Notice of End of Sales for Economy Series Pneumatic Equipment Category. More information.

Sheet Forming Machine

Specifications and Features

Purpose/Function

Assembly/Processing

Simple bending machine
The leading edge of the resin sheet is plastically formed into a U shape.
Environment/Operability: The operator sets the resin sheet on the processing table and presses the start button to
- ① clamp the resin sheet.
- ② The roll bar rotates 180° (resin sheet U-bend).
- ③ The heater starts to move to the left, 120 mm/2.3 sec.
- ④ The heater ON timer starts.
- ⑤ The heater moves to the right end of the resin sheet.
- ➅ The resin sheet is heated and moved 260 mm/4.9 sec.
- ⑦ The heater moves 20 mm/0.4 sec.
- ⑧ The heater stops at the left end (stroke end).
- ⑨ The heater starts to move in the right direction.
- ⑩ The resin sheet is heated and moved.
- ⑪ The heater is OFF (by timer operation).
- ⑫ The heater stops at the right end. The optimal conditions for heating by using air blow together, stopping the heater when moving to the right, and moving with air blow are determined by trial.

※ This example is for design reference only. Equipment components may differ from the actual shape.

No.	Component	Economy Type Number	Specification	Quantity	Unit Price
①	Set Screw	E-GMSSFS4-6	Screw nominal (M): 4 Length L(mm): 6 Material: Stainless steel RoHS10 compliant	2	₹ 3/Piece
②	Cable Carrier	C-MPU10-20-18-27	"Cable insertion side: Outer circumference press-fit Inner height A(mm): 10 Inner width C(mm): 20 Bending radius R(mm): 18	1	₹ 3445/Piece
③	Linear Bushing - Round Flange	E-LBF20LUU	Inner circle diameter dr(φ): 20 Total Length L(mm): 80 Outer tube material: Iron Outer tube surface treatment: None	2	₹ 681/Piece