
These bearings are often used in applications such as medical devices, food processing equipment. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 2 and 8
● Outer Diameter Minimum / Maximum (mm.) : 5 and 28
● Width Minimum / Maximum (mm.) : 2.3 and 9
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial / Thrust Load or Axial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Ball Bearing

Stainless steel ball bearings Corrosion-resistant Precision Rotary Motion Components

- Precision-engineered for smooth rotary motion

- Stainless steel construction for corrosion resistance

- Versatile sizes for various applications

- Double-shielded design for dust protection

- Capable of high-speed operation

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview of Ball Bearings

・ Deep groove ball bearing is the most commonly used rolling bearing. It is of simple structure and easy to use.
・ This kind of bearing has small friction coefficient and high limit speed.
・ The material of this bearing is equivalent to SUS440C, which has a certain antirust ability.
・ The noise level of this bearing reaches Z1.

Product Feature of Ball Bearings

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type bearings, there are Ball Bearings with steel dust cover, bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Drawing of Ball Bearings

Product Dimensional Drawing
Stainless steel small diameter ball bearing Dimensional drawing

Material Equivalent to SUS440C
Bearing accuracy GB 307 PO
JIS B 1514 Grade 0

Example of Ball Bearings Use

Precautions for Using Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the ball bearings will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Bearing heater	Proper installation of the Ball Bearings heater can guarantee a long life of the Ball Bearings. Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly. After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Bearing puller	When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly. (a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole. (b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole. (c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Related Products of Ball Bearings

Nut for Ball Bearings/Lock washer assembly	Heavy load lock nut	Ball Bearings grease

Typical model: LJNK20	Typical model: HLB10	Typical model: NS7

Specification Table of Ball Bearings

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of economy series products (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	r (min.)	Key points of economy series parts confirmation ① Basic rated load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions			Weight (g) (Reference)
								Ds (min.)	dh (max.)	R (max.)
					Cr (Dynamic) N	Cor (Static) N		Ds (min.)	dh (max.)	R (max.)
C-SE682ZZ	2	5	2.3	0.08	85	24	8000	2.7	3.9	0.08	0.17
C-SE692ZZ		6	3	0.15	167	47	8000	3	4.8	0.15	0.38
C-SE602ZZ		7	3.5	0.15	195	60	8000	3.2	5.8	0.15	0.58
C-SE682AZZ	2.5	6	2.6	0.08	105	35	8000	3.7	4.9	0.08	0.29
C-SE692AZZ	2.5	7	3.5	0.15	195	60	8000	3.85	5.65	0.15	0.55
C-SE673ZZ	3	6	2.5	0.1	106	35	8000	3.6	5.4	0.08	0.2
C-SE683ZZ		7	3	0.1	196	61	8000	3.9	5.8	0.1	0.45
C-SE693ZZ		8	4	0.15	282	86	8000	4.2	6.8	0.15	0.83
C-SE603ZZ		9	5	0.15	288	89	8000		7.8		1.45
C-SE623ZZ		10	4	0.15	319	104	8000		8.8		1.66
C-SE633ZZ		13	5	0.2	657	230	8000	4.6	11.4	0.2	3.33
C-SE674ZZ	4	7	2.5	0.1	129	51	8000	4.6	6.4	0.08	0.28
C-SE684ZZ		9	4	0.1	324	106	8000	5	7.8	0.1	1.01
C-SE694ZZ		11		0.15	360	131	8000	5.2	9.8	0.15	1.75
C-SE604ZZ		12		0.2	484	164	8000	5.6	10.4	0.2	2.29
C-SE624ZZ		13	5	0.2	657	230	8000	5.6	11.4	0.2	3.04
C-SE634ZZ		16	5	0.3	677	248	8000	6	14	0.3	5.21
C-SE675ZZ	5	8	2.5	0.1	104	43	8000	5.8	7.4	0.1	0.34
C-SE685ZZ		11	5	0.15	360	133	8000	6.2	9.8	0.2	1.96
C-SE695ZZ		13	4	0.2	545	205	8000	6.6	11.4		2.5
C-SE605ZZ		14	5	0.2	657	240	8000	6.6	12.4		3.48
C-SE625ZZ		16	5	0.3	875	319	8000	7	14	0.3	4.86
C-SE635ZZ		19	6	0.3	1182	421	8000	7	17	0.3	8.34
C-SE676ZZ	6	10	3	0.1	235	104	8000	7.04	9.3	0.1	0.68
C-SE686ZZ		13	5	0.15	547	209	8000	7	11.8	0.2	2.69
C-SE696ZZ		15	5	0.2	677	249	8000	7.6	13.4	0.2	3.72
C-SE606ZZ		17	6	0.3	1142	397	8000	8	15	0.3	6.08
C-SE626ZZ		19	6		1182	422	8000		17		7.94
C-SE636ZZ		22	7		1686	677	8000		20		14.5
C-SE678ZZ	8	12	3.5	0.1	258	130	8000	9.05	11.33	0.1	0.97
C-SE688ZZ		16	5	0.2	814	338	8000	9.6	14.4	0.2	4.02
C-SE698ZZ		19	6	0.3	1131	434	8000	10	17	0.3	7.18
C-SE608ZZ		22	7		1665	656	8000		20		12
C-SE628ZZ		24	8		1686	677	8000		22		17
C-SE638ZZ		28	9		2308	944	8000		26		30.3

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-SE602ZZSALE
C-SE603ZZSALE
C-SE604ZZSALE
C-SE605ZZSALE
C-SE606ZZSALE
C-SE608ZZSALE
C-SE623ZZSALE
C-SE624ZZSALE
C-SE625ZZSALE
C-SE626ZZSALE
C-SE628ZZSALE
C-SE633ZZSALE
C-SE634ZZSALE
C-SE635ZZSALE
C-SE636ZZSALE
C-SE638ZZSALE
C-SE673ZZSALE
C-SE674ZZSALE
C-SE675ZZSALE
C-SE676ZZSALE
C-SE678ZZSALE
C-SE682AZZSALE
C-SE682ZZSALE
C-SE683ZZSALE
C-SE684ZZSALE
C-SE685ZZSALE
C-SE686ZZSALE
C-SE688ZZSALE
C-SE692AZZSALE
C-SE692ZZSALE
C-SE693ZZSALE
C-SE694ZZSALE
C-SE695ZZSALE
C-SE696ZZSALE
C-SE698ZZSALE

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	2	7	3.5	195	60	0.58
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	3	9	5	288	89	1.45
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	4	12	4	484	164	2.29
₹ 74.00 ₹ 62.90	1 Piece(s)	Available	Same day	10	5	14	5	657	240	3.48
₹ 59.00 ₹ 50.15	1 Piece(s)	Available	Same day	10	6	17	6	1142	397	6.08
₹ 61.00 ₹ 51.85	1 Piece(s)	Available	Same day	10	8	22	7	1665	656	12
₹ 65.00 ₹ 55.25	1 Piece(s)	Available	Same day	10	3	10	4	319	104	1.66
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	4	13	5	657	230	3.04
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	5	16	5	875	319	4.86
₹ 67.00 ₹ 56.95	1 Piece(s)	Available	Same day	10	6	19	6	1182	422	7.94
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	8	24	8	1686	677	17
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	3	13	5	657	230	3.33
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	4	16	5	677	248	5.21
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	5	19	6	1182	421	8.34
₹ 88.00 ₹ 74.80	1 Piece(s)	Available	Same day	10	6	22	7	1686	677	14.5
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	8	28	9	2308	944	30.3
₹ 78.00 ₹ 66.30	1 Piece(s)	Available	Same day	10	3	6	2.5	106	35	0.2
₹ 64.00 ₹ 54.40	1 Piece(s)	Available	Same day	10	4	7	2.5	129	51	0.29
₹ 57.00 ₹ 48.45	1 Piece(s)	Available	Same day	10	5	8	2.5	104	43	0.34
₹ 63.00 ₹ 53.55	1 Piece(s)	Available	Same day	10	6	10	3	235	104	0.68
₹ 63.00 ₹ 53.55	1 Piece(s)	Available	Same day	10	8	12	3.5	258	130	0.97
₹ 83.00 ₹ 70.55	1 Piece(s)	Available	Same day	10	2.5	6	2.6	105	35	0.29
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	2	5	2.3	85	24	0.17
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	3	7	3	196	61	0.45
₹ 59.00 ₹ 50.15	1 Piece(s)	Available	Same day	10	4	9	4	324	106	1.01
₹ 78.00 ₹ 66.30	1 Piece(s)	Available	Same day	10	5	11	5	360	133	1.96
₹ 78.00 ₹ 66.30	1 Piece(s)	Available	Same day	10	6	13	5	547	209	2.69
₹ 69.00 ₹ 58.65	1 Piece(s)	Available	Same day	10	8	16	5	814	338	4.02
₹ 83.00 ₹ 70.55	1 Piece(s)	Available	Same day	10	2.5	7	3.5	195	60	0.55
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	2	6	3	167	47	0.38
₹ 82.00 ₹ 69.70	1 Piece(s)	Available	Same day	10	3	8	4	282	86	0.83
₹ 83.00 ₹ 70.55	1 Piece(s)	Available	Same day	10	4	11	4	360	131	1.75
₹ 72.00 ₹ 61.20	1 Piece(s)	Available	Same day	10	5	13	4	545	205	2.5
₹ 67.00 ₹ 56.95	1 Piece(s)	Available	Same day	10	6	15	5	677	249	3.72
₹ 63.00 ₹ 53.55	1 Piece(s)	Available	Same day	10	8	19	6	1131	434	7.18

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	Flat
Inner/Outer Ring Material	Stainless Steel	Specifications, Environment	Standard / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial / Thrust Load, Axial	Rolling Element Material	Stainless Steel	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What is the basic rated life of rolling bearings?: Answer: The basic rated life of rolling bearings refers to the total number of revolutions that 90% of the ball bearings can rotate without peeling when eleven groups of ball bearings of the same kind and specification rotate respectively under the same conditions.
Question: What is the noise level of this kind of products?: Answer: The noise level of this kind of products reaches Z1 standard.

Check other FAQ (2 items) Hide

Search by Category / Brand

Search by Category

How can we improve?