Will the positioning pin rust? If so, are there any measures to prevent?

Positioning pin products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or purchase positioning pins with surface treatment, which can prevent rust in normal atmospheric environments.

Why does the positioning pin neck have a relief groove?

Because of high coaxiality, the neck also needs to be grinded. The neck grinding process requires a relief groove to ensure that the positioning pin does not produce R angle.

Can shapes and sizes other than those listed in the catalog be customized?

Yes, they can be customized. However, please show the drawings when customizing and there are certain requirements on the quantity. Please consult cs@misumi.sh.cn for details

Where are the positioning pins made?

In principle, they are made in China. Some products with high accuracy and complex surface treatment process are made in Japan.

In which case there is no center hole?

Material is SUS304, and there is no center hole when it can meet the accuracy requirements in the milling state. Or when there is a large quantity in mass production.

Why does the positioning pin have center hole?

The final machining stage is centerless grinding. There is a need for center hole positioning, so center hole is drilled for centerless grinding.

Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

How can we improve?

How can we improve?

Feedback

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

Thank you for your time.
Your feedback is essential for our continuous improvement
Privacy Policy

Thank you for your cooperation.

Thank you for your time.
Your feedback is essential for our continuous improvement
Please use the inquiry form.

Privacy Policy

Configure

Part number has not been determine

(1 Part Numbers Available)

Configure Remaining Specifications

Part Number Complete

CUG6-15

type Locating Side Outer Dia. P (Ø) Locating Side O.D. Tolerance Mounting Side Outer Dia. D Mounting Section Length L CAD Days to Ship

Specification/Dimensions

type
- CUG
- CUM
Clear
Locating Side Outer Dia. P (Ø)(mm)
3

4

5

6

8

10
Clear
Locating Side O.D. Tolerance
m6

g6
Clear
Mounting Side Outer Dia. D(mm)
3

4

5

6

8
Clear
Mounting Section Length L(mm)
10

15

20
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

Same day
Clear

Specify Alterations

Locating Pins - Straight, Tapered (CUG6-15)

Name: Locating Pins - Straight, Tapered
Brand: MISUMI
Price: 68 INR
Availability: InStock

Click this image to zoom it.

Move the mouse over or click the image to zoom

Volume Discount

Check FAQ of this product (6 items)

Brand :

MISUMI

MiSUMi Economy

MISUMI

Order Qty :
Total Price :

---
Days to ship :

---

Select part number to Order Now/ Add to Cart

CAD Download

Product Description

This Straight, Press Fit Type product archives a short lead time and low price by narrowing the size and tolerance for specific applications.

Economy Straight Tapered Locating Pin

Locating PinsPress-FitDurability

- Heat-treated SUS440C material for durability

- Press-fit design for easy installation

- Multiple diameters available for precise positioning

- Affordable pricing for bulk purchases

- High hardness ensures stability

MISUMI Standard

Cheaper Price

Product Variety

3D CAD
3D CAD Support

Product of Locating Pins Overview

The positioning Locating Pins is used for the spatial positioning in the directions of X and Y axes, mainly using the workpiece hole as the positioning benchmark or used in conjunction with bushings, in which the straight rod cone head type is simple in shape, easy to install, widely used, and adopts materials with high hardness and difficult to break. On the basis of ensuring the original accuracy, it has the characteristics of low price and fast delivery time.

Product of Locating Pins Feature

Usage outline of cheap and preferential straight rod tapered angle type positioning pins Locating Pins

Locating Pins Feature 1: Standard type with cone head. Rod diameter tolerance that can be specified for the press-fit type: m6, g6.
Locating Pins Feature 2: The material is SUS440C, which has both heat treatment hardness and certain toughness, which is suitable for various working conditions.
Locating Pins Feature 3: The installation space is small, and the straight rod cone head type positioning pin is more suitable for simple lateral positioning.
Locating Pins Feature 4: The price of economy series straight rod cone head positioning pin is more affordable than the non-economy series, which is suitable for mass purchase.

Dimensional of Locating Pins Drawing

Specifications of Locating Pins Overview

■Material Specification of Locating Pins Table

Locating Pins Type		Material	Hardness
D dimension m6	D dimension g6
CUM	CUG	Equivalent to 9Cr18 (SUS440C)	Quenching hardness 55 to 60HRC

SUS440C hardness is different from the equivalent of SUS440C (50 to 55 HRC).

If there are requirements for rust prevention, give priority to other straight rod tapered products of Locating Pins with hard chrome plating and stainless steel SUS3 series.

Example of Locating Pins Use

Low-cost MISUMI Positioning Pin Specifications and Dimensional Drawing Large Head Round

Example introduction: straight rod cone head positioning Locating Pins and shouldered bushing in pick and place mechanism
Design summary:
① An example of Locating Pins using a swing cylinder to achieve linear and rotary motion through pneumatic drive, and moving a small substrate through a suction cup.
② In the case of a long pin, if the air vent is not provided, the pin and bushing are not easy to pull out. It is necessary to provide a air vent on the bushing side or the positioning pin side.
Intended use of fixture bushing:
The axial structure of the swing cylinder can ensure positioning accuracy while saving space through the coordination of positioning pins/shouldered bushings.

Locating Pins Application Industries

Lithium battery	Semiconductor	Medical

Smart phone	Electronic & Electrical Appliances	Robotics

Related Products of Locating Pins

Bushing for positioning Locating Pins Shouldered	Bushing for positioning Locating Pins Straight type	Bushing for positioning pin Slotted hole type Shouldered type

Typical Locating Pins model: JBH6-8	Typical Locating Pins model: JBA3-8	Typical Locating Pins Model: JBPE10-P6.8-W4.82-L15
Advantages: suitable for applications where it is difficult to adjust the hole depth	Advantages: space-saving	Advantages: absorbs clearance errors

■ Dimension Specification of Locating Pins Table

Part Number			L Selection			E	C
Locating Pins TYPE		D	L Selection			E	C
<m6> CUM	<g6> CUG	3	10	15		1	0.5
		4	10	15	20	1.5	0.5
		5	10	15	20	1.5	0.5
		6	10	15	20	2	1
		8			20	2	1

Part Number

Incomplete part number.
Please use left hand selections to complete a part number.

: 30; 45; 60

Part Number
CUG6-15

Part Number	Price	Minimum Order Qty.	Volume Discount	Days to Ship	RoHS	Locating Side Outer Dia. P (Ø) (mm)	Locating Side O.D. Tolerance	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)
	₹ 68.00	1 Piece(s)	Available	Same day	10	6	g6	6	15

Overview · Features

C-VALUE Positioning pin Straight cone-shaped: Related image

Example of Use

Product TOP

Basic Information

Basic Shape	Straight / Air Vent	Insertion Guide Tip Shape	Round	Insertion Guide Specifications	Not Provided
Mounting Side Shape	Straight (Press-Fit)	Surface Treatment	Not Provided	Heat Treatment	Directly Quenching
Application	Standard Shape	Shouldered	Not Provided

Please check the type/dimensions/specifications of the part CUG6-15 in the Locating Pins - Straight, Tapered series.

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked question (FAQ)

Question: Will the positioning pin rust? If so, are there any measures to prevent?: Answer: Positioning pin products without surface treatment will rust. It is recommended to regularly apply antirust oil for maintenance or purchase positioning pins with surface treatment, which can prevent rust in normal atmospheric environments.
Question: Why does the positioning pin neck have a relief groove?: Answer: Because of high coaxiality, the neck also needs to be grinded. The neck grinding process requires a relief groove to ensure that the positioning pin does not produce R angle.
Question: Can shapes and sizes other than those listed in the catalog be customized?: Answer: Yes, they can be customized. However, please show the drawings when customizing and there are certain requirements on the quantity. Please consult cs@misumi.sh.cn for details
Question: Where are the positioning pins made?: Answer: In principle, they are made in China. Some products with high accuracy and complex surface treatment process are made in Japan.
Question: In which case there is no center hole?: Answer: Material is SUS304, and there is no center hole when it can meet the accuracy requirements in the milling state. Or when there is a large quantity in mass production.
Question: Why does the positioning pin have center hole?: Answer: The final machining stage is centerless grinding. There is a need for center hole positioning, so center hole is drilled for centerless grinding.

Check other FAQ (3 items) Hide

Product variants

Part Number
CUG4-15
CUG4-20
CUG5-10
CUG6-20
CUG8-20
CUM3-10

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Locating Side Outer Dia. P (Ø) (mm)	Locating Side O.D. Tolerance	Mounting Side Outer Dia. D (mm)	Mounting Section Length L (mm)
₹ 79.00	1 Piece(s)	Available	Same day Stock	10	4	g6	4	15
₹ 78.00	1 Piece(s)	Available	Same day Stock	10	4	g6	4	20
₹ 63.00	1 Piece(s)	Available	Same day Stock	10	5 ～ 10	g6	5	10
₹ 81.00	1 Piece(s)	Available	Same day Stock	10	6	g6	6	20
₹ 107.00	1 Piece(s)	Available	Same day Stock	10	8	g6	8	20
₹ 125.00	1 Piece(s)	Available	Same day Stock	10	3 ～ 10	m6	3	10

Search by Category / Brand

Search by Category

How can we improve?