What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 6:30 24/11/2024 to 4:30 (IST) 25/11/2024. We apologize for the inconvenience.
Please note that the MISUMI Pune office and warehouse will be closed on November 20th due to the state election.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(15 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-EFL6700ZZ

Inner Dia. d Outer Dia. D Width B (or T) Basic Load Rating Cr (Dynamic) type CAD Days to Ship

Specification/Dimensions

Inner Dia. d(Ø)
10

12

15

17

20

25
Clear
Outer Dia. D(Ø)
15

18

19

21

22

23

24

26

28

30

32

37

42
Clear
Width B (or T)(mm)
4

5

6

7

9
Clear
Basic Load Rating Cr (Dynamic)(N)
599

648

700

1201

1341

1451

1563

1887

2020

2811

3012

3025

3212

4467

4901
Clear
type
- C-EFL6□□□ZZ
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Ball Bearings Flanged (Part Number)

Name: Ball Bearings Flanged
Brand: MISUMI
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-EFL6700ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

Ball Bearings Flanged
ฺBall bearings with flanged are commonly used in applications such as dental handpieces and miniature pumps. These bearings are available in various sizes to choose from.
[Feature]
● Bearing Size Standards: Metric System
● Inner Diameter Minimum / Maximum (mm.) : 10 and 25
● Outer Diameter Minimum / Maximum (mm.) : 15 and 42
● Width Minimum / Maximum (mm.) : 4 and 9
● Precision (JIS) : Class 0
● Bearing Type : Closed (Double Shielded (ZZ))
● Load Direction : Radial Load
[Application]
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys ,etc

Economy Flanged Ball Bearing

SUJ2 steelHigh Load CapacityRotation Speed

- Size Range: Available in various inner diameters, outer diameters, and widths.

- Size Range: Slightly larger than miniature bearings with inner diameters within specified range.

- High Load Capacity: Handles slightly heavier loads compared to smaller flanged bearings.

- Bearing Type: Deep groove ball bearing with a flange for added support.

- Versatility: Suitable for a wider range of applications requiring flange support.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Ball Bearings Overview

・ Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard Ball Bearings steel with high surface hardness and wear resistance.
・ The vibration class of the product of Ball Bearings is above Z1

Product of Ball Bearings Feature

・ The interface radius of the channel located on the inner and outer ring is slightly larger than the radius of the sphere, in arc shape. Mainly can bear radial load.
・ In addition to the open type Ball Bearings, there are bearings with steel dust cover, Ball Bearings with contact rubber seal packing and bearings with non-contact rubber seal packing, or bearings with stop ring on the outer diameter of outer ring.
・ Ball bearings with dust cover or seal packing are sealed with proper amount of high-quality grease. Deep groove ball bearings generally adopt steel plate stamped cage, which has low friction torque and accuracy grade of 0.

Dimensional Ball Bearings Drawing

Product Dimensional Drawing
(Economic type) Small diameter deep groove ball bearing with flange Double shielded

Example of Ball Bearings Use

Ball Bearings Motor
1 Motor

Ball Bearings Gear unit
2 Gear unit

Ball Bearings Machine tool
3 Machine tool

Precautions Ball Bearings

When the precision of the shaft and Ball Bearings housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the Ball Bearings load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the Ball Bearings heater can guarantee a long life of the bearing.
Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the Ball Bearings expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the Ball Bearings is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of Ball Bearings inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Specification Ball Bearings Table

Key points of Ball Bearings economy series parts confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products of Ball Bearings (μm)		Clearance of economy series products of Ball Bearings (μm)
or More	or Less	Minimum	Max.	Minimum	Max.
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25

Part Number	d	D	B	D₁	C	r (min.)	Key points of Ball Bearings economy series parts confirmation ② Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions		Weight (g) (Reference)
										Ds (min.)	R (max.)
							Cr (Dynamic) N	Cor (Static) N		Ds (min.)	R (max.)
C－EFL6700ZZ	10	15	4	16.5	0.8	0.15	599	305	15000	10.3	0.15	2.1
C－EFL6800ZZ		19	5	21	1	0.3	1,201	588	37000	12	0.3	6.1
C－EFL6900ZZ		22	6	25	1.5	0.3	1,887	891	34000	13.2	0.3	11.1
C－EFL6701ZZ	12	18	4	19.5	0.8	0.2	648	371	13000	12.4	0.2	3.4
C－EFL6801ZZ		21	5	23	1.1	0.3	1,341	729	33000	14	0.3	7.1
C－EFL6901ZZ		24	6	26.5	1.5	0.3	2,020	1,026	31000	14	0.3	13.2
C－EFL6802ZZ	15	24	5	26	1.1	0.3	1,451	877	28000	17	0.3	8.3
C－EFL6902ZZ	15	28	7	30.5	1.5	0.3	3,025	1,581	26000	17	0.3	19.9
C－EFL6703ZZ	17	23	4	24.5	0.8	0.2	700	461	9500	17.4	0.2	4.4
C－EFL6803ZZ		26	5	28	1.1	0.3	1,563	1,019	26000	19	0.3	8.9
C－EFL6903ZZ		30	7	32.5	1.5	0.3	3,212	1,796	23000	19	0.3	21.4
C－EFL6804ZZ	20	32	7	35	1.5	0.3	2,811	1,723	21000	22	0.3	19.8
C－EFL6904ZZ	20	37	9	40	2	0.3	4,467	2,577	19000	22	0.3	42.8
C－EFL6805ZZ	25	37	7	40	1.5	0.3	3,012	2,052	18000	27	0.3	26.1
C－EFL6905ZZ	25	42	9	45	2	0.3	4,901	3,178	16000	27	0.3	50.2

kgf＝N×0.101972

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 60; 90

Part Number
C-EFL6700ZZ
C-EFL6701ZZ
C-EFL6703ZZ
C-EFL6800ZZ
C-EFL6801ZZ
C-EFL6802ZZ
C-EFL6803ZZ
C-EFL6804ZZ
C-EFL6805ZZ
C-EFL6900ZZ
C-EFL6901ZZ
C-EFL6902ZZ
C-EFL6903ZZ
C-EFL6904ZZ
C-EFL6905ZZ

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 79.00	1 Piece(s)	Available	Same day	10	10	15	4	599	305	2.1
₹ 84.00	1 Piece(s)	Available	Same day	10	12	18	4	648	371	3.4
₹ 195.00	1 Piece(s)	Available	Same day	10	17	23	4	700	461	4.4
₹ 87.00	1 Piece(s)	Available	Same day	10	10	19	5	1201	588	6.1
₹ 195.00	1 Piece(s)	Available	Same day	10	12	21	5	1341	729	7.1
₹ 195.00	1 Piece(s)	Available	Same day	10	15	24	5	1451	877	8.3
₹ 195.00	1 Piece(s)	Available	Same day	10	17	26	5	1563	1019	8.9
₹ 195.00	1 Piece(s)	Available	Same day	10	20	32	7	2811	1723	19.8
₹ 243.00	1 Piece(s)	Available	Same day	10	25	37	7	3012	2052	26.1
₹ 87.00	1 Piece(s)	Available	Same day	10	10	22	6	1887	891	11.1
₹ 93.00	1 Piece(s)	Available	Same day	10	12	24	6	2020	1026	13.2
₹ 195.00	1 Piece(s)	Available	Same day	10	15	28	7	3025	1581	19.9
₹ 195.00	1 Piece(s)	Available	Same day	10	17	30	7	3212	1796	21.4
₹ 278.00	1 Piece(s)	Available	Same day	10	20	37	9	4467	2577	42.8
₹ 258.00	1 Piece(s)	Available	Same day	10	25	42	9	4901	3178	50.2

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	With Flange
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What standard does the vibration class of this bearing meet?: Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) Hide

Search by Category / Brand

Search by Category

How can we improve?