What is the difference between ball bearing and roller bearing?

The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.

What is the classification of bearings according to the shape of rolling elements?

Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.

What is the classification of bearings according to load direction?

Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.

What standard does the vibration class of this bearing meet?

The vibration class of the bearing is above Z1

(!)NOTE : Windows 7 users won’t be able to use some latest features of eCatalog/WOS since Microsoft is ending support for Windows 7 on 14 Jan, 2020. Please upgrade your system for uninterrupted services.

Tel: 0124-4688 800 Email: cs@misumi.co.in 9:00am - 5:30pm (Monday to Saturday)

ものづくりの、明日を支える。MISUMI-VONA 生産材コマース

Search by Category / Brand

Search by Category

Quote / Order

This translation is a Google translation यह अनुवाद एक Google अनुवाद है இந்த மொழிபெயர்ப்பு ஒரு கூகுள் மொழிபெயர்ப்பு ಈ ಅನುವಾದವು Google ಅನುವಾದವಾಗಿದೆ

Start chat

Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 5:30 to 17:30 (IST) 27/4/2025. We apologize for the inconvenience.
Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(60 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

C-E6000ZZ

Specification/Dimensions

Inner Dia. d(Ø)
10

12

15

17

20

25

30

35

40

45

50
Clear
Outer Dia. D(Ø)
15

18

19

21

22

23

24

26

27

28

30

32

35

37

40

42

47

52

55

58

62

65

68

72

75

80

85

90

100

110
Clear
Width B (or T)(mm)
4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

23

25

27
Clear
Basic Load Rating Cr (Dynamic)(N)
600

640

660

700

730

1280

1340

1460

1560

1890

2020

2560

2800

3010

3190

3260

3290

3430

3570

3920

4270

4330

4480

4620

4760

4940

5080

5430

5740

6580

6690

6720

6790

7070

7980

8540

8960

9240

9450

9800

9870

10150

11130

11200

11760

13650

14630

14840

15260

17990

18690

20370

22050

23450

24500

28350

37100

43400
Clear
type
- C-E6□□□ZZ
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Ball Bearings

Name: Ball Bearings
Brand: MISUMI
Availability: InStock

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (4 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Part Number :

C-E6000ZZ SALE

C-E6001ZZ SALE

C-E6002ZZ SALE

C-E6003ZZ SALE

C-E6004ZZ SALE

C-E6005ZZ SALE

C-E6006ZZ SALE

C-E6007ZZ SALE

C-E6008ZZ SALE

C-E6009ZZ SALE

C-E6010ZZ SALE

C-E6200ZZ SALE

C-E6201ZZ SALE

C-E6202ZZ SALE

C-E6203ZZ SALE

C-E6204ZZ SALE

C-E6205ZZ SALE

C-E6206ZZ SALE

C-E6207ZZ SALE

C-E6208ZZ SALE

C-E6000ZZ

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

New at MISUMI? Get 20% Discount on your First Purchase. Click to Register Now

Ball bearings are used in a variety of industrial machinery, including pumps, motors, and machine tools. These bearings are available in various sizes to choose from.

Feature:
Material: Steel/SUJ2
Bearing size: Metric
Inner Diameter-Min./Max.(mm): 10 / 50
Outer Diameter-Min./Max.(mm): 15 / 150
Width-Min./Max.(mm): 4 / 27
Tolerance Class: JIS Class 0
Bearing Type: Double Shielded Type(ZZ)
Load Direction: Radial

Application
It is used to support and guide rotating machine's components, such as shafts, wheels, pulleys, etc.

Economy Precision Ball Bearing

SUJ2 steelHigher precisionRotation Speed

- Size Range: Wider range of sizes compared to miniature bearings (10-50mm bore).

- Accuracy: Higher precision (Class 0) compared to standard bearings.

- High Load Capacity: Handles heavier loads compared to miniature bearings.

- Rotation Speed: Suitable for various speed applications.

- Low Friction: Efficient operation with minimal energy loss.

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product Overview

・ Ball Bearings Light load, medium · low speed, special for medium precision rotation, realizing ultra-low price.
・ It is made of industry standard bearing steel with high surface hardness and wear resistance.
・ The vibration class of the product is above Z1

Dimensional Drawing

Ball Bearings Product Dimensional Drawing
Deep groove ball bearing Dimensional drawing

Specification Table

Key points of ecconomy series products confirmation ①

Inner Diameter d (mm)		Clearance of MISUMI quality products (μm)		Clearance of Economy series products (μm)
or More	or Less	Min	Max	Min	Max
Only 10		2	13	4	18
10	18	3	18	6	23
18	24	5	20	8	25
24	30	5	20	8	25
30	40	6	20	9	25
40	50	6	23	9	28

Part Number		Inner Diameter d	Outer Diameter D	Width B	r (min.)	Key points of economy series products confirmation Basic Rated Load		Allowable Rotational Speed rpm (Reference)	Mounting Dimensions				Weight (g) (Reference)
Type	No.					Cr(Dynamic)N	Cor(Static)N		Ds		dh	R
Type	No.					Cr(Dynamic)N	Cor(Static)N		(min.)	(max.)	(max.)	(max.)
C－E	6700ZZ	10	15	4	0.2	600	300	15000	10.4	11.21	14.2	0.2	2
	6800ZZ		19	5	0.3	1280	650	24000	12	12.5	17	0.3	5
	6900ZZ		22	6		1890	890	22000		13	20		9
	6000ZZ		26	8		3190	1370	21000		13.5	24		19
	6200ZZ		30	9	0.6	3570	1670	17000	14	16	26	0.6	32
	6300ZZ		35	11	0.6	5740	2450	15000	14	16.5	31	0.6	52
	6701ZZ	12	18	4	0.2	640	370	13000	12.4	13.86	16.7	0.2	3
	6801ZZ		21	5	0.3	1340	730	22000	14	14.5	19	0.3	6
	6901ZZ		24	6		2020	1020	21000		15	22		11
	6001ZZ		28	8		3570	1670	20000		16	26		21
	6201ZZ		32	10	0.6	4270	1930	15000	16	17	28	0.6	37
	6301ZZ		37	12	1	6790	2940	14000	17	18	32	1	60
	6702ZZ	15	21	4	0.2	660	410	11000	15.4	16.86	19.7	0.2	4
	6802ZZ		24	5	0.3	1460	880	20000	17	17.5	22	0.3	7
	6902ZZ		28	7		2560	1400	18000		17.5	26		16
	6002ZZ		32	9		3920	1980	17000		19	30		30
	6202ZZ		35	11	0.6	5430	2520	14000	19	20	31	0.6	45
	6302ZZ		42	13	1	7980	3820	12000	20	22.5	37	1	83
	6703ZZ	17	23	4	0.2	700	460	9500	17.4	18.86	21.1	0.2	4
	6803ZZ		26	5	0.3	1560	1020	18000	19	19.5	24	0.3	8
	6903ZZ		30	7		3260	1810	17000		20	28		18
	6003ZZ		35	10		4760	2350	15000		21	33		39
	6203ZZ		40	12	0.6	6720	3220	12000	21	23	36	0.6	66
	6303ZZ		47	14	1	9450	4590	11000	22	25.5	42	1	113
	6704ZZ	20	27	4	0.2	730	510	8500	20.4	22.36	25.5	0.2	6
	6804ZZ		32	7	0.3	2800	1730	15000	22	22.5	30	0.3	19
	6904ZZ		37	9	0.3	4480	2590	13000	22	24	35	0.3	36
	6004ZZ		42	12	0.6	6580	3540	13000	24	26	38	0.6	69
	6204ZZ		47	14	1	8960	4660	11000	25	28	42	1	106
	6304ZZ		52	15	1.1	11130	5530	10000	26.5		45.5	1	145
	6805ZZ	25	37	7	0.3	3010	2070	13000	27		35	0.3	22
	6905ZZ		42	9	0.3	4940	3190	11000	27	29	40	0.3	42
	6005ZZ		47	12	0.6	7070	4100	11000	29	30.5	43	0.6	80
	6205ZZ		52	15	1	9800	5500	9000	30	32	47	1	128
	6305ZZ		62	17	1.1	14840	7630	8000	31.5	36	55.5	1	235
	6806ZZ	30	42	7	0.3	3290	2560	11000	32	33	40	0.3	27
	6906ZZ		47	9	0.3	5080	3500	10000	32	34	45	0.3	53
	6006ZZ		55	13	1	9240	5810	9000	35	37	50	1	116
	6206ZZ		62	16	1	13650	7910	8000	35	39	57		199
	6306ZZ		72	19	1.1	18690	10500	7000	36.5	42.5	65.5		345
	6807ZZ	35	47	7	0.3	3430	2840	10000	37	38	45	0.3	32
	6907ZZ		55	10	0.6	6690	4800	8000	39	40	51	0.6	88
	6007ZZ		62	14	1	11200	7210	8000	40	42	57	1	151
	6207ZZ		72	17	1.1	17990	10710	7000	41.5	45	65.5	1	284
	6307ZZ		80	21	1.5	23450	13440	6000	43	47	72	1.5	464
	6808ZZ	40	52	7	0.3	3570	3080	8000	42	43	50	0.3	33
	6908ZZ		62	12	0.6	8540	6230	8000	44	45	58	0.6	132
	6008ZZ		68	15	1	11760	8050	7000	45	47	63	1	190
	6208ZZ		80	18	1.1	20370	12460	6000	46.5	51	73.5	1	366
	6308ZZ		90	23	1.5	28350	16800	5000	48	53	82	1.5	636
	6809ZZ	45	58	7	0.3	4330	3770	8000	47	47.5	56	0.3	42
	6909ZZ		68	12	0.6	9870	7560	7000	49	50	64	0.6	148
	6009ZZ		75	16	1	14630	10640	6000	50	53.5	70	1	241
	6209ZZ		85	19	1.1	22050	14280	5000	51.5	55.5	78.5	1	420
	6309ZZ		100	25	1.5	37100	22400	5000	53	61.5	92	1.5	829
	6810ZZ	50	65	7	0.3	4620	4260	7000	52	52.5	63	0.3	65
	6910ZZ		72	12	0.6	10150	8190	6000	54	55	68	0.6	145
	6010ZZ		80	16	1	15260	11620	6000	55	57.5	75	1	261
	6210ZZ		90	20	1	24500	16240	5000	56.5	60	83.5	1	459
	6310ZZ		110	27	2	43400	26600	4000	59	68	101	2	1060

Product Features

・The grooves on the inner and outer rings are slightly larger than the ball radius and help handle radial loads.
・There are open-type bearings, as well as ones with steel dust covers, rubber seals (contact and non-contact), or retaining rings.
・Sealed or covered ball bearings come pre-lubricated. Deep groove ball bearings use stamped steel cages, have low friction, and are precision grade 0.
■Features of MISUMI Economy series Bearings
①Why are all MISUMI Economy series bearings tested for noise and vibration? And why do we insist on achieving "Z1" level?
Through the test of bearing noise and vibration, we can find out whether the bearing is defective. Bearing vibration is divided into four levels: Z0, Z1, Z2, Z3 and Z4 (Higher level, Lower noise and vibration)

②Why do we insist on using "standard wall thickness" for MISUMI Economy series bearings?

③Why do we insist on using "bearing steel" and "stainless steel" materials with excellent performance for MISUMI Economy series bearings?

※Generic products on the market are similar products randomly purchased by our company from online or offline markets.
※The test data are obtained through testing by our company, which are for reference only.

Precautions

Ball Bearings When the precision of the shaft and bearing housing is poor, the bearing will be affected, and its due performance will not be exerted. For example, the poor precision of the mounting part with the bearing will cause relative inclination of the inner and outer rings. At this time, besides the bearing load, the edge load will be increased additionally, which will shorten the fatigue life of the bearing, and even more seriously, it will lead to damage such as cage breakage and sticking.

Please use the following special mounting tool for installation and removal

Ball Bearings heater
Bearing heater

Proper installation of the bearing heater can guarantee a long life of the bearing.
Rolling bearings are reliable mechanical components with long service life if they are installed and maintained correctly.
After the induction heater is used for heating, the bearing expands outward in the cylindrical direction, which can avoid the damage during installation. Induction heater is one of the most scientific heating methods, which does not need preheating, and can be heated to 110℃ in a few seconds or minutes depending on the weight of bearings, without damaging the prior lubrication

Ball Bearings puller
Bearing puller

When the installation state of the bearing is in the following situations, the special puller can be used for disassembly.
(a) Shaft shape: cylindrical shaft, Inner diameter shape of bearing inner ring: cylindrical hole.
(b) Shaft shape: cylindrical shaft, inner diameter shape of bearing inner ring with tight bushing: tapered hole.
(c) Shaft shape: tapered shaft, Inner diameter shape of bearing inner ring: tapered hole. In either state, the lock nut of the shaft (or the lock nut of the tight bushing) must be released during disassembly, and the lock nut must be placed in a loose state.

Example of Use

Motor

Gear unit

Machine tool
3 Machine tool

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
C-E6000ZZSALE
C-E6001ZZSALE
C-E6002ZZSALE
C-E6003ZZSALE
C-E6004ZZSALE
C-E6005ZZSALE
C-E6006ZZSALE
C-E6007ZZSALE
C-E6008ZZSALE
C-E6009ZZSALE
C-E6010ZZSALE
C-E6200ZZSALE
C-E6201ZZSALE
C-E6202ZZSALE
C-E6203ZZSALE
C-E6204ZZSALE
C-E6205ZZSALE
C-E6206ZZSALE
C-E6207ZZSALE
C-E6208ZZSALE
C-E6209ZZSALE
C-E6210ZZSALE
C-E6300ZZSALE
C-E6301ZZSALE
C-E6302ZZSALE
C-E6303ZZSALE
C-E6304ZZSALE
C-E6305ZZSALE
C-E6306ZZSALE
C-E6307ZZSALE
C-E6308ZZSALE
C-E6309ZZSALE
C-E6310ZZSALE
C-E6700ZZSALE
C-E6701ZZSALE
C-E6702ZZSALE
C-E6703ZZSALE
C-E6704ZZSALE
C-E6800ZZSALE
C-E6801ZZSALE
C-E6802ZZSALE
C-E6803ZZSALE
C-E6804ZZSALE
C-E6805ZZSALE
C-E6806ZZSALE
C-E6807ZZSALE
C-E6808ZZSALE
C-E6809ZZSALE
C-E6810ZZSALE
C-E6900ZZSALE
C-E6901ZZSALE
C-E6902ZZSALE
C-E6903ZZSALE
C-E6904ZZSALE
C-E6905ZZSALE
C-E6906ZZSALE
C-E6907ZZSALE
C-E6908ZZSALE
C-E6909ZZSALE
C-E6910ZZSALE

Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)
₹ 35.00 ₹ 29.75	1 Piece(s)	Available	Same day	10	10	26	8	3190	1370	19
₹ 52.00 ₹ 44.20	1 Piece(s)	Available	Same day	10	12	28	8	3570	1670	21
₹ 57.00 ₹ 48.45	1 Piece(s)	Available	Same day	10	15	32	9	3920	1980	30
₹ 91.00 ₹ 77.35	1 Piece(s)	Available	Same day	10	17	35	10	4760	2350	39
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	20	42	12	6580	3540	69
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	25	47	12	7070	4100	80
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	30	55	13	9240	5810	116
₹ 141.00 ₹ 119.85	1 Piece(s)	Available	Same day	10	35	62	14	11200	7210	151
₹ 274.00 ₹ 232.90	1 Piece(s)	Available	Same day	10	40	68	15	11760	8050	190
₹ 407.00 ₹ 345.95	1 Piece(s)	Available	Same day	10	45	75	16	14630	10640	241
₹ 566.00 ₹ 481.10	1 Piece(s)	Available	Same day	10	50	80	16	15260	11620	261
₹ 70.00 ₹ 59.50	1 Piece(s)	Available	Same day	10	10	30	9	3570	1670	32
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	12	32	10	4270	1930	37
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	15	35	11	5430	2520	45
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	17	40	12	6720	3220	66
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	20	47	14	8960	4660	106
₹ 159.00 ₹ 135.15	1 Piece(s)	Available	Same day	10	25	52	15	9800	5500	128
₹ 159.00 ₹ 135.15	1 Piece(s)	Available	Same day	10	30	62	16	13650	7910	199
₹ 406.00 ₹ 345.10	1 Piece(s)	Available	Same day	10	35	72	17	17990	10710	284
₹ 528.00 ₹ 448.80	1 Piece(s)	Available	Same day	10	40	80	18	20370	12460	366
₹ 820.00 ₹ 697.00	1 Piece(s)	Available	Same day	10	45	85	19	22050	14280	420
₹ 671.00 ₹ 570.35	1 Piece(s)	Available	Same day	10	50	90	20	24500	16240	459
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	10	35	11	5740	2450	52
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	12	37	12	6790	2940	60
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	15	42	13	7980	3820	83
₹ 181.00 ₹ 153.85	1 Piece(s)	Available	Same day	10	17	47	14	9450	4590	113
₹ 246.00 ₹ 209.10	1 Piece(s)	Available	Same day	10	20	52	15	11130	5530	145
₹ 342.00 ₹ 290.70	1 Piece(s)	Available	Same day	10	25	62	17	14840	7630	235
₹ 607.00 ₹ 515.95	1 Piece(s)	Available	Same day	10	30	72	19	18690	10500	345
₹ 607.00 ₹ 515.95	1 Piece(s)	Available	Same day	10	35	80	21	23450	13440	464
₹ 884.00 ₹ 751.40	1 Piece(s)	Available	Same day	10	40	90	23	28350	16800	636
₹ 1,454.00 ₹ 1,235.90	1 Piece(s)	Available	Same day	10	45	100	25	37100	22400	829
₹ 1,273.00 ₹ 1,082.05	1 Piece(s)	Available	Same day	10	50	110	27	43400	26600	1060
₹ 77.00 ₹ 65.45	1 Piece(s)	Available	Same day	10	10	15	4	600	300	2
₹ 82.00 ₹ 69.70	1 Piece(s)	Available	Same day	10	12	18	4	640	370	3
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	15	21	4	660	410	4
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	17	23	4	700	460	4
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	20	27	4	730	510	6
₹ 62.00 ₹ 52.70	1 Piece(s)	Available	Same day	10	10	19	5	1280	650	5
₹ 73.00 ₹ 62.05	1 Piece(s)	Available	Same day	10	12	21	5	1340	730	6
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	15	24	5	1460	880	7
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	17	26	5	1560	1020	8
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	20	32	7	2800	1730	19
₹ 99.00 ₹ 84.15	1 Piece(s)	Available	Same day	10	25	37	7	3010	2070	22
₹ 104.00 ₹ 88.40	1 Piece(s)	Available	Same day	10	30	42	7	3290	2560	27
₹ 204.00 ₹ 173.40	1 Piece(s)	Available	Same day	10	35	47	7	3430	2840	32
₹ 249.00 ₹ 211.65	1 Piece(s)	Available	Same day	10	40	52	7	3570	3080	33
₹ 316.00 ₹ 268.60	1 Piece(s)	Available	Same day	10	45	58	7	4330	3770	42
₹ 370.00 ₹ 314.50	1 Piece(s)	Available	Same day	10	50	65	7	4620	4260	65
₹ 65.00 ₹ 55.25	1 Piece(s)	Available	Same day	10	10	22	6	1890	890	9
₹ 76.00 ₹ 64.60	1 Piece(s)	Available	Same day	10	12	24	6	2020	1020	11
₹ 89.00 ₹ 75.65	1 Piece(s)	Available	Same day	10	15	28	7	2560	1400	16
₹ 122.00 ₹ 103.70	1 Piece(s)	Available	Same day	10	17	30	7	3260	1810	18
₹ 135.00 ₹ 114.75	1 Piece(s)	Available	Same day	10	20	37	9	4480	2590	36
₹ 135.00 ₹ 114.75	1 Piece(s)	Available	Same day	10	25	42	9	4940	3190	42
₹ 104.00 ₹ 88.40	1 Piece(s)	Available	Same day	10	30	47	9	5080	3500	53
₹ 179.00 ₹ 152.15	1 Piece(s)	Available	Same day	10	35	55	10	6690	4800	88
₹ 335.00 ₹ 284.75	1 Piece(s)	Available	Same day	10	40	62	12	8540	6230	132
₹ 517.00 ₹ 439.45	1 Piece(s)	Available	Same day	10	45	68	12	9870	7560	148
₹ 598.00 ₹ 508.30	1 Piece(s)	Available	Same day	10	50	72	12	10150	8190	145

Part Number

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Inner Dia. d (Ø)	Outer Dia. D (Ø)	Width B (or T) (mm)	Basic Load Rating Cr (Dynamic) (N)	Basic Load Rating Cor (Static) (N)	Weight (g)

Basic Information

Raceway Ring Shape	Ball	Bearing Type	Double Shielded	Outer Ring Type	Flat
Inner/Outer Ring Material	SUJ2 Equiv.	Specifications, Environment	Standard / Dust Resistant	Precision (JIS)	Class 0
Load Direction	Radial	Rolling Element Material	SUJ2	Size Standards	Metric System
Number of Raceway Ring Rows	Single Row	Allowable Rotational Speed(rpm)	8000

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: What is the difference between ball bearing and roller bearing?: Answer: The contact between ball bearing and raceway is point contact, and the contact surface is oval when stressed. Because of the point contact, resisting force value is small, and the ball bearing is suitable for the application conditions of low torque and high rotational speed. They also have the characteristics of low noise. Ball bearings have low loading capacity but can bear radial and axial loads. The contact between roller bearing and raceway is line contact, and the contact surface is square when stressed. Because of the line contact, the torque of roller bearing is higher than that of ball bearing, and its rigidity is higher. Roller bearings have higher loading capacity, and cylindrical roller bearings have retaining edges to bear slight axial loads.
Question: What is the classification of bearings according to the shape of rolling elements?: Answer: Rolling bearings are mainly divided into: ball bearings and roller bearings. Among them, ball bearings are divided into: deep groove ball bearings, angular contact bearings and radial thrust ball bearings. Roller bearings are divided into: cylindrical roller bearings, needle bearings, cone roller bearings and self-aligning roller bearings.
Question: What is the classification of bearings according to load direction?: Answer: Bearing are divided into: radial bearings and thrust bearings according to the load direction. Among them, radial bearings are divided into: radial thrust ball bearings and radial roller bearings. Thrust bearings are divided into: thrust ball bearings and thrust roller bearings.
Question: What standard does the vibration class of this bearing meet?: Answer: The vibration class of the bearing is above Z1

Check other FAQ (1 items) Hide

Top of the page

Payment Method

Credit Card

Debit Cart

Net Banking

UPI

Cheque on delivery

Online payment

Customer Service

My Account

About MISUMI

Related Sites

Social Media

MISUMI India Contact

Customer Service

Tel:+91-124-468-8800　(9:00AM - 5:30PM Monday to Saturday)
Mail:CS@misumi.co.in　(English Only)

Web Inquiry

日本語でのお問い合わせはジャパンデスクまで

Tel:+91-124-468-8808　(9:00AM - 5:30PM 月-金、9:00AM - 1:00PM 土)
Mail:japandesk@misumi.co.in　(Japanese Language Only)

Not a MISUMI customer yet?
Register and enjoy 20% Off
on your 1st order! *

Download CAD data and product data for more than 12 Mio. products.
Configure your drawing parts in the MISUMI Online Shop and save time and resources.
Reduce your process costs with the MISUMI Online Shop.

*Click here for 20% OFF T&C