Urethane timing belt has changed color after being used for a period of time, will it affect the use?

No, the urethane belt may change color over time, but there is no effect on strength, etc.

What kind of belt is better to use under conditions that require high cleanliness?

The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.

The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?

The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.

Can alteration be made to the timing belt?

Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.

Is there a recommendation for metal connectors for free-end toothed timing belt?

Yes, the applicable connecting metal parts corresponding to each tooth shape are listed in the Specification Table, which can be purchased from MISUMI, please use as reference.

What are the two main types of timing belts according to their functions? What is the role?

Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.

Which tooth type of the timing belt has the smallest clearance? What will it affect?

The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(10 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-HTBO-S3M060-[40-10000/1]

Belt Type Belt Width (mm) Number of Teeth Selection type CAD Days to Ship

Specification/Dimensions

Belt Type
- S3M
- S5M
- S8M
Clear
Belt Width (mm)(mm)
6

10

15

25

30

40
Clear
Number of Teeth Selection
[40-10000/1]
Clear
type
- C-HTBO
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

12 Day(s) or Less
Clear

Specify Alterations

Open End Belts S Type

Name: Open End Belts S Type
Brand: MISUMI
Availability: PreOrder

Check FAQ of this product (7 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Price :

---
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Open End Belts S Type C-HTBO Series
It is a circular tooth profile open end timing belt. This belt always uses in an automation machine, moreover, it has varieties of pitches
[Features]
• Belt Shape: Open End
• Belt Tooth Type: S3M, S5M, S8M (round tooth profile)
• Tooth Pitch: 3, 5, 8 mm.
• Belt Width: 6, 10, 15, 25, 30 and 40 mm.
• Belt Operating Temperature Range: -20 to 60℃.
• Material:
Tooth rubber: White Urethane
Core wire: Steel wire
[Applications]
Suitable for use with a Clamp Plate for example C-TBCR-S3M, C-TBCR-S5M and C-TBCR-S8M

Economy Timing Belt - Urethane

Temperature RangeUrethane MaterialSteel Cord Reinforcement

- Customizable Length: Select from a wide range of tooth numbers to precisely match your equipment requirements.

- Versatile Belt Widths: Available in multiple widths to accommodate various shaft sizes.

- Durable Urethane Material: Offers excellent resistance to abrasion, oil, and grease, ensuring long-lasting performance.

- Steel Cord Reinforcement: Provides exceptional strength and tensile strength, preventing belt elongation and slippage.

- Wide Operating Temperature Range: Functions reliably in temperatures from -20°C to 60°C.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

The toothed timing belt is a component that transmits the rotational power generated by the motor. Driving and transmission are realized through the engagement between the teeth of timing pulleys and timing belts.
The free-end toothed timing belt is suitable for reciprocating motion and can be used in conjunction with metal parts for economy series timing belts.

Dimensional Drawing

Free end long span timing belt size standards drawing

■Material Table

Material
Body	Core Wire
Urethane (White)	Steel wire

Specifications Overview

Belt Type	Tooth pitch	Ra	Lr	H	h	i	Unit weight g/m (Width 10mm)
S3M	3	1.95	1.95	1.94	1.14	0.8	25
S5M	5	3.25	3.25	3.41	1.91	1.5	39
S8M	8	5.2	5.2	5.3	3.05	2.25	51

Urethane timing belt may change color over time, but strength, etc. will not be affected.

Operating temperature -20℃ to 60℃.
timing belt

Total length is number of teeth × tooth pitch. This is the calculated value. MISUMI takes the number of teeth as the basis for shipment.

Specification Table

Please order after selecting part number and parameters according to the selection steps timing belt

Part Number Type	-	Belt Number · Nominal Belt Width	-	Number of Teeth
C-HTBO	-	S5M100	-	1100

Type	Belt Type	Belt Nominal Width	The number of teeth Lower Limit to Upper Limit (1 tooth increments)	Allowable tension (N)
C－HTBO	S3M	060 (6mm)	40~10000	127
		100 (10mm)		145
		150 (15mm)		159
	S5M	100 (10mm)	50~10000	215
		150 (15mm)		323
		250 (25mm)		539
	S8M	150 (15mm)	60~10000	647
		250 (25mm)		1176
		300 (30mm)		1412
		400 (40mm)		1882

Total length is (number of teeth × tooth pitch).
timing belt

kgf＝N×0.101972

Product Features

Feature 1: The product has built-in steel core wire, which is more cost-effective and has a wider application range.
Feature 2: There is no exposed steel core wire on the side of the timing belt to avoid scratching the workpiece or hurting the operator.
Feature 3: It can be used in conjunction with tooth plates for connecting toothed timing belts, linear guides, single-axis drives and other products, and is suitable for equipment with a high degree of automation.
Feature 4: STD toothed transmission accuracy is high, suitable for high torque transmission. S3M type is also available for small precision equipment.
Feature 5: Free-end toothed timing belts are lighter and produce less noise than chain-driven ones and cleaner without lubricant.

Precautions

■Precautions for storage
① Avoid sunlight.
② Do not use in direct contact with water, solvent, oil, acid, alkali, UV, ozone, etc.
In particular, do not make oil adhere to the belt, otherwise it will cause the belt to swell, significantly shortening the life of the timing belt.
③ Operating temperature -20℃ to 60℃.
④ Do not accumulate in large quantities or forcibly bend.
⑤ Do not place it directly on the ground.
⑥ Do not make the belt contact with chemicals.

Example of Use

Application of long free-end belt in reciprocating motion mechanism

Equipment name: Belt driven lateral handling device
Function description:
The slit timing belt and the tooth plate for the connection of the timing belt are usually used in combination and applied in reciprocating motion mechanisms.

Application Industries

Food	Semiconductor	Smart phone

Medical	Electronic & Electrical Appliances	Lithium battery

Related Products

(Economy Series) Slit Timing Belt	(Economy Series) Timing Pulley S3M	(Economy Series) Timing Belt Connecting Tooth Plate

Typical model: C-TTBO-T5100-200	Typical model: C-HTPA16S3M100-A-P5	Typical model: C-TBCR-T5100
Advantages: Number of teeth can be freely specified, suitable for reciprocating motion	Advantages: Less wear of timing belt and longer service life	Advantages: Can prevent the belt from being too tight

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-HTBO-S3M060-[40-10000/1]
C-HTBO-S3M100-[40-10000/1]
C-HTBO-S3M150-[40-10000/1]
C-HTBO-S5M100-[50-10000/1]
C-HTBO-S5M150-[50-10000/1]
C-HTBO-S5M250-[50-10000/1]
C-HTBO-S8M150-[60-10000/1]
C-HTBO-S8M250-[60-10000/1]
C-HTBO-S8M300-[60-10000/1]
C-HTBO-S8M400-[60-10000/1]

Price	Minimum Order Qty.	Days to Ship	RoHS	Belt Type	Belt Width (mm) (mm)	Number of Teeth Selection
-	1 Piece(s)	12 Day(s)	10	S3M	6	40 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S3M	10	40 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S3M	15	40 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S5M	10	50 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S5M	15	50 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S5M	25	50 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S8M	15	60 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S8M	25	60 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S8M	30	60 ～ 10000
-	1 Piece(s)	12 Day(s)	10	S8M	40	60 ～ 10000

Basic Information

Belt Shape	Open End	Belt Tooth Surface	Standard (Single Sided)	Belt Material	Polyurethane Belt
Core Wire Material	Steel Cord	Belt Shape Type	Round Tooth Profile Super Torque	Transmission Torque	Regular Torque Transmission

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Urethane timing belt has changed color after being used for a period of time, will it affect the use?: Answer: No, the urethane belt may change color over time, but there is no effect on strength, etc.
Question: What kind of belt is better to use under conditions that require high cleanliness?: Answer: The use of urethane belts is recommended, which has significantly improved dust drop, compared to the rubber belt.
Question: The timing belt has been broken after use for a very short period of time. Is there a problem with the quality of the belt?: Answer: The timing belt is a standard product, and the same batch of products have very few individual quality problems, please refer to Main causes of premature breakage and corresponding countermeasures to troubleshoot the equipment in use.
Question: Can alteration be made to the timing belt?: Answer: Alteration cannot be made to the circumference of the timing belt, and partial alteration can be made to the width.
Question: Is there a recommendation for metal connectors for free-end toothed timing belt?: Answer: Yes, the applicable connecting metal parts corresponding to each tooth shape are listed in the Specification Table, which can be purchased from MISUMI, please use as reference.
Question: What are the two main types of timing belts according to their functions? What is the role?: Answer: Timing belts are mainly divided into transmission type and driving type. For transmission type, the load can be placed on the timing belt surface for transmission. For driving type, no load is carried, and only the role of transmitting torque is played, which is similar to the role of chain.
Question: Which tooth type of the timing belt has the smallest clearance? What will it affect?: Answer: The arc tooth type has minimum clearance, which can improve such indicators as positioning accuracy and rigidity.

Check other FAQ (4 items) Hide

Search by Category / Brand

Search by Category

How can we improve?